REDMAGIC PA0228 Daofeng 150W GaN Charger User Guide
- June 16, 2024
- REDMAGIC
Table of Contents
REDMAGIC PA0228 Daofeng 150W GaN Charger
Appearance
Product Features
- Use of new serniconductor material (GaN).
- Supports USBA/ze output.
- Supports screen display for real-time charging power and standby mode
- Supports Bluetooth connection. When in standby mode, users can search for the Bluetooth name “Dao Charger 150W” on their phone, or open an app to scan devices and connect them to a charger device, intelligently controlling the charger.
- Provides fast charging for most types of digital devices such as mobile phones and laptops, and also supports ultra-fast charging.
- The product: supports DC port charging and can charge a laptop via the supplied DC to DC cable Be noted that the specifications of DC interface of different laptop brand varies. It is recommended that users know about specifications of DC interfaces of their own laptops when purchasing appropriate DC adaptors. The accessories list contains the specifications commonly used by each brand, which are for reference only.
- This charger has a rated power of 150W. It is not recommended to use a DC interface to charge laptops with a rated power greater than 180W, as it may damage the charger.
- Multiple protective circuits against overcurrent, overvoltage, temperature and etc. are provided for the product
Safety Warning
- Always use supplied cables or cables with correct specification for the charging purpose, otherwise the quick charger or your device may become damaged, resulting in unnecessary losses
- Do not place the quick charger in a wet area or soak it in water
- Do not drop, impact, disassemble or attempt to repair the product on your own
- Do not expose or place this product to a heat source or flammable place
- Do not leave this product in your car, as high temperatures may damage the product.
- Keep the quick charger out of the reach of children to avoid improper use.
- Do not allow any foreign matter to enter into the Type-C port area of the product to avoid a short circuit or damage.
- In the event of any undesirable signs and malfunctions, stop using the product immediately and contact the retailer
WEEE
Electrical and electronic equipment and parts are marked with this symbol must
not be disposed of with normal household wastage, it must be collected and
disposed of separately to protect the environment. Your PA0228 retailer will
advise you of the correct way of disposal in your country.
Product Specifications
- Product Name: Daofeng 150W four port GaN charger
- Product Model: PA0228
- Product Material: Polycarbonate
- Dimensions (Charger): 101 X71X35mm
- Dimensions(Base): 101X10.8X35mm
- Storage temperature: -20°C~70°C
- Operating temperature: 0°C~25°C
- Suitable for: Digital products such as power banks, mobile phones, laptops, tablets, etc.
Product Parameters
- Input: 100-240V~501/60Hz 3A Max USB-C1/USB-C2 Output: 5V -3A 9V – 3A 12V – 3A 15V -3A 20V-5A 28V-5A 140W Max
- PPS: 5-21V – 5A Max
- USB-A Output: 5V. 3A 9V: 3A 12V:- 2.5A 15V 2A 30W Max
- USB-C1+USB-C2 Output: 90W+45W 135W Max
- USB-C1+USB-A1 Output: 100W+30W 130W Max
- USB-C2+USB-A1 Output: SiV 3A 15W Max
- USB-C1+(USB-C2+USB-A1) Output: 100W+15W 115W Max
- DC Output: 20V -7.5A 150W Max
Touch Button
Press and hold: Turn off the screen and the light belt display
Single tap:
- Turn on the light belt and the display when the screen is off
- Switch between the screen display states (charging data/wallpaper) when the screen’s on
How to Use
- Insert the charger’s plug into the socket, and connect the Type-C port to a USB cable for fast charging of electronic devices like laptops, tablets, consoles, mobile phones, wireless headphones and smart wears.
- The charger can be plugged into a base and connected to an AC cable, allowing users to use it on the desktop.
- This charger is compatible with common fast charging protocols, including PD, PPS and QC
Note : During charging, moderate heating will occur, which is normal
Contents of Package
- 150W Four-port Gallium Nitride Charger*1,
- AC Adaptor Cable *1,
- Type-C to Type-C Cable* 1,
- DC Charging Cable*1,
- Velvet Bag *1,
- Instructions*1
Declaration of RoHS 2.0 Compliance
We’ re determined to reduce the impact we have on the environment and take responsibility for the earth we live on. So this document allows us to formally declare that the PA0228, manufactured by Nub’a Technology Co., Ltd., fully complies with the European Parliament’s RoHS (Restriction of Hazardous Substances) 2.0 Directive 2011/65/EU, with respect to all the following substances:
- Lead (Pb)
- Mercury (Hg)
- Cadmium (Cd)
- Hexavalent Chromium (Cr (VI))
- Polybrominated biphenyl (PBB)
- Polybrominated diphenyl ether (PBDE)
- Di(2-ethylhexyl) phthalate(DEHP)
- Dibutyl phthalate (DBP)
- Benzyl butyl phthalate (BBP)
- Disobutyl phthalate(DIBP)
Our compliance is witnessed by written declaration from our suppliers. This confirms that any potential trace contamination levels of the substances listed above are below the maximum level set by EU.
Warranty Provisions
Warranty period: The warranty period commences from the date of purchase. The product and other accessories carry a warranty period according to local regulations and policy. The date on the proof o’ purchase or any other valid voucher will be considered as the date of purchase. For more detailed warranty information, please consult your local dealer or visit Nubia official website: http://www.nubia.com/en/ http://global.redmagic.gg/
Non-Warranty Provisions
The warranty does not cover the products that are handled in any of the
following cases:
- Products malfunctioned or damaged due to misuse, improper use, abuse, negligence, or any improper use not according to the user manual.
- Products repaired, replaced, or altered by any person other than Nubia customer service center.
- Products malfunctioned or damaged due to natural calamity, force majeure, unpredictable accidents and any other factors beyond the control of Nubia Technology Co., Ltd
- Products altered, converted, or exchanged to meet the requirements of local electrical conditions. safety standards and communication systems by any person other than Nubia service center.
- Products with serial numbers or warranty stickers missing, damaged, or altered.
- Products expiring the warranty period specified in Warranty Card.
DC TO DC Converters
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>