HAAN Slim SI-38 Sanitizing Steam Cleaner User Manual
- June 13, 2024
- HAAN
Table of Contents
HAAN Slim SI-38 Sanitizing Steam Cleaner
Product Information
- Name: Slim
- Model Number: SI-38
- Manufacturer: HAAN Corporation
- Address: 1828 William Penn Way Lancaster, PA 17601
- Phone: 877-422-6347
- Website: www.HAANusa.com
Introduction
The Slim SI-38 is a sanitizing steam cleaner designed for solid surfaces
and carpeting.
Important Safety Instructions
- Risk of electrical shock: Be sure to read and follow all instructions and warnings.
- For household use only. Any other use of this appliance will void the manufacturer’s warranty.
- Do not direct steam at people, animals, or electrical outlets.
- Do not be exposed to rain.
- Store indoors.
- Unplug from the outlet when not in use and before conducting service maintenance or troubleshooting.
- Do not leave the steam cleaner unattended.
- Do not leave the steam cleaner connected to an electrical outlet when not in use.
- Do not service the steam cleaner when it is plugged in.
- Do not use a damaged cord or plug.
- Do not use steam cleaner if it has been dropped, damaged, left outdoors, or dropped into water. Return to a service center.
- Do not handle steam cleaner with wet hands.
- Do not pull or carry by cord, use the cord as a handle, close the door on the cord, pull the cord around sharp corners, or expose the cord to heated surfaces.
- Do not unplug by pulling on the cord.
- Do not use appliances in an enclosed space filled with vapor given off by oil-based paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
- Do not allow it to be used as a toy.
- Do not use on leather, wax-polished furniture or floors, synthetic fabrics, velvet, or other delicate, steam-sensitive materials.
- Do not immerse in water or any other liquid.
- Do not use it for any purpose other than described in this User Manual.
- Use only the manufacturer’s recommended electric shock or injury.
- Never put descaling, aromatic, alcoholic, or detergent products into the steam cleaner, as this may damage it or make it unsafe for use.
- Unplug by grasping the plug, not the cord.
- Close attention is necessary when used by or near children.
- If the circuit breaker activates while using the steam function, discontinue product use immediately and contact the customer support center. (Beware of the risk of electrical shock.)
- Do not allow the product to be disassembled and/or modified by anyone other than an authorized service technician. (Doing so can result in fire and/or electrical shock.)
- This product is NOT for space heating purposes.
Electrical Plug Instructions
WARNING
DO NOT modify the plug. Improper connection can result in a risk of
electrical shock.
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
Introduction
Congratulations on purchasing a HAAN® product. Now you have an easy way to clean your tile, hardwood, laminate, linoleum, and vinyl floors.
Your steam cleaner uses steam to remove tough grease, dirt, and grime. Steam is nature’s purest and most powerful cleaner for safely cleaning all hard surfaces in your home without harsh chemicals, for a perfectly ecological approach. No film, no residue – just clean, germ-free floors. HAAN® products are so easy to assemble, that you can put them to use right away – anywhere you want to clean and sanitize – from your kitchen and living room to your bathroom floors. Backed with a one-year limited warranty, your quality HAAN® product is sure to give you years of dependability. Our Customer Care representatives are available to answer any of your questions about your new floor sanitizer. Thousands of HAAN® customers have already fallen in love with HAAN® Steam Cleaners. We’re confident you will, too. Thank you again for purchasing the HAAN® Slim Steam Cleaner.
The HAAN® Team
Important Safety Instructions
IMPORTANT: Be sure to read ALL instructions and warnings before using your HAAN® Steam Cleaner.
WARNING: Risk of electrical shock: Be sure to read and follow all instructions and warnings.
CAUTION: The unit emits steam at 212˚F to sanitize the area of use. This means that the steam head, Ultra-Microfiber Pads, and Carpet Glide get very hot during use. Care should be taken when using this appliance. DO NOT touch them during use except in the approved manner as outlined in this manual.
SAVE THESE INSTRUCTIONS:
For household use only. Any other use of this appliance will void the
manufacturer’s warranty.
Basic precautions should be observed when using an electrical appliance, including the following:
- Do not direct steam at people, animals, or electrical outlets.
- Do not be exposed to rain.
- Store indoors.
- Unplug from the outlet when not in use and before conducting service maintenance or troubleshooting.
- Do not leave the steam cleaner unattended.
- Do not leave the steam cleaner connected to an electrical outlet when not in use.
- Do not service the steam cleaner when it is plugged in.
- Do not use a damaged cord or plug.
- Do not use steam cleaner if it has been dropped, damaged, left outdoors, or dropped into water. Return to a service center.
- Do not handle steam cleaner with wet hands.
