HoldPeak HP-930A Humidity Meter App User Manual
- June 13, 2024
- HoldPeak
Table of Contents
User Manual
Product Over view
What You Get
| Smart Thermo-Hygrometer | 1 |
|---|---|
| AAAbatiery | 3 |
| Lanyard | 1 |
| User Manual | 1 |
| Magnetic patch | 1 |
Specifications
| Accuracy | Temp: +0.54°F /+0.3°C, Humidity:+3% |
|---|---|
| Oprating Team | -20C~60C (-4°F~140 *F) |
| Operating Humidity | 0 % ~ 99 % |
| Bluetooth -enabled Distance | 80m/262ft (No obstacles) |
Installing Your Device
- Loosen the battery cover screw.(See Figure 1)
- Install the battery correctly according to the battery installation tips. It is recommended to place the positive electrode first and then the negative electrode (See Figure 2)
- When you need a magnet pendant, please tear off the film on the front and back of the magnetic patch and stick it at the position you want. Al the same time, tear off the fim of the magnet and stick it at the corresponding position in Figure 3, that is, you can hang the pendant.
- You can hang it with a rope.
Downloading the Intelligent Meter App
Download the “Intelligent Meter” App from the App Store (10 devices or Google
Play (Android devices)
Androld Download
- Application market search [intelligent Meter] download and use.
- Scan QR code with browser to download.
IOS Download
- Search [Intelligent Meter] in the apple store to download and use.
- Browser scan QR code download
The above product pictures and contents are for reference only. In case of any
discrepancy or update, please refer to the actual product without further
notice.
CONTACTUS
For any problem o concen, welcome 1o email us for prompt response.
AFTERSALES1010@HOTMAIL.COM
To make sure you can receive immediate solution and your requests processed
quickly, please email us with these information:
- Order Number
- Platform of Your Purchase
- Full Model Number
- Description of the Problem(Attaching videos or photos can help us troubleshoot the problems. even faster)
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modi?cations to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
APP User Manual
Please scan QR code for detailed operation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>