REDMAGIC PA3106 Turbo Cooler Transparent User Guide

REDMAGIC PA3106 Turbo Cooler Transparent

Schematic diagram of the product

• Pull the gripper on both sides to fit the mobile phone.
• Only suitable for mobile phones with a width between 70mm and 82mm.

Installation and operation

1. Download and install APP
   Please scan the QR code below to download and install the APP.
   Some types of Red Magic mobile phone supports you to dial the game button to configure and operate in the game space.
   

2. Activate the Red Magic Turbo cooler
   ① Fix the cooler on the back of the phone and make sure t hat the fit is as tight as possible.
   ② Connect the charger through Type-C data cable and ensure that the output power of the charger is 5V/2A or above.
   ③ The cooler automatically activates the heat dissipation when the gripper is pulled open and energized.

3. Set the RedMagic Turbo cooler
   ① Activate the Bluetooth of the mobile phone, and conned the cooler in the RedMagic mobile phone game space or APP.
   ② Set the lighting effect for the cooler,heat dissipation high and low gears.
   ③ Deactivate the cooler.

• The cooler with Hall switch, when pulling open the gripper of the cooler, the switch is automatically opened by default.
• When the cooler is powered on again, the previous shutdown setting is automatically cancelled .
• When the cooler is working, the temperature of the cooler decreases, the hot air in the environment will condense into water droplets attached to the surface of the cooler when it is cold, which is a normal phenomenon.
• When you stop using the device, please disconnect the power in time.

Product Specifications

Product name: RedMagic Turbo Cooler
Product model: PA3106
Connection method: Bluetooth 4.2
Supported platforms: Android 6.0 and above, iosl2 and above
Power supply interface: Type-C
Package contents: Red Magic Turbo Cooler x 1, Type-C data cable x 1, User Guide x 1

FCC Regulatory Compliance

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasona ble protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and rused in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radi o/TV technician for help
• This device and its antenna (s) must not be co-located or operating in conjunction with any other antenna or transmitter.

| WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov.
---|---

Disposal of our Old Device

• When the wheelie bin symbol is attached to a device, it means the device is covered by t he European Directive 2012/19/EU.
• All electrical and electron ic devices shou ld be disposed of separately from normal household waste via designated collection points provided by government or local authorities.
• The correct disposal of electrical and electronic products will help protect the environment and human health.

EU Declaration of Conformity (DoC)

Hereby, Nubia Technology Co., Ltd declares t hat this device is in conformity with t he Radio Equipment Direct ive: 2014 / 53 / EU.

For the declaration of conformity, visit http://www.nubia.com/en/support.[Ph p?a=download.

Manufacturer’s EU Representative:
Nubia Technology Spain S.L.
Adress: Calle Goya 15, la-Planta, Madrid, 28001
E-mail: support.eu@nubia.com

EU certified frequency band:

Safety warning:
The cooler’s normal operating tern perature is 0°C ~ 40°C. In order to ensure the normal cooler functions, do not use this cooler outside the temperature range.
This device may be used in each EU member state.

Declaration of Ro HS 2.0 Compliance

We’re determined to reduce the impact we have on the environment and take responsibility for the earth we live on. So this document allows us to formally declare that the PA3106, manufactured by Nubia Technology Co., Ltd, fu lly complies with the European Parliament’s RoHS (Restriction of Hazardous Substances) 2.0 Directive 2011/65/EU, with respect to all the following substances:
(1) Lead (Pb)
(2) Mercury (Hg)
(3) Cadmium (Cd)
(4) Hexavalent Chromium (Cr (VI))
(5) Polybrominated biphenyl (PBB)
(6) Polybrominated di phenyl ether (PBDE)
(7) Di(2-ethylhexyl) phthalate(DEHP)
(8) Di butyl phthalate (DBP)
(9) Benzyl butyl phthalate (BBP)
(10) Di isobutyl phthalate(DIBP)
Our compliance is witnessed by written declaration from our suppliers. This confirms that any potential trace contamination levels of the substances listed above are below the maximum level set by EU 2011/65/EU, or are exempt due to their application.
The PA3106 manufactured by Nubia Technology Co., Ltd meets all the requirements of EU 2011/65/EU.

Warranty Provisions

Warranty period: The warranty period commences from the date of purchase. The product and other accessories carry a warranty period according to local regulations and policy. The date on the proof of purchase or any other valid voucher will be considered as the date of purchase. For more detailed warranty information, please consult your local dealer or visit Nubia official website: http://www.nubia.com/en/

Non-Warranty Provisions

The warranty doesn’t cover products which have been handled in any of the following cases:

• Products malfunctioned or damaged due to misuse, improper use, abuse, negligence, or any improper use not according to the user manual.
• Product repaired,replaced or altered by any person other than Nubia customer service center.
• Products malfunctioned or damaged due to natural calamity, force majeure, unpredictable accidents and any other factors beyond the control of Nubia Technology Co., Ltd.
• Product altered, converted, or exchanged to meet the requirements of local electrical conditions, safety standards and communication systems by any person other than Nubia service center.
• Product whose serial nunber or warranty sticker is missing, damaged, or altered.
• Products which expire the warranty period specified in warranty card.
  If those provisions conflict with local laws and regulations, it subject to the local regulation.

Notes

If the product does not contain charger or battery, you don’ t have to fill in the
serial number.
This certificate will become effective only after stamped by a dealer authorized by Nubia Technology Co., Ltd.

Nubia Technology Co., Ltd.
Address: Room 1801, Building 2, Chongwen Park, Nanshan Zhiyuan, No.3370,
Liuxian Rd, Nanshan District, Shenzhen City, Guangdong Province, P.R. China
Official website: www.nubia.com/en/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>