JAGUAR JLRDASHCAMR Dash Camera Rear User Manual

JAGUAR JLRDASHCAMR Dash Camera Rear

Key to symbols

• WARNING
  A warning notice informs you of possible risks to your health or life.

• H Environmental note
  Jagular Land Rover has committed itself to comprehensive protection of the environment.
  The objectives are for the natural resources which form the basis of our existence on this planet to be used sparingly and in a manner which takes the requirements of both nature and humanity into account.

Text marked in this way alerts you to the risk of possible material damage or malfunctions.

• Notes marked in this way contain useful tips and additional information.
• These items explain individual operating steps.
• Bullet lists present you with possible selections.

These Operating Instructions are valid for vehicles equipped with a Jagular Land Rover Dashcam. They provide important information and explain how to operate it. The dashcam has been specially developed for use in road traffic and records the traffic situation during a journey.
Before you drive off for the first time, read these Operating Instructions carefully and familiarize yourself with the dashcam. For your own safety and for a longer service life of the device, please follow the instructions and warning notices in these Operating Instructions. Failing to do so may lead to damage to the vehicle and the dashcam as well as personal injury. Jagular Land Rover is continuously updating its dashcam to the state of the art and therefore reserves the right to introduce changes in design, equipment and technical features. For this reason, you cannot base any claims
on the illustrations or descriptions in these

Overview

Safety notes

WARNING
Your attention must always be focused on the traffic conditions. As a driver, do not change settings on the dashcam while driving.
Stop the vehicle safely in accordance with traffic regulations if you wish to make changes to the settings of the dashcam. You may otherwise be distracted by the traffic conditions, cause an accident and injure yourself and others.

WARNING
Have the dashcam installed at a qualified specialist workshop.
Modifications to electronic components, their software or wiring could impair their function and/or the function of other networked components. In particular, systems relevant to safety could also be affected. As a result, these may no longer function properly and/or may jeopardies the operating safety of the vehicle. There is an increased risk of accident and injury. Please observe the relevant instructions in your vehicle Owner’s Manual.
Never tamper with the wiring or electronic components or their software.

In some countries, operation of a dashcam or use of recordings may be restricted or may not permitted at all. Therefore, please find out about the applicable regulations on video surveillance and data protection in the country concerned before using the cameras. Observe the terms of the EU General Data Protection Regulation (EU GDPR). If necessary, you can remove the cameras from the brackets. Stow them safely.

• Do not use the live preview of the app as an aid whilst parking or during the journey.
• Do not connect an electricity supply or end devices to the dashcam via the USB port. Otherwise, the dashcam and/or the connected end device could be damaged.

Safety LED

A white LED on the front and rear camera indicates that a recording is being made. The LED is visible from outside of the vehicle.

• Observe the legal regulations of the country in which you wish to operate the dashcam. In some cases, the white safety LED may not be permissible. Please contact a qualified specialist workshop in such cases. Jagular Land Rover recommends that you use a Jagular Land Rover Service Centre.

Audio recording

In the case of video recordings by the dashcam, depending on the settings which are selected, audio recordings from the vehicle interior may also be made. Switch these off if required; see page 20.

• Observe the legal regulations of the country in which you wish to operate the dashcam. It may be the case that audio recordings are not permissible. Inform vehicle occupants if audio recordings are taking place.
• You must switch off audio recording before you hand the vehicle over to another person.

General notes

• Different sources of radiation, e.g. mobile phones, may interfere with the dashcam.
  Keep the number of sources of radiation in the vehicle as low as possible.

• If the dashcam and/or the vehicle interior become very hot or in extremely cold conditions, the dashcam is switched off in order to protect the components.

Scope of delivery

1. Front camera
2. Rear camera (optional; can only be operated in conjunction with the front camera)

• In as far as the rear camera is not included in your scope of delivery, you can purchase this from your Jagular Land Rover Service Centre at a later date.
• Have the rear camera retrofitted at a qualified specialist workshop.
  Jagular Land Rover recommends that you use a Jagular Land Rover Service Centre for this purpose.

