alza WT410 Thermostat User Manual

: June 5, 2024
: alza

Table of Contents

alza WT410 Thermostat
Product Usage Instructions
Maintenance
FAQ
Application
Product packaging
Electrical Specifications
User Instructions
Wiring Diagram
Mounting steps
Icon Description
About WