KARCHER G 3200 Q High Pressure Washer Instruction Manual

: August 2, 2024
: Karcher

Table of Contents

KARCHER G 3200 Q High-Pressure Washer
Specifications
Product Usage Instructions
TROUBLESHOOTING
WARRANTY INFORMATION
CUSTOMER SERVICE
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KARCHER G 3200 Q High-Pressure Washer

Specifications

Model: G 3500 QHT / HD PRO
Max Pressure: 3500 PSI
Max Water Flow: 2.6 GPM
Detergent Suction: 0.04 GPM
Engine: Honda GX200 / Karcher KXS 196cc
Fuel Type: Unleaded Gasoline
Fuel Tank Size: 0.8 gal
Detergent Tank: 0.5 gal
Engine Oil Type: SAE 10W-30
Engine Oil Capacity: 0.13 gal / 0.15 gal
Part No.: 1.107-419.0 / 1.107-469.0

Product Usage Instructions

MODEL OVERVIEW

Handle
Spray gun
Spray gun safety lock
High pressure hose
Spray wand
Quick connect nozzles
Knob
Fuel Tank
Oil Dipstick
Water inlet for garden hose
High pressure outlet
Spark plug
Water inlet filter (installed in pump)
Detergent tank
Choke
On/Off Switch
Fuel switch
Strap

*For engine details see engine manual.

Important Safety Instructions
It is crucial to follow all safety instructions provided in the manual to ensure safe operation of the high-pressure washer.

Read the operating instructions of the engine manufacturer before start-up and follow the safety instructions carefully.

WARNING
When using this product, basic precautions should always be followed, including the following:

Read all instructions before using product.
To reduce the risk of injury, close supervision is necessary when a product is used near children.
High pressure cleaners shall not be used by children or untrained personnel.
Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with the controls.
Stay alert – watch what you are doing.
Do not operate when fatigued or under the influence of alcohol or drugs.
Keep operating area clear of all persons.
Do not overreach or stand on unstable support. Keep good footing and balance at all times.
Follow the maintenance instructions specified in the manual.
To avoid risks, all repairs and replacement of should only be carried out by trained personnel.
High pressure hoses, fittings and couplings are important for the safety of the machine. Use only hoses, fittings and couplings recommended by the manufacturer.

WARNING
Risk of injection or injury, do not direct discharge stream at persons or animals.

High pressure jets can be dangerous if misused. The jet must not be directed at persons, animals, electrical devices, or the unit itself.
Do not direct the jet against yourself or others in order to clean clothes or foot-wear.
Do not use the machine within range of persons unless they wear protective clothing.
To ensure machine safety, use only original spare parts from the manufacturer or approved by the manufacturer.

DANGER
Do not spray electrical connections, electrical outlets or fixtures.

WARNING
Risk of explosion, do not spray flammable liquids. Operate only where open flame or torch is permitted.

Do not use acids, solvents, or any alkaline or flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.

CAUTION
Gun kicks back – hold with both hands.

The trigger gun safety lock prevents the trigger from accidentally being engaged. This safety feature must be engaged when replacing nozzles or not in use.

WARNING
Risk of asphyxiation: use this product only in a well ventilated area.

Ensure that any exhaust emissions are not in the vicinity of air intakes.
Operate and fuel machine in a well ventilated area, free of devices featuring an open pilot or flame such as boilers, water heaters, etc.
Running this product indoors can result in death due to carbon monoxide, a poisonous gas you cannot see or smell. Never operate indoors, even if windows and doors are open. Only use outdoor and far away from windows, doors, and openings or vents.
During use of high pressure cleaners, aero- sols may be formed. Inhalation of aerosols can be hazardous to health.
Do not use the machine if a supply cord or important parts of the machine are damaged, e.g. safety devices, high pres- sure hoses, trigger gun.

WARNING
Incorrect fuels shall not be used as they may prove hazardous.

WARNING
Always switch off the on/off switch when leaving the machine unattended.

WARNING
Risk of fire, do not add fuel when the product is operating or still hot.

CAUTION

Do not operate if fuel has been spilled. Instead, move machine to different location and avoid creating sparks.
This machine has hot surfaces which can cause burns. Operate in a safe environment and away from children.
Do not touch hot surfaces or allow accessories to contact hot surfaces.
Do not leave machine running unattended.
Avoid tipping machine on its side.

WARNING
Serious injury can result from high pressure discharge produced by pressure washers. Keep out of reach of children.

WARNING PROP 65
This product can expose you to chemicals including Lead and Diisononyl Phthalate, which are known to the State of California to cause cancer, brith defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Proper Use
This high-pressure cleaner is designed:

To clean machines, vehicles, buildings, tools, façades, decks, patios, driveways, walkways, garden equipment etc. (detergents may be required in some cleaning scenarios).
To be used with accessories, replacement parts and detergents approved by KÄRCHER. Observe the instructions provided with these detergents.

WATER SUPPLY (Cold Water Only)

WARNING
Water that has flowed through backflow preventers is considered to be non potable. Use a water filter to avoid potential damage from dirt in the water supply.

Garden hose must be at least 5/8 inch inside diameter.
Flow rate of water supply must not fall below 2.64 GPM (Gallons per minute) (10 L/Min (Liters per minute).
Flow rate can be determined by running the water for one minute into an empty 5 Gallon bucket (20 Liter container).
Supply water pressure must be greater than 40 PSI.
The water supply temperature must not exceed 104°F/40°C.
Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, fuel, oil, etc.
Always prevent debris from being drawn into the unit by using a clean water source. Use additional water filter.
Do not operate pressure washer without the water turned on.

Owner/User Responsibility
The packing material can be recycled. Please do not place the packaging into the ordinary refuse for disposal, but arrange for the proper recycling. Old appliances contain valuable materials than can be recycled. Please arrange for the proper recycling of old appliances. Please dispose your old appliances using appropriate collection systems. Notes About the ingredients (REACH)

You will find current information about the ingredients at:www.kaercher.com/REACH.

Safety Alert Symbols

DANGER
Indication of an imminent threat of danger that will lead to severe injuries or even death.
DANGER
Indication of an imminent threat of danger that will lead to severe injuries or even death.
WARNING
Indication of a potentially dangerous situation that may lead to severe injuries or even death.
CAUTION
Indication of a potentially dangerous situation that may lead to minor injuries.
ATTENTION
Indication of a potentially dangerous situation that may lead to damage to property.Indication of a potentially dangerous situation that may lead to severe injuries or even death.
CAUTION
Indication of a potentially dangerous situation that may lead to minor injuries.
ATTENTION
Indication of a potentially dangerous situation that may lead to damage to property.

The owner and/or user must have an understanding of the manufacturer’s operating instructions and warnings before using this pressure washer. Warning information should be emphasized and understood. If the operator is not fluent in English, the manufacturer’s instructions and warnings shall be read to and discussed with the operator in the operator’s native language by the purchaser/owner, making sure that the operator comprehends its contents. Owner and/or user must study and maintain for future reference the manufacturer’s instructions. The operator must know how to stop the pressure washer quickly, and understand the operations of all controls.

Save These Instructions
This manual should be considered a permanent part of this pressure washer and should remain with it if resold.

Read Engine Manual
Read engine manual (which is separate from this manual) before starting.

SAVE THESE INSTRUCTIONS

Assembly Instructions
Assemble the high-pressure washer according to the instructions provided in the manual, ensuring all components are securely connected.

Assembling

Illustration 2:
Attach handle to the frame of the pressure washer. Align holes, insert hexagonal bolts (K) and tighten with knobs (E).
Illustration 3:
Insert hexagonal bolts (C) on the tank knobs (D). Mount nozzle holder (F) as shown on the illustration, align holes, insert bolt (C) / knob (D) and tighten.
Illustration 4:
Place detergent siphon hose into the detergent tank hole of the back of the tank (B), insert until the hose end rests on the bottom of the deepest part of the tank. Place other end of the detergent siphon hose into the pump’s chemical nipple. Make sure the hose is securely attached.
Illustration 5:
Insert hexagonal bolts (C) on the tank knobs (D). Mount tank (B) to the pressure washer frame, align holes, insert bolt (C) / knob (D) and tighten.
Illustration 6:
Place quick connect nozzle kit (G) in the nozzle holder.
Illustration 7:
Push wand (H) into trigger gun (I) and then thread the connection.
Illustration 8:
Remove cap/dipstick from the engine and add correct amount of oil. Be sure oil level is between “FULL / MAX” and “ADD / MIN” marks on dipstick with machine on level surface. Place cap/dipstick back.
Illustration 9:
(For G 3500 QHT and HD Pro machine only) Remove white plug from pump and place pump vent plug.

