CREALITY 902146 Printmill 3D Printer User Manual

: June 4, 2024
: Creality

CREALITY 902146 Printmill 3D Printer

Dear Consumers,
Thank you for choosing our products. For the best experience, please read the instructions before operating the Printer. Our teams will always be ready to render you the best services. Please contact us via the phone number or e-mail address provided atthe end when you encounter any problem with the Printer.
For a better experience in using our product, you can also learn how to use the Printer in the following ways:
View the accompanied instructions and videos in the storage card.
Visit our official website www.creality.com to find relevant software/hardware information, contactdetails and operation and maintenance instructions.

NOTE

Do not use the printer any way other than described herein in order to avoid personal injury or property damage.
Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment.
Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
Before using experimental or exotic filaments, we suggest using standard filaments such as ABS or PLA to calibrate and test the machine.
Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.
Do not touch the nozzle or printing surface during operation as they may be hot. Keep hands away from machine while in use to avoid burns or personal injury.
Do not wear gloves or loose clothing when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns, possible bodily injury, or printer damage.
When cleaning debris from the printer hotend, always use the provided tools. Do not touch the nozzle directly when heated. This can cause personal injury.
Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame, guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface before every print for consistent results.
Children under 10 years of age should not use the printer without supervision.
This machine is equipped with a security protection mechanism. Do not manually move the nozzle and printing platform mechanism manually while booting up, otherwise the device will automatically power off for safety.
Users shall comply with related nation and region’s laws, regulations and ethical codes where the equipment or produced prints by it is used, and users of our product shall not use aforesaid products to print any end-use products,objects,parts or components or any other physical prints that violate the national or regional laws, regulations and ethical codes where herein referred product and produced prints by it is located.

Introduction

X motor
Nozzle kit
Printing platform
Bed leveling nut
Belt tensioning screw
Manual power switch
X axis limit switch
Extruder
Y motor
Material rack and material tube
Knob screen
Knob
Memory card slot and USB socket
Y-axis limit adjustment component
Z axis belt motor
Power cable connection

Parameters

Basic Parameters

Parts List

Accessory tool list

*Tips: the above accessories are for reference only, please refer to the physical accessories!

Install the profile bracket

| Step: Install the profile support 1 and profile support 2 to the bottom of machine with four hexagon flat head screws M5x12 (As shown in the figure above).
---|---

Install X/Y Axis Belt Assembly

Install the Spool Holder

Install the Display

| Step: Lock the display assembly with two M5X8 flat head screws and two M5 T-nuts, as shown in the figure above;
---|---

Cable Connection

| Caution

Select the correct input voltage match your local power. (115/230V)
Damage can occur if voltage is set incorrectly.
Connect the power cord to turn the power switch on

---|---

Leveling

First move the X axis to the contact part between the nozzle and the belt (slightly press the nozzle onto the belt ) .
Push the two limit switches against the X sliding block to lock the limit;
Press back on the screen to get the printer back to the origin; adjust the Y axis end-stop adjusting screw according to the position of the nozzle relative to the belt after back to the origin in order to make sure the nozzle contacting with the belt rightly; then tighten the Y axis end-stop screw, leveling finished:
if there is any seam or over contact between the nozzle and the belt, adjust the leveling nut slightly.

Preheating

| Notes: The UI information is only for reference, the actual UI may be different.
---|---

Preheating

| Notes: The UI information is only for reference, the actual UI may be different.
---|---

**When you wait for the temperature to rise, hang the filament over holder.**

Load Filament

When the current temperature reaches the target temperature, press and hold the spring of the extruder and insert the consumables into the charging detection hole one by one， then insert the consumables into the small hole of the extruder until the nozzle position.

Start Printing

| File names must be Latin letters or numbers, not Chinese characters or other special symbols
---|---
| Notes: For details on the software instructions, please refer to the slicing software manual in the memory card!
---|---

Circuit Wiring

Trouble-shooting

Due to the differences between different machine models, the physical objects and the final images can differ.The final explanation rights shall be reserved by Shenzhen Creality 3D Technology Co., Ltd.

SHENZHEN CREALITY 3D TECHNOLOGY CO.,L TD.
11F & Room 1201, Block 3, JinChengYuan, Tongsheng Community,
Dalang, Longhua District, Shenzhen, China, 518109
Official Website: www.creality.com
Tel: +86 755-8523 4565
E-mail: info@creality.com | cs@creality.com