- Do not pull or carry by cord, use the cord as a handle, close the door on the cord, pull the cord around sharp corners, or expose the cord to heated surfaces.
- Do not unplug by pulling on the cord.
- Do not use appliances in an enclosed space filled with vapor given off by oil-based paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
- Do not allow it to be used as a toy.
- Do not use on leather, wax-polished furniture or floors, synthetic fabrics, velvet, or other delicate, steam-sensitive materials.
- Do not immerse in water or any other liquid.
- Do not use it for any purpose other than described in this User Manual.
- Use only manufacturer’s recommended attachments – use of attachments not provided or sold by HAAN® may cause fire, electric shock, or injury.
- Never put descaling, aromatic, alcoholic, or detergent products into the steam cleaner, as this may damage it or make it unsafe for use.
- Unplug by grasping the plug, not the cord.
- Close attention is necessary when used by or near children.
- If the circuit breaker activates while using the steam function, discontinue product use immediately and contact the customer support center. (Beware of the risk of electrical shock.)
- Do not allow the product to be disassembled and/or modified by anyone other than an authorized service technician. (Doing so can result in fire and/ or electrical shock.)
- This product is NOT for space heating purposes.
IMPORTANT
WARNING: DO NOT modify the plug. Improper connection can result in a risk of electrical shock.
Electrical Plug Instructions:
This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, this plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to defeat this safety
feature.
Operating Instructions
IMPORTANT: Always ensure that your steam cleaner is UNPLUGGED from the wall receptacle before cleaning or emptying the water tank.
CAUTION: Do not immerse your steam cleaner in water or any other liquid.
CAUTION: Always operate floor sanitizer by gripping the handle. Do not grip the pole.
Care & Maintenance
- Turn your steam cleaner off and unplug from the electrical outlet.
- Wrap the power cord around the cord hangers.
- Let your steam cleaner cool for five (5) minutes before removing the Ultra-Microfiber Pad and before emptying the water tank.
- Always empty the water tank when you have finished using your steam cleaner.
- Never leave the Ultra-Microfiber Pad on steam cleaner when you have finished using it. Always remove the Ultra-Microfiber Pad and wash in warm water with a mild detergent. Never use bleach or fabric softener when cleaning the Ultra-Microfiber Pad. The Ultra-Microfiber Pad can be washed in a washing machine and dried in a clothes dryer but on low heat. To decrease pad wear, we recommend the pad be hung to dry for 24 hours.
- Wipe your steam cleaner with a damp cloth to clean. Never immerse the unit in water or any other liquid.
- To keep your steam cleaner in good condition, we recommend that you clean the water tank once a month to eliminate calcium deposits. Add eight ounces (8 oz) of water to the water tank and insert 1 packet of Fresh Rinse™ Lime and Scale Remover. Shake to loosen any deposits. Place the unit on the resting mat without a pad, turn the unit on, and allow water to steam until the water in the tank is depleted. Do not use vinegar or other decalcifying substances in the steam cleaner water tank.
Helpful Hints
- Always use a vacuum or sweep before sanitizing your floors.
- The easiest way to use the machine is to tilt the handle to a 45º angle and clean slowly 2-3 yards at a time.
- A good amount of steam passes through the Ultra-Microfiber Pad. We recommend that the Ultra-Microfiber Pad be changed when it becomes oversaturated.
- To remove stubborn stains from vinyl or linoleum floors, pre-treat with a mild detergent and some water before using the steam cleaner.
Ultra-Microfiber Pads for HAAN® Steam Cleaners
What is an Ultra-Microfiber?
An Ultra-Microfiber is a textile fiber that is thinner and more absorbent than
a micro-fiber (1.0dtex) pad typically used with steam mops. Specifically, to
be defined as an Ultra-Microfiber, it should be less than 0.2dtex. The Ultra-
Microfiber Pad by HAAN Corporation is made of .17dtex Ultra-Microfibers.
How to Use Ultra-Microfiber Pads
- Please make sure that a completely dry pad is used.
- As high-temperature steam passes through a pad to contact the floor to kill germs, molds, and mites and to provide a certain amount of water necessary for cleaning, it is natural that the pad gradually absorbs moisture. After a certain length of time, the pad repels water and becomes damp.
- To keep the floor clean and dry, replace the pad when it is dirty.
- Only remove the pad from the unit when not in use and steam is not being emitted.
How to Clean and Store
- Hand wash or machine wash the Ultra-Microfiber Pad in cold water on the delicate cycle with a mild detergent. (Do not use a fabric softener)
- Using a washing machine may shorten the lifespan of the pads.
- We recommend air drying the Ultra-Microfiber Pad for 24 hours, but they could be dried in a dryer on a low heat setting.