Operating Instructions
Before starting the high-pressure washer, familiarize yourself with the controls and operation of the equipment. Ensure proper fuel and oil levels before operation.

STEP 1:
Pull the spring-loaded collar of the wand back to insert your choice of quick connect nozzle. Release the collar and push the nozzle untilthe collar clicks.

CAUTION
High pressure in nozzle area. Risk of injury caused by improperly locked nozzle.
Make sure you hear a “click” when inserting the nozzle tip into the wand.
Pull the nozzle to make sure it is seated properly before operating your unit.

STEP 2:
Attach the high pressure hose to the trigger gun. Make sure to screw the hose all the way into the trigger gun. CAUTION
Engine shipped without oil. Before starting engine, fill with oil. Do not over-fill. Do not run the engine with a high or low oil level as this can cause engine damage.
If you have further questions regarding the engine, please refer to the engine manual included with the unit.

STEP 3:
Check oil level. Oil level should always be between the “FULL” and “MAX” marks on the dipstick as shown in the picture below. Be sure the machine is level when checking the oil level. (Refer to the engines operating manual for seasonal grades). STEP 4:
Fill gasoline tank with unleaded gasoline. Do not use leaded gasoline. Cosult engine manual for appropriate octane rating Do not add oil to the gasoline.

STEP 5:
Connect the high pressure hose to the high pressure outlet on the pump. WARNING
High pressure hoses, fittings and couplings are important for the safety of the appliance. Use only hoses, fittings and couplings recommended by the manufacturer.

STEP 6:
Connect garden hose to unit’s water inlet

STEP 7:
Connect garden hose to the cold water source and turn water completely on.

Do not use hot water. (Water supply temperature must not exceed 104°F/40°C).
STEP 8:
Unlock the trigger gun safety lock. Pull Trigger gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle. STEP 9:
Open choke lever (RUN position on a warm engine), open fuel valve. STEP 10:
Turn ON/OFF switch to ON position.

STEP 11:
Pull the starter handle. If the engine fails to start after 3 pulls, squeeze the trigger gun to release pressure, and repeat step. Af ter the engine warms up enough to run smoothly push choke to run position.
WARNING
Starter cord kickback (rapid retraction) can result in bodily injury. Kickback will pull hand and arm toward engine faster than you can let go. ALWAYS relieve spray gun pressure before pulling starter cord. Pull starter cord slowly until resistance is felt, then pull rapidly.
For engine details see engine manual.

Using the Accessories
Utilize the spray gun, high-pressure hose, spray wand, and quick connect nozzles as needed for various cleaning tasks.

Quick connect nozzles
The color-coded quick connect nozzles provide a wide array of spray widths from 15° to 65° and are easily accessible when placed in the convenient nozzle holder.

15° spray angle = Yellow nozzle
For dirt accumulation over a surface.

25° spray angle = Green nozzle
For dirt accumulation over a large surface

40° spray angle = White nozzle
For moderate dirt accumulation over a large surface.

65° spray angle = Black nozzle
For operating with detergents or cleaning with low pressure.

CAUTION
High pressure in nozzle area. Risk of injury caused by improperly locked nozzle.

Make sure you hear the “click” when inserting the nozzle tip into the quick connection.

Pull the nozzle to make sure it is seated properly before operating your unit. (See OPERATING INSTRUCTIONS: Step 1)

WARNING
To avoid serious injury never point spray nozzle at yourself, other persons, or animals.

Working With Detergents
If using detergents, follow the guidelines provided in the manual for proper detergent usage with the high-pressure washer.

Detergents can only be applied with the black detergent nozzle.

STEP 1:
Install the black detergent nozzle for detergent application at low pressure.

STEP 2:
Fill the tank with Kärcher detergent diluted per manufacturer’s instructions.

STEP 3:
With the engine running, pull trigger to operate unit. Liquid detergent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.

STEP 4:
Always draw fresh water through the detergent suction tube when the cleaning job is done, to rinse/flush any remaining detergents from the injection system.

See Cleaning Tips for specific information on how to clean different surfaces.

Detergents

CAUTION
This unit has been designed for use with cleaning detergents recommended by the manufacturer. The use of other cleaning detergent may affect the operation of the machine and void the warranty.

Always Use Kärcher Detergent for Best Results
Kärcher biodegradable detergents are specially formulated to protect the environment and your pressure washer. The special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a longer life.