Details

1. Button for unlocking and removing
2. The camera from the bracket
3. MicroSD card slot
4. Speaker
5. On/off
6. Event recording
7. Wi-Fi Reset : On/Off + Event Recording Microphone
8. Radar sensor system
9. Safety LED
10. Camera lens

Preparing the Cameras

Accessories

MicroSD card
A microSD card is essential to operating the dashcam. This can be obtained from a Jagular Land Rover Service Centre or specialist store.

• Jagular Land Rover recommends that you
  use a Jagular Land Rover microSD card.

Technical requirements:

• Storage capacity: 16 to 128 GB
• Speed rating: at least 10
• Write cycles: at least 10.000

Wi-Fi-capable end device

Dashcam settings are made a smartphone app; see page 24. You require a Wi-Fi- capable end device in order to be able to use this app.

• The apps also provide further additional functions.

Technical requirements:

• Wi-Fi standard in accordance with IEEE 802.11 b/g/n/ac
• Support for WPA2 encoding
• Apple ® iOS or Android™ operating system 1
• 1 Pre-requisite for the use of the smartphone app „Jagular Land Rover Dashcam“

Removing/installing the camera

WARNING
Check that the cameras are securely attached before every journey. Re-install the cameras again if necessary. Do not use damaged cameras.
Incorrectly installed or damaged cameras can, for example, come loose in the event of hard braking or acceleration, a sudden change of direction or an accident and be thrown around, thereby injuring vehicle occupants.

• Once removed, store the camera in a clean location and secure it against being thrown around.
  To remove: Press button (3) and remove the camera from the bracket in the

Inserting/removing the microSD card

DANGER
microSD cards are small parts. They can be swallowed and cause asphyxiation. This poses a risk of serious or even fatal injury. Store microSD cards where children cannot reach them. If a microSD card is swallowed, seek medical attention immediately.

Inserting a microSD card

• Remove the front camera from the bracket; see page 18.

• X Insert the microSD card in to microSD card slot (4) as illustrated until the microSD card engages.

• The microSD card may first have to be formatted before it can be used with the dashcam. In such a case, the status LED lights up red; see page 20.

Removing a microSD card

• After removing the front camera, wait approximately 5 seconds so that the data can be stored on the microSD card.
• Remove the front camera from the bracket; see page 18.
• Press the microSD card.
• The microSD card is ejected.
• Remove the microSD card.

Control buttons for the front camera

On/off

Function

• Press briefly : switches the audio recording in the vehicle interior on/off
  Note: The selected setting will be retained the next time the engine is started.

• Press for longer than 3 seconds :
  Switches the dashcam on/off Note: the dashcam is switched on automatically when the ignition is switched on.

Event

• Press briefly : triggers the event video

• Press for longer than 3 seconds : triggers an event photo

• Pressing and holding all t2 buttons simultaneously (> 3 seconds) until a signal tone can be heard : formats the microSD card
  Note: save all the data from your microSD card before formatting in order to prevent data loss!

• Pressing and holding both buttons simultaneously (> 6 seconds) until a signal tone can be heard : resets the dashcam to factory settings

Status LED

Green (lights up) : dashcam is switched on;

• Recording is active (including audio recording) Orange (lights up): dashcam is switched on; recording is active (without audio recording).

• Green (flashing)/orange (flashing): recording has been temporarily interrupted due to a present configuration of the web app/smartphone app.

• Red (lights up): microSD card requires formatting.

• Red (flashing): error state.
  Note: make sure that a suitable microSD card is installed in the dashcam. If the system continues to show an error, please contact a Jagular Land Rover Service Centre to have the error resolved.

• Orange (flashing):  recording of an event video is active.

• Green(lights up): Wi-Fi end device connected.

Deleting recordings

• Save event recordings at regular intervals, particularly after an accident, parking bump or similar.

