SKIN XTC ix pen Therapy Microneedle User Manual

: June 12, 2024
: SKIN XTC

Table of Contents

ix pen Therapy Microneedle
SKIN XTC ix pen microneedle system
SKIN XTC ix pen: What you need to know
Adjustment of pin length
Speed display and adjustment
Attention
Reference Chart
Specification
General Precautions
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User manual
SKIN XTC ix pen

ix pen Therapy Microneedle

SKIN XTC ix pen microneedle system

SKIN XTC ix pen
Microneedle Therapy Skincare Treatment

SKIN XTC ix pen: What you need to know

The device consists of an electric micro needling pen and disposable pin cartridges. This manual will explain how to use each component in detail
The device is used to improve the appearance of the skin and reduce signs of aging. It is intended to stimulate the skin and reduce the signs of aging, improve the signs of aging, stimulate the skin with micro needles for collagen and elastic production
The micro channels created in the superficial skin by the device also assist with absorption of skin serums
There are 7 different types of pin cartridges designed for the device and these cartridges be used for micro needling and nano needling treatment

Introduction for wireless mode:

This device is powered by a built-in battery and can operate wirelessly. The power cable and the adaptor are used to charge the device when it is out of battery

How to charge the battery:

Connect the device to the adaptor with the power cable and plug the adaptor into a live AC outlet to charge the device. Charging will be complete within 2 hours

Charging status:

The number of speed flashes slowly when the battery capacity is at 10% remaining
The pen will turn off automatically after 1 minute while the number of speed flashes quickly

SKIN XTC ix pen: Frequency of use

Nano chips and 0.2 – 0.3 mm cartridges can be used daily.
Treatments above 0.3 mm cartridges can be used every 10 days

Take out the pin cartridge from the sterilized packaging (Fig 1)
Find the ‘U’ shape notch on the cartridge, align the notch with the dot on the bottom of the device and slightly push the cartridge into the device (Fig 2)
Lock the pin cartridge to the device by turning it clockwise
Turn the pin cartridge counter clockwise and pull it out when you would like to remove the cartridge
Start the device only when the pin cartridge is assembled correctly? Press and hold the power button for 3 seconds to turn on/off the device
During treatment create a visual mind square for the area treated, use vertical, horizontal and diagonal lines. You can also use circular motions.
Only use Nano chips for treatments directly on the lips.
Use Hyaluronic acid serum for slip
Before assembling or disassembling the needle cartridge ensure the U-shaped point of the pin cartridge is aligned with the point of the handpiece
The needle cartridge is designed for single use:
Place used cartridge pins in a trash container. If the needle cartridge is inadvertently contaminated during installation ie dropped on the floor with packaged opened/damaged, the pins may be contaminated, please disregards and get a new cartridge.

Adjustment of pin length

Use suitable pin size according to different treatment areas and skin problems
Adjust the length of the pin by turning the scale adjustment ring.
The depth of the pin should be adjusted after starting the pen.
Adjust the depth of the pin by turning the scale adjustment ring.
The depth of the pin should be adjusted after starting the pen. The scale number aligning with the scale shows the current needle path.

Speed display and adjustment

Speed display

6 Speed Adjustment
Press and hold the power button for 3 seconds to start or shut down the device. After starting the device, the speed changes once every time the power button is pressed.

Attention

The pin cartridge is designed for SKIN XTC ix pen only
Please sterilize the needle cartridge with 75% alcohol for a few minutes before use
The pin cartridge is disposable after the first treatment
Please dispose the used needle cartridge to the trash container

Reference Chart

REGION	PIN DEPTH (MM)
Forehead	0.25 – 0.5
Between the eyebrows	0.25 – 0.5
Nose	0.25
Around the orbital rim	0.25
Check and chin	0.5 – 1.0
Surgical and scar	0.5

Specification

Brand: SKIN XTC™
Model: ix pen
Product: Auto-stamp Motorized Meso-therapy Micro Needling
Adaptor:

Input 100-240V 50-60
Output 5V – 1A
Package Weight: 400 grams
Package size: 16912356mm

ITEM	QUANTITY
Hand Piece	1 pc
Adaptor	1 pc
Manual	1 pc
Power cable	1 pc
Pin Cartridge	2 pcs x 18 pins
Pen Sleeve	1 pc

Do Not:
Do not use SKIN XTC ix pen for treatment if you have:

Acne (do not)
Acne breakout (do not)
Pustules due to Rosacea (do not)
Herpes ie, cold sore on lip (do not)
Botox or fillers within 2 weeks (do not)

Do not,

Microneedle with 1.0 mm -2.5 mm cartridge at home setting (do not)
Microneedle with 1.5 – 2.5 mm cartridge setting by an Aesthetician (do not)
Microneedle with cartridge setting of 0.3 mm – 0.75 mm less than every 10 days (do not)
Microneedle with cartridge setting of 1.0 mm – 2.5 mm less than every 4-6 weeks (do not)
Microneedle if your skin has not completely healed (do not)
Microneedle if your skin has not completely healed after 10 days using a 0.75 mm (do not)
Then wait 4-6 weeks for next treatment

General Precautions

Always use medical surgical gloves on both hands
Do not touch any object except for SKIN XTC ix pen with one hand only and Hyaluronic acid serum brush with the other hand
Nano to 0.75 mm can be used in an ‘at home’ setting
1.0 mm cartridge treatment is strictly performed by a licenced Aesthetician
1.5 mm – 2.5mm cartridge treatment is strictly performed by a licenced medical doctor
Nano chip, 0.2 mm, 0.25 mm, 0.3 mm cartridges is suitable for ‘at home’ daily treatment
0.5 mm and 0.75 mm cartridges is suitable for ‘at home’ treatment every 10 days.
If your skin has not completely healed after 10 days following the use of 0.75 mm cartridge, please allow 4 weeks before your next 0.75 mm treatment
Allow 24 hours after treatment before applying make-up
Do not apply Vitamin C within 7 days of your micro needling treatment
You must ensure spots are not melanoma and are first examined by your Medical Doctor before commencing treatments.

Warranty

The warranty period of the device is 12 months. We offer repair service from the purchase date. If any of our products has damages or natural trouble, we provide replacements or repair service. The use of third-party cartridges can cause damage to the device. This could invalidate the warranty.

Contact Details
SKIN XTC LTD
71-75 Shelton St
London
WC2H 9JQ UK
Email: info@skinxtc.com
Web: www.skinxtc.com
WhatsApp +44 77097 66556
Messenger App: Robby de Graf
Website Chat box: Tidio