For Kärcher Detergents, check your retailer or visit our website:
karcher.com/us
karcher.com/ca

CAUTION
Never use:

Bleach, chlorine products or other corrosive chemicals
Liquids containing solvents (i.e., paint thinners, fuel, oils.)
Tri-sodium phosphate products
Ammonia products
- Acid-based products

WARNING
The use of these chemical, when used with high pressure cleaners, can turn into an aerosol. Inhalation of chemicals that have been aerosolized can be hazardous to health. These chemicals will harm the unit and damage the surface being cleaned. Use of these items will void the warranty.

Taking a Break
Take breaks as needed during prolonged use of the high-pressure washer to prevent fatigue and ensure safety.

…five minutes or more

STEP 1 : Move the engine ON/OFF switch to the OFF position.

STEP 2 : Release trigger and engage safety lock.

Shutting Down & Clean-Up
After use, properly shut down the high-pressure washer following the instructions and ensure thorough cleaning of all components.

STEP 1: If detergents have been used, remove detergent tank assembly and detach suction tube from tank to dispose of cleaning detergent. Insert suction tube into 0.5 gallons (1.8 L) of fresh water. Siphon water at low pressure for one minute to clear the line of residual detergent.

STEP 2: Move the engine on/off switch to the OFF position. Close the fuel valve.

STEP 3: Turn off the water source.

STEP 4: Press trigger to release water pressure.

STEP 5: Release trigger and engage gun safety lock.

STEP 6: Disconnect the garden hose from the water inlet on the unit.

STEP 7: Disconnect the high pressure hose from the high pressure outlet. Before storing the high pressure hose in the hose holder strap, wait at least 1 hour to cool down the machine.

Storage
Store the high-pressure washer in a dry and secure location, following the storage guidelines provided in the manual. After using the pressure washer wait at least 1 hour to cool down the machine before storage. Follow the instructions for a compact storage.

STEP 1 : Remove knobs and bolts from handle and store in a safe place.

STEP 2 : Remove handle from frame and align in storage tubes as indicated.

STEP 3 : Insert handle in storage tubes.

WINTERIZING AND LONG-TERM STORAGE

It is highly recommended to use Kärcher’s Pump Guard (part number 9.558-998.0 sold separately) before winter storage and during the cleaning season to protect the pump from freezing and premature wear.

STEP 1:
Move the engine ON/OFF switch to OFF position.

STEP 2:
Disconnect all hoses.

STEP 3:
Unscrew cap from Pump Guard bottle.

STEP 4:
Remove internal seal.

STEP 5:
Reattach cap to Pump Guard bottle and remove black protective cap.

STEP 6:
Screw bottle into water inlet on pressure washer pump and squeeze.

STEP 7:
Pull starter handle until fluid starts to exit the pump’s high pressure outlet.

STEP 8:
Unscrew bottle. Store or dispose properly.

CAUTION
Failure to follow the above directions may result in damage to the pump assembly and accessories and void the warranty.

Maintenance Instructions
Regular maintenance is essential for the proper functioning of the high- pressure washer. Follow the maintenance instructions outlined in the manual.

Pump

Initial Use
All pumps ship with oil already inside direct from the factory. There is no need to add oil.
Pump Inspection
You should routinely make a visual inspection of the pressure washer’s pump. If you notice oil leaking around the pump seals, you should take the pressure washer to a Kärcher-Authorized Service Center for repair. (You can locate a service center in your area online at: https://www.kaercher.com/us/find-a-dealer.html if located in the US or https://www.kaercher.com/ca/support/services/home-and-garden.html if located in Canada.
Pump Maintenance
The pump on your Kärcher pressure washer does not require maintenance. Any attempts to service or alter the pump may damage your pressure washer and void your product warranty.
Engine
Carry out maintenance tasks for the engine according to the specifications provided in the operating instructions provided by engine manufacturer.

Cleaning Tips
Refer to the cleaning tips section for additional guidance on effectively using the high-pressure washer for cleaning tasks.

Deck Cleaning
(with or without detergent). Pre-rinse deck and surrounding area with fresh water. If using Kärcher Multi-Purpose Cleaner (part number 9.558-144.0), apply to surface at low pressure. For best results, limit your work area to smaller sections of approximately 25ft² (2.3m²). Allow Kärcher Multi-Purpose Cleaner to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high pressure in a long sweeping motion keeping the spray nozzle approximately 3-6 inches (8-15 cm)from the cleaning surface. Always clean from top to bottom and from left to right. When moving on to a new section of the cleaning surface, be sure to overlap the previous section to eliminate stop marks and ensure a more even cleaning result.

Cars, Boats & Motorcycles
(with or without detergent). Pre-rinse vehicle with fresh water. If using Kärcher Vehicle Wash and Wax (part number 9.558-946.0), apply to surface at low pressure. For best results, clean one side of vehicle at a time and always apply detergent from bottom to top, do not allow detergent to dry on surface. If needed, use special wash brush attachment (not included) to remove stubborn dirt. Rinse at high pressure in a sweeping motion keeping the spray nozzle approximately 6-8 inches (15-20 cm) from the cleaning surface (distance should increase when rinsing pin-striping or other sensitive surfaces). Always clean from top to bottom and from left to right. For best results, wipe surface dry with a chamois or soft dry cloth.

House Siding
(with or without detergent). Pre-rinse cleaning surface with fresh water. If using Kärcher Multi-Purpose Cleaner (part number 9.558-144.0), apply to surface at low pressure (for best results, limit your work area to sections of approximately 6 ft. (1.8m) and always apply detergent from bottom to top). Allow detergent to remain on surface 1-3 minutes. Do not allow detergent to dry on surface, if surface appears to be drying, simply wet down surface with fresh water. If needed, use special wash brush attachment (part number 8.923-682.0 Rotating Wash Brush, sold separately)to remove stubborn dirt. Rinse at high pressure from top to bottom in an even sweeping motion keeping the spray nozzle approximately 15 cm from the cleaning surface.

Cemented Patios, Brick and Stone
(with or without detergent). Pre-rinse cleaning surface with fresh water. If using Kärcher Multi-Purpose Cleaner (part number 9.558-144.0), apply to surface at low pressure. For best results, limit your work area to smaller sections of approximately 25ft² (2.3m²). Allow Kärcher Multi-Purpose Cleaner to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high pressure in a sweeping motion keeping the spray nozzle approximately 3-6 inches (8-15 cm) from the cleaning surface. Always clean from top to bottom and from left to right. For removing extremely stubborn stains, use a Turbo Nozzle Spray Nozzle (part number 8.641-034.0, sold separately).

Barbecue Grills, Outdoor Power Equipment & Gardening Tools

(with or without detergent). Pre-rinse cleaning surface with fresh water. If using Kärcher Multi-Purpose Cleaner (part number 9.558-144.0), apply detergent at low pressure. Allow Kärcher Multi-Purpose Cleaner to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high pressure keeping the spray nozzle approximately 3-6 inches (8-15 cm) from the cleaning surface. For removing extremely stubborn dirt, it may be necessary to move the spray nozzle even closer to the surface for greater dirt cutting action.

Patio & Lawn Furniture

(with or without detergent). Pre-rinse furniture and surrounding area with fresh water. If using Kärcher Multi-Purpose Cleaner apply to surface at low pressure. Allow Kärcher Multi-Purpose Cleaner to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. If needed use special Wash Brush Attachment (part number 8.923-682.0 Rotating Wash Brush, sold separately) to remove stubborn dirt. Rinse at high pressure in a sweeping motion keeping the spray nozzle approximately 3-6 inches (8-15 cm) from the cleaning surface. For best results, clean from top to bottom and from left to right.

Recommendations

Before cleaning any surface, test spray pa-ttern and distance in an inconspicuous area.
If painted surfaces are peeling or chipping, use extreme caution as pressure washer may remove the loose paint from the surface.
When using on surfaces which might come in contact with food, flush surfaces with plenty of drinking water.
For additional cleaning tips, visit our website at karcher.com/us or karcher.com/ca

Optional Accessories
Optional accessories are available to further enhance your cleaning capabilities. These accessories are accurate as of the printing date of this manual. Please check our website: karcher.com/us or karcher.com/ca for pricing and up-to-date information.

Extension Hose
Turbo Nozzle
15″ Surface Cleaner

TROUBLESHOOTING

CAUTION
Remove the spark plug cable to prevent accidental ignition of the engine before making any repair.

If the symptom you are experiencing is not listed above, or if the provided solutions do not solve your issue, please visit our extensive online troubleshooting database at:
www.karcher-help.com or www.karcher.com/ca/support/faqs.html

WARRANTY INFORMATION

High Pressure Washers 3 Year Limited warranty
This Kärcher product is warranted by Kärcher to be free of defects in workmanship and materials under normal use.