Product Assembly & Parts
- Handle
- Pole
- Power Indicator Light
- Steam Power Switch
- Storage Hook (rotates 360º)
- Power Cord Organizer (bottom)
- Power Cord
- Water Tank Release Button
- Detachable Water Tank
- Fresh Rinse™ Lime & Scale Remover
- Floor Protector / Resting Mat
- Carpet Glide
- Ultra-Microfiber Pads (x4)
Helpful Hint:
To extend the life of your Ultra-Microfiber Pads, always place your unit on
the floor protector/resting mat while the unit heats up. Attach the Ultra-
Micro-fiber Pad when the unit is ready to use.
Helpful Hint:
When using the steam cleaner with the Carpet Glide it will not lift all set-in
stains from your carpet. Our patented Ultra-Mi-microfiber Pad may be used to
act as a “blotter” for removing most fresh, wet spills and stains.
Before Using Your Steam Cleaner
Be sure to read ALL instructions and warnings before using your steam
cleaner.
WARNING: Your steam cleaner is designed to clean hard floor surfaces that will withstand high heat. Do not use it on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with wax or some no-wax floors, the sheen may be removed by the heat and steam action. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We also recommend that you check the use and care instructions from the floor manufacturer.
Helpful Hint:
When heated, never leave the appliance in one spot on any surface for any
period. Always place your steam cleaner on the Floor Protector/Resting Mat
when stationary.
Helpful Hint:
Always empty water from the water tank after use. To ensure optimum product
function use Fresh Rinse™ once a month.
CAUTION: Use only a heavy-duty extension cord rated for 15 amps minimum – DO NOT use an ordinary extension cord.
IMPORTANT : This product is NOT for space heating purposes.
CAUTION: HAAN® floor care products products emit steam at 212º to sanitize the area of use. This means that the steam head, Ultra-Microfiber Pads, and carpet glide get very hot during use. Care should be taken when using this appliance and DO NOT touch components of this machine during use except in the approved manner as outlined in this manual.
Using Your Steam Cleaner
Operating Instructions
- Assemble the unit and place it on the Floor Protector / Resting Mat.
- Press the Water Tank Release button and remove the water tank.
- Turn the Cap counterclockwise to remove. Fill the tank with water.
- Tighten cap. Insert tank (cap down) until it “clicks”.
- Press the steam power switch button. Wait 20 seconds for the unit to heat up. The unit may vibrate while heating.
- Gently place the unit on the Ultra-Mi-crofiber Pad. You are now ready to steam clean.
- Tilt the handle at a 45º angle. Push and pull slowly across the floor to clean thoroughly.
- When done, push the steam power switch.
- Place unit with Ultra-Microfi-ber Pad attached to Floor Protector / Resting Mat. Allow to cool down for five (5) min.
- When the unit has cooled, remove the Ultra-Microfiber Pad and water tank. Store the unit upright in a dry area.
IMPORTANT : Vibration Sound
During use, it’s normal to hear a “clicking” sound coming from the unit. This
sound is produced by the water being pumped through the unit
IMPORTANT: Always empty the water tank once you have finished using your steam cleaner.
Using the Carpet Glide
What is the Carpet Glide?
The carpet glide enables the steam cleaner to freshen, deodorize, and sanitize
carpeting, rugs, upholstery, pet cushions, and more. Used with the steam
cleaner it kills dust mites and other allergens on a variety of surfaces.
NOTE : The Carpet Glide is used WITHOUT the Ultra-Microfiber Pad.
- Attach carpet glide by placing the unit under “tabs” and gently pushing it down into place.
- With carpet glide attached, place on Floor Protector / Resting Mat. Follow operating instructions to clean.
- Turn the unit off, unplug it, and let it cool. Use your foot on the “Hands-Free” tab to remove the carpet glide from the steam head.
Using the Carpet Glide
FOR FRESH STAINS
- Place the unit on the stain. Let stand for a few seconds. Allow the steam to saturate the stain.
- Slowly move the unit back and forth over the stain.
- Remove carpet glide from the unit with a hands-free tab.
- Gently place the unit on the Ultra-Micro-fiber Pad.
- Use the pad to rub the area “blotting” out the stain.
- Turn the unit OFF. When cooled, remove the Ultra-Microfiber Pad.
Troubleshooting
Problem Solution
The unit not operating.
| • Ensure the plug is set firmly in the outlet.
• Replace fuse or reset breaker.
The unit does not emit steam.| • Ensure the water tank is filled with water.
Water is left on the floor.
| • Change the Ultra-Microfiber Pad.
• Ensure the unit is always level and parallel to the floor.
White spot left on the floor.| • When cleaning do not leave the unit in one spot for too long.
• Use a protector pad/floor mat when the unit is ON and stationary.
• Use distilled water instead of hard tap water.
NOTE: To remove the spot, use a damp cloth with a few drops of white vinegar to rub and remove the stain.
