REDMAGIC NX709S Smartphone User Guide
- June 9, 2024
- REDMAGIC
Table of Contents
- REDMAGIC NX709S Smartphone User Guide
- Legal notice
- Your phone at a glance
- Inserting the SIM card
- Charging the battery
- Powering On/Off Phone
- Waking Up Your Phone
- Disposal of your old phone
- Declaration of RoHS 2.0 Compliance
- EU certified frequency band
- Hardware and software
- EU Declaration of Conformity (DoC)
- Safety warning
- Health and safety
- FCC Regulatory Compliance
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
REDMAGIC NX709S Smartphone User Guide
NX709S
FCC ID:2AHJO-NX709S
Legal notice
Copyright Statement
Copyright © 2022 by Nubia Technology Co., Ltd..
All the copyrights of this document herein belong to Nubia Technology Co.,
Ltd. Without the written permission of copyright owner, no part of this
publication may be excerpted, reproduced, translated by any person or entity
in any form or by any means. This document is subject to change without prior
notice.
Nubia Technology Co., Ltd. keeps the right to make the final explanation to this document.
Trademarks
Android is a trademark of Google, Inc.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS
and the Symbol together are registered trademarks or trademarks of DTS, Inc.
in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
Snapdragon Sound is a product of Qualcomm Technologies, Inc. and/or its
subsidiaries.
Snapdragon and Snapdragon Sound are trademarks or registered trademarks of
Qualcomm Incorporated.
All other trademarks remain the property of their respective owners.
Statement of Third-party Applications
During the installation process of some third-party applications, the issues
of repeated restart or abnormal use of software might be caused by
incompatibility of the third-party applications, rather than the phone itself.
Please download your software upgrade packages from the reliable official website.
The installation of a third-party ROM or non-official operating system might bring safety risks and security threats. Nubia Technology Co., Ltd. shall not be liable for these risks and threats caused by upgrade of the operating system.
Your phone at a glance
Inserting the SIM card
- Insert the end of the eject tool into the hole of the card tray and press firmly until the tray pops out.
- Put one or two nano-SIM cards into the tray.
- Push the card tray back into the phone.
Note
Dimensions of a nano-SIM card: 9 mm*12 mm.
Charging the battery
Connect the phone to the power adapter using the included USB cable and power adapter.
Note
- Your phone and power adapter might heat up while charging.
- Use other USB cable or power adapter might decrease the life span of your phone or cause fire, explosion and other hazards.
The illustrations of products and accessories in the user guide are all
schematic diagrams and are for reference only.
Due to product updates and upgrades, the actual product and the schematic
diagram may be slightly different, please refer to the actual product.
Powering On/Off Phone
Make sure the battery is charged before powering on.
- Press and hold the Power key to turn on your phone.
- To power off, press and hold the Power key and touch ‘Swipe to power off ’.
Waking Up Your Phone
Your phone automatically goes into sleep mode when it is not in use for some time. The display is turned off to save power and the keys are locked to prevent accidental operations.
You can wake up your phone by turning on the display and unlocking the keys.
- Press the Power key to turn the screen on.
- Swipe up on the screen.
Note
If you have set an unlock pattern, a PIN, or a password for your phone, you’ll
need to draw the pattern, or enter the PIN/password to unlock the phone.
Disposal of your old phone
- When the wheelie bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU.
- All electrical and electronic products should be disposed of separately from normal household waste via designated collection points provided by government or local authorities.
- The correct disposal of electrical and electronic products will help protect the environment and human health.
Declaration of RoHS 2.0 Compliance
We’re determined to reduce the impact we have on the environment and take responsibility for the earth we live on.
So this document allows us to formally declare that the NX709S , manufactured by Nubia Technology Co., Ltd., fully complies with the European Parliament’s RoHS (Restriction of Hazardous Substances) 2.0 Directive 2011/65/EU, with respect to all the following substances:
- Lead (Pb)
- Mercury (Hg)
- Cadmium (Cd)
- Hexavalent Chromium (Cr (VI))
- Polybrominated biphenyl (PBB)
- Polybrominated diphenyl ether (PBDE)
- Di(2-ethylhexyl) phthalate(DEHP)
- Dibutyl phthalate (DBP)
- Benzyl butyl phthalate (BBP)
- Diisobutyl phthalate(DIBP)
Our compliance is witnessed by written declaration from our suppliers. This
confirms that any potential trace contamination levels of the substances
listed above are below the maximum level set by EU 2011/65/EU, or are exempt
due to their application.
The NX709S manufactured by Nubia Technology Co., Ltd. meets all the
requirements of EU 2011/65/EU.
EU certified frequency band
Hardware and software
The certified hardware version of your phone is
NX709S_V1AMB.
The certified software version of your phone is
NX709S_EUCommon_V4.03.