Specific warranty applies to:

Kärcher KPS and KXS series engines are warranted for three (3) years of parts and labor and serviced by a Kärcher service center
Honda GX series engines are warranted for three (3) years of parts and labor and serviced by a Honda-authorized service center
Pumps are warranted for three (3) years of parts and labor and are serviced by a Kärcher service center
Frames, handles and detergent tanks, and other structural components, carry a three (3) year parts and labor warranty.
Standard accessories and attachments are warranted for a ninety (90) day period.
Any commercial, industrial or rental use of this equipment will VOID the warranty.

The warranty period is calculated from the date of purchase by the end user and covers the cost for replacement parts and/or equipment and warranty labor performed. In order to verify a warranty situation, the machine must be evaluated by an Authorized Kärcher Service Center or by an authorized service center representing the engine manufacturer. A copy of the original purchase receipt or gift receipt from the original retailer must also accompany the warranty claim. To locate the nearest authorized Kärcher service center, please visit our website at www.karcher-help.com or www.karcher.com/ca/support/faqs.html Your device must be registered in order to help with any questions or issues that you have. You can register your device at www.karcher-register.com.
Kärcher’s obligation under this warranty shall strictly be limited, at Kärcher’s option, either to replace or repair, through Kärcher directly or through an Authorized Kärcher Service Dealer without charge during the warranty period any part, which in the opinion of the manufacturer, shows defect in workmanship or material. Service will be scheduled according to the normal workflow and business hours at the service center, and availability of replacement parts. All decisions of Kärcher with regard to this limited warranty shall be final.

This warranty does not cover:

Merchandise sold as reconditioned, used, demonstration or floor models.
Merchandise purchased on eBay and other online auction web sites.
Damage caused by misuse, neglect, accident, abuse, improper handling, freezing, normal wear and tear or non-compliance with operator’s manual.
Damage caused by water sediment, contaminated water supply or use of chemicals and detergents not approved by or recommended by Kärcher.
Damage caused by acts of nature such as floods, fires, earthquakes, lightning strikes, etc.
Devices or accessories not distributed or approved by Kärcher. Any use of such said devices or accessories will void implied warranty.
Repairs made by the end user or any service center not authorized by Kärcher. Any such tampering with Kärcher equipment or accessories will void the implied warranty.
Any cost for shipping by the customer or authorized service center of the alleged defective part or equipment.

This warranty is non-transferable and applies only to products purchased through a Kärcher authorized reseller in the United States and Canada . Equipment provided, but not manufactured by Kärcher such as Honda and Kohler petrol engines are subject to warranties and service through said manufacturer’s service centers according to the terms and conditions provided by the respective original equipment manufacturer. Kärcher is not authorized and has no responsibility to provide warranty service for Honda. This warranty gives you specific legal rights. You may have other rights, which vary by country and state/province.

Please register online at www.karcher-register.com
Online registration is quick, free and provides you with a confirmation email for your records.

CUSTOMER SERVICE

Registration
Your device must be registered in order to help with any questions or issues that you have. You can register your device at www.karcher- register.com if located in the U.S.A., www.karcher.com/ca if located in Canada, or www.karcher.com/mx if located in Mexico.

Warranty
In the case of a warranty claim, you can contact customer support. Please see the contact information listed below for either the USA, Canada, or Mexico. You MUST provide your proof of purchase in order to file a warranty claim either via email, phone, or fax.

USA Customer Service
You can contact our Customer Service department by phone at 1-800-537-4129 or via the website at www.karcher.com/us.

Canada Customer Service
You can contact our Customer Service department by phone at 1-800-465-4980 or via the website at www.karcher.com/ca.

Mexico Customer Service
You can contact our Customer Service department by phone at 01-800-024-13-13 or via the website at www.karcher.com/mx.

Rate your product and tell us your opinion.

www.kaercher.com/dealersearch

www.kaercher.com/dealersearchAlfred
Kärcher SE & Co.
KGAlfred-Kärcher-Str.
28-4071364
Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212

FAQ

Q: Can I use any type of gasoline in the fuel tank?
A: No, only unleaded gasoline should be used in the fuel tank to ensure proper operation of the high-pressure washer.

Q: How often should I perform maintenance on the high-pressure washer?
A: Regular maintenance should be performed as per the guidelines provided in the manual, typically after a certain number of hours of operation.

Q: What should I do if the high-pressure washer does not start?
A: Check fuel and oil levels, ensure proper assembly, and refer to troubleshooting section in the manual for steps to address starting issues.