Commonly Asked Questions
Q: Can the HAAN® Steam Cleaner be used on laminate flooring?
A : Yes. Your steam cleaner was designed to be gentle on delicate
flooring, yet powerful enough to penetrate stains and kill harmful germs and
bacteria. It is recommended that the flooring manufacturer be contacted to see
if it is OK to clean the floor with steam. Leaving the steam mop sitting in
one spot while steaming could result in discoloration of the flooring.
Q: How long can an Ultra-Microfiber Pad be used until it needs to be
changed?
A : The pad should be changed every 10 minutes, or when it becomes
saturated with water. The unit will become harder to push with an overly wet
pad.
Q: How long does a tank of water last?
A : A full tank will last approximately 20-25 minutes.
Q: Sometimes my steam cleaner becomes hard to push – why?
A : If the unit is hard to push it’s likely because the Ultra-Microfiber
Pad is too wet or the angle at which you are using the machine is too high.
Q: How do you use the Carpet Glide for my carpet?
A : The carpet glide is to be used without the Ultra-Microfiber Pad and
can be attached directly to the unit.
Q: Does the HAAN® work on pet stains?
A : Yes, the HAAN® can spot clean fresh pet stains by loosening and
lifting the stain.
Q: How can I prolong the life of my HAAN®?
A : To maintain the life of your unit, we recommend using the Fresh
Rinse™ once a month.
Q: Will the HAAN® Steam Cleaner clean the grout?
A : Yes, but it needs a little help. If you glide your HAAN® over the
problem areas and then scrub with your Ultra-Microfiber Pad, it should
effectively clean your grout. However, it will not remove discoloration as
this has been absorbed into the grout.
Couldn’t find the Answer to your Question.
Call Customer Care at 877-HAAN DIRECT /
877-422-6347
To order additional pads, accessories or replacement parts call customer care at: 877-HAAN DIRECT / 877-422-6347 Or visit : www.HAANusa.com
Product Specifications: Model SI-38
Color| Red
Size| 11.75” W x 6.94” D x 46.5” H
Weight| 5.5 lb
Voltage/Hz| AC 120V, 60Hz
Wattage| 1200 watts
Cord Length| 19.5 Feet
Tank Capacity| 13.5 oz.
Heat-up Time| 20 sec.
Operating Time| Up to 25 min.
*Dimensions approximated. Dimensions include base and measured without hose, or attachments.
One-Year Limited Warranty
**** Your HAAN® Steamer is warranted to be free from defects in material and workmanship for one (1) year from the date of purchase when utilized for normal household use by the original purchaser only. The included Warranty Registration Card should be filled out and returned within thirty (30) days of purchase. This will register your product.
Should any defect covered by the terms of the limited warranty be discovered within one year, HAAN Corporation will repair or replace the defective part. To process a warranty claim, contact customer care at 1-877-422-6347 for further assistance and instructions. A customer care agent will conduct troubleshooting in an attempt to fix any minor problems. Should troubleshooting not provide any result, a return authorization will be issued. Proof of purchase is required and should accompany the return. Freight costs must be prepaid by the purchaser.
The liability under this warranty is limited solely to the cost of the replacement parts or the complete unit at our option. Labor charges are not included.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or conventional warranties. The responsibility of HAAN Corporation, if any, is limited to the specific obligations expressly assumed by it under the terms of the limited warranty. In no event is HAAN Corporation liable for incidental or consequential damages of any nature whatsoever. Some states/provinces do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you. This warranty gives you specific legal rights which vary from state to state or province to province.
Warranty Notice: failure to complete and return the product registration card will not diminish your warranty rights.
Product Registration
Please fill out and mail this Product Registration Card within thirty (30) days of purchase to validate the aforementioned Limited Warranty. The registration will allow us to contact you in the unlikely event of a product safety notification. By returning this card you acknowledge that you have read and understood the instructions for use and the warnings set forth within the instructions.
- First Name
- Last Name
- Address
- City
- State/Province
- Zip Code/Postal Code
- Country/Territory
- Product Name/Model number
- Date Purchased
- Place of Purchase
Warranty Notice: FAILURE TO COMPLETE AND RETURN THIS PRODUCT REGISTRATION CARD WILL NOT DIMINISH YOUR WARRANTY RIGHTS.
Privacy Notice : and the HAAN privacy policy. For information on this policy contact 877- HAAN DIRECT.
- Yes! I would like HAAN® to send me information on products and services including new product releases, events, and special offers. You may contact me by:
- PHONE
- What other HAAN® products have you purchased?
- Where did you purchase your HAAN® product?
- How did you hear about HAAN®?
- We like to hear from our product owners.
Please add any comments here:
Product Registration HAAN® Corporation 1828 William Penn Way Lancaster, PA 17601
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>