EU Declaration of Conformity (DoC)
Hereby, Nubia Technology Co., Ltd. declares that this device is in conformity with the Radio Equipment Directive: 2014 / 53 / EU.
For the declaration of conformity, visit
http://www.nubia.com/en/support.php?a=download.
Hereby, Nubia Technology Co., Ltd. declares that the radio equipment type
Model NX709S is in compliance with UK Radio Equipment Regulations (SI
2017/1206).
The Wi-Fi function for this device is restricted to indoor use only
when operating in the 5150 MHz to 5350 MHz frequency range.
Manufacturer’s EU Representative:
Nubia Technology Spain S.L.
address:Calle Goya 15, 1ª-Planta, Madrid, 28001
E-mail: support.eu@nubia.com
Safety warning
- To prevent possible hearing damage when using a headset, do not use high volume for long period.
- Use the earphone carefully. Excessive sound pressure from headsets and headphones can cause hearing loss.
- Adapter shall be installed near the equipment and shall be easily accessible.
- The phone’s normal operating temperature is 0°C ~ 40°C. In order to ensure the normal phone functions, do not use this phone outside the temperature range.
CAUTION
Risk of explosion if the battery is replaced by an incorrect type disposal of
a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion;
leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas;
a battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
Health and safety
The device meets international guidelines for exposure to radio waves.
Your device is a radio transmitter and receiver. It’s designed not to exceed
the limits for exposure to radio waves recommended by international
guidelines. The guidelines were developed by the International Commission on
Nonlonizing Radiation Protection (ICNIRP), an independent technical standards
body, and include margins designed to assure the safety of all persons,
regardless of age and health. These guidelines use a unit of measurement known
as Specific Absorption Rate (SAR). The SAR limit for mobile devices is 2.0
W/Kg (Head, Body-worn), 4.0 W/Kg (Limbs) and the highest
SAR value for this device when tested for use at the head was 1.139 W/Kg, when tested for use at the body-worn was 1.220 W/Kg and when tested for use at the limbs was 2.609 W/Kg.
In SAR measurement, the separation distance between the phone and test device is 5mm.
As SAR is measured when the device is on its highest transmitting power, the actual SAR of this device while operating normally is typically below the levels shown above.
This is because the device automatically changes its power level to ensure it only uses the minimum level required to reach the network.
The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of mobile devices.
Important safety information
For your own health and safety, please follow the radio frequency (RF)
radiation exposure guidelines and keep your phone no less than 5 mm away from
your body.
Failure to do this could mean that your RF exposure exceeds the guideline limits.
How to limit your radio frequency (RF) exposure
The World Health Organization (WHO) gives the following advice to people who
want to limit their exposure to RF radiation…
Present scientific information does not indicate the need for any special precautions for the use of mobile phones. If individuals are concerned, they may choose to limit their own or their children’s RF exposure by limiting the length of calls, or using ‘hands-free’ devices to keep mobile phones away from the head and body.
Further information on the subject can be obtained from the World Health
Organization website at
http://www.who.int/peh-emf WHO Fact sheet 193: June 2000.
1. The tests are carried out in accordance with IEC standard IEC 62209-2.
FCC Regulatory Compliance
FCC Regulations:
This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not expressly approved by Nubia Technology Co., Ltd.
for compliance could void the user‘s authority to operate the equipment.
RF exposure information (SAR)
This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States.
This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC
ID: 2AHJO-NX709S.
The SAR limit set by the FCC is 1.6 W/Kg.
The highest reported SAR value for this device when using against the head is
less than 1.6 W/Kg, for usage near the body-worn is less than 1.6 W/Kg(1g-
10mm).
Body worn operation
SAR compliance for body-worn operation is based on a separation distance of 10
mm between the unit and the human body. Carry this device at least 10 mm away
from your body to ensure RF exposure level compliant or lower to the reported
level. Ensure that the device accessories, such as a device case and device
holster, are not composed of metal components. Keep the device away from your
body to meet the distance requirement.
Hardware and software
The certified hardware version of your phone is
NX709S _V1AMB.
The certified software version of your phone is
NX709S_UNCommon_V4.01
FCC Caution.
§ 15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Hearing-Aid Compatibility (HAC)
Your phone is compliant with the FCC Hearing Aid Compatibility requirements.
The FCC has adopted HAC rules for digital wireless phones. These rules require certain phones to be tested and rated under the American National Standard Institute (ANSI) C63.19-2011 hearing aid compatibility standards. The ANSI standard for hearing aid compatibility contains two types of ratings:
- M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than mobile devices that are not labelled. M4 is the better/higher of the two ratings.
- T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to work better with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/ higher of the two ratings. (Note not all hearing devices have telecoils in them.)
The tested M-Rating and T-Rating for this device ( FCC ID: 2AHJONX709S) M3 and T3.
WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>