All recordings are saved on the microSD card in specifically designated areas; see page 25. A difference is made between driving and parked mode and between automatic recordings and event recordings. As soon as the relevant storage area is full, the oldest recording is overwritten by the most recent recording. To manually delete recordings, the microSD card must be formatted; see page 20. In doing so, all storage areas on the microSD card will be deleted.

Driving mode

Recordings in infinite loop

As soon as the vehicle’s ignition is switched on, the dashcam starts the video recording (front and rear camera) and the audio recording in the vehicle interior. Furthermore, depending on the setting, the following data are recorded and saved using the sensor system installed in the dashcam:

• Speed/acceleration
• Date/time
• Location

The settings can be made in the web app or the smartphone app.

Event recordings

• Automatically triggered event video:
  if the sensor system in the dashcam detects a vibration

• O manually trigger the event video:
  Briefly press the button.

• To manually trigger the event photo:
  press the button for longer than 3 seconds.

Settings

WARNING
Sporty driving (car racing in particular) is only permitted on circuits intended for this purpose.
You could otherwise endanger yourself or other road users.

• Connect the end device with the dashcam; see page 23.

• Open the web app or the smartphone app; see page 24.

• Open the settings menu.

• Select the setting and confirm:
  Recordings from the front and rear camera in infinite loop and recordings when vibrations are detected.
  Note: if no rear camera is installed, the front camera records at double the frame rate.

• Event recordings by the front and rear camera, only when vibrations are detected.

• Recordings by the front camera for sporty driving (with double the frame rate).
  Note: rear camera and vibration sensor (automatic event recordings) are deactivated. If required, ensure that the setting is set back to its previous state after the sporty driving.

• Manual event recordings are always possible regardless of the selected setting in driving mode.

Parking mode

In order to maintain the vehicle’s functionality and to protect the vehicle battery, radar and video monitoring are initially switched off if necessary. If vibrations are detected, event recordings are continued, however this function may also be switched off at a later point in time in order to ensure the starting ability of your vehicle amongst other things.

Monitoring range of the sensors

If radar and video monitoring are active, the areas (a few meters) in front of and behind the vehicle are monitored. Monitoring of the area to the rear of the vehicle is only possible if the rear camera is installed.

Recordings when movement is detected

If a vehicle is parked and the ignition switched off, the cameras only record if the radar or video monitoring detects movement in the area around the vehicle.
In such cases, the dashcam records video footage (front and rear camera). Furthermore, depending on the setting, the following data are recorded and saved using the sensor system installed in the dashcam:

• Speed/acceleration
• Date/time
• Location
  The settings can be made in the web app or the smartphone app.

With the help of the radar and video monitoring, the cameras are in a position to start recording even before an incident actually occurs.

Event recordings

• Automatically triggered event video:
  if the sensor system in the dashcam detects a vibration

Settings

Vehicles with infrared glazing/heated windscreen:
activate the video monitoring for monitoring the vehicle when parked. Radar monitoring is not possible due to the characteristics of the vehicle’s glazing.

If the vehicle battery charge level is low, it is recommended to deactivate parked vehicle monitoring.

• Connect the end device with the dashcam; see page 23.
• Open the web app or the smartphone app; see page 24.
• Open the settings menu.
• Select the setting and confirm:
• Radar monitoring and recordings when movement is detected and recordings by the front and rear camera when vibrations are detected
• Video monitoring and recordings when movement is detected and recordings by the front and rear camera when vibrations are detected (duration of monitoring extremely curtailed)
• Event recordings by the front and rear camera, only when vibrations are detected (longest period of monitoring)
• Parked vehicle monitoring deactivated

Establishing a Wi-Fi connection between an end device

Establishing a Wi-Fi connection between an end device and the dashcam

If you wish to use the functionality of the web app or the smartphone app, you must first authorize a Wi-Fi-compatible end device on the dashcam.

• Only one end device can be connected to the dashcam. It is not possible to connect several end devices with the dashcam simultaneously.

