JAGUAR F43125 Rear Brake Flexible Hose Instructions

JAGUAR F43125 Rear Brake Flexible Hose

REMOVAL

Hint:

• Use the same procedure for the RH and LH sides.
• The procedure listed below is for the LH side.

1. REMOVE REAR WHEEL

2. DRAIN BRAKE FLUID
   NOTICE:
   Wash off brake fluid immediately if it comes in contact with any painted surface.

3. REMOVE THE REAR FLEXIBLE HOSE LH

   • Remove the union bolt, gasket, and rear flexible hose from the rear disc brake cylinder.

   • Disconnect the brake tube from the rear flexible hose with a union nut wrench while holding the rear flexible hose with a wrench.
     NOTICE:
     Do not bend or damage the brake tube.
     Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

   • Remove the clip.

4. REMOVE THE REAR FLEXIBLE HOSE

   • Disconnect each brake tube from the rear flexible hose with a union nut wrench while holding the rear flexible hose with a wrench.
   • Remove the 2 clips.
   • Remove the rear flexible hose.
   • disconnect each brake tube from the rear flexible hose with a union nut wrench while holding the rear flexible hose with a wrench.
   • Remove the 2 clips.
   • Remove the rear flexible hose.

5. REMOVE NO. 5 FLEXIBLE HOSE BRACKET

   • Remove the bolt and bracket from the upper arm bracket.

6. REMOVE NO. 6 FLEXIBLE HOSE BRACKET

   • Remove the bolt and bracket from the rear axle housing.

Portions of materials contained herein have been reprinted under license from Toyota Motor Sales, U.S.A., Inc., License Agreement TMS1004

References

• MotoLogic
• MotoLogic

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>