Encrypting Wi-Fi (initial installation)

• During initial installation, the Wi-Fi frequency of the dashcam is changed to 5 GHz (except for Japan). If no Wi-Fi connection to the end device can be established, the Wi-Fi can, if necessary, be changed back to 2.4 GHz as not all end devices support 5 GHz. This change is made by resetting the dashcam to factory settings; see page 20.
• If the Wi-Fi password is lost, the dashcam must be reset to factory settings (see page 20) and initial installation must be carried out again.
• During initial installation, the operating language for the web app must be selected. The selected language is then adopted for the spoken messages issued by the dashcam. In order to change the operating language, the dashcam must be reset to the factory settings (see page 20) and the initial installation must be carried out again.
• Switch on the vehicle’s ignition.
• Press the button.
• Switch on the Wi-Fi on the end device and search for available Wi-Fi devices; see the operating instructions for the relevant end device.
  A list of available Wi-Fi devices appears.

Wi-Fi Reset : On/Off + Event Recording

• JLR Dashcam XXXXXX“ should be selected from the list.
  An unsecured Wi-Fi connection between the dashcam and the end device is established.

• In the Internet browser on the end device, open the http://dash.cam page.
  The Wi-Fi password is shown.

• Take note of/copy the Wi-Fi password shown and determine the system language before confirming.
  The dashcam is restarted.

Authorizing an end device and connecting to the dashcam

First carry out the initial installation; see page 23.

• Switch on the vehicle’s ignition.

• Press the WIFI button.

• Search for available Wi-Fi devices on the end device.
  A list of available Wi-Fi devices appears. X „JLR Dashcam XXXXXX“ should be selected from the list.

• Enter the Wi-Fi password and confirm.

A secured Wi-Fi connection between the dashcam and the end device is established.

For the duration of an active Wi-Fi connection between the end device and the dashcam, an Internet connection may not be available on the end device. Depending on the end device, the mobile data connection may also be deactivated. If necessary, switch off Wi-Fi on the dashcam; see page 20.

Activating/deactivating spoken messages

• Safety and function-relevant spoken messages, e.g. that no microSD card is inserted, cannot be deactivated.

Web app

• Connect the end device with the dashcam; see page 23.
• Open the web app or the smartphone app; see page 24.
• Open the settings menu.
• To deactivate spoken messages : select the lowest volume.
• To activate spoken messages : select a volume.

Web app

• Connect the end device with the dashcam; see page 23.
• In the Internet browser on the end device,
  open the http://dash.cam page.

Smartphone app „Jagular Land Rover Dashcam“

To use the free smartphone app, it must first be installed on your Wi-Fi- enabled end device.

Downloading may incur additional costs depending on your mobile phone contract. For more detailed information contact your mobile network provider.

• Open Apple ® App Store or Google Play™ 1 on the end device.
• Search for the „Jagular Land Rover Dashcam“ smartphone app and install it on the end device.
• Connect the end device with the dashcam; see page 23.
• Open the „Jagular Land Rover Dashcam“smartphone app.

Playing back recordings

Various options are available for the playback:
It is possible to play back recordings on an end device 2 and via the web app or the smartphone app.

1. Google Play is a trademark of Google Inc.
2. An adapter may be required in order that the microSD card can be inserted into an end device.

Playback on an end device

For playback, you need a player which can play two video streams simultaneously.

• Remove the microSD card from the dashcam; see page 19
• Insert the microSD card into the end device 2 ; see the operating instructions of the relevant end device.
• Select the microSD card and start playback.

Data protection

Data is not shared automatically. For the purpose of protecting your data, pay attention to who has access to the microSD card and authorized end devices.

Technical Data

Resolution| Front: Full HD (1920×1080)
Rear: Full HD (1920×1080)
---|---
Framerate| 30fps (mode with front and rear camera)
60fps (mode for sporty driving/mode without rear camera)
Aperture angle| Front: 131°(diagonal), 108°(horizontal), 69°(vertical)
Rear: 153°(diagonal), 125°(horizontal), 65°(vertical)
Container| MPEG-4
Video codec| MPEG-4AVC(H.264)
Audio codec| MPEG-4AAC
Video length| Driving mode: 150MB corresponds to approx. 1 minute
Parked mode: 50MB corresponds to approx. 20 seconds

Length of the recording in the respective storage area

Size of microSD card| Driving mode (recording sin infinite loop)| Driving mode (event recordings)| Parked mode (recordings when movement is detected)| Parked mode (event recordings)
---|---|---|---|---
32GB| approx. 132 minutes| approx. 44 minutes| approx. 22 minutes| approx. 11 minutes
64GB| approx. 264 minutes| approx. 88 minutes| approx. 44 minutes| approx. 22 minutes

Monitoring times (parked mode)

Radar monitoring + event recordings in the event of vibrations| Video monitoring + event recordings in the event of vibrations| Event recordings in the Event of vibrations
---|---|---
^Radar monitoring up to 12hours
^After radar monitoring has been automatically deactivated up to 24 hours event recordings in the event of vibrations| ^Video monitoring up to ½ hour
^After video monitoring has been automatically deactivated, event recordings in the event of vibrations for up to 24 hours| Up to 6 days of event recordings in the event of vibrations

• The monitoring time is shortened with every recording made.
• Notes on successive deactivation of monitoring; see page 22.

RF Specification

WiFi
2.4GHz band (Only Front Model)

Supported Protocol and Standard:
IEEE 802.11n,
Frequency Range : 2412MHz ~ 2462MHz

Amount of Working channel: 1, 6, 11
Channel Bandwidth : 20MHz
Modulation: OFDM

5 GHz band (Only Front Model)
Supported Protocol and Standard: IEEE 802.11ac,
Frequency Range: 5775MHz
Amount of Working channel: 155
Channel Bandwidth : 80MHz
Modulation : OFDM

Radar
Frequency Range: 24050~24250 MHz
Modulation: FMCW

General
Power Supply: DC 12V
Temperature Range: -40℃ ~ 85℃.

Key to Symbols

WARNING
A warning notice informs you of possible risks to your health or life.

Environmental Note
Jagular Land Rover AG has committed itself to comprehensive protection of the environment.
The objectives are for the natural resources which form the basis of our existence on this planet to be used sparingly and in a manner which takes the requirements of both nature and humanity into account.

Text marked in this way alerts you to the risk of possible material damage or malfunctions.

• Notes marked in this way contain useful tips and additional information.
• These items explain individual operating steps.
• Bullet lists present you with possible selections.

Congratulations on your new Jagular Land Rover Dashcam.

These Operating Instructions are valid for vehicles equipped with a Jagular Land Rover Dashcam. They provide important information and explain how to operate it. The dashcam has been specially developed for use in road traffic and records the traffic situation during a journey.
Before you drive off for the first time, read these Operating Instructions carefully and familiarize yourself with the dashcam. For your own safety and for a longer service life of the device, please follow the instructions and warning notices in these Operating Instructions. Failing to do so may lead to damage to the vehicle and the dashcam as well as personal injury. Jagular Land Rover is continuously updating its dashcam to the state of the art and therefore reserves the right to introduce changes in design, equipment and technical features. For this reason, you cannot base any claims on the illustrations or descriptions in these

Declarations of Conformity

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION : Any Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times.

CANADA

• HVIN : Jaguar Dash Cam Front / Land Rover Dash Cam Front
• IC : 22539-JLRDASHCAM
• HVIN: Jaguar Dash Cam Rear / Land Rover Dash Cam Rear
• IC : 22539-JLRDASHCAMR

IC Warning Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement
This equipment complies with IC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Additional information of LEDs and buttons for the test LAB.

12VDC 0.5A
Manufactured by : Mobile Appliance Inc. / 401 Simin Daero, Dongan- Gu, Anyang- Si, Gyeonggi-Do Korea Manufacture Date : 12-2016 Country of Origin : South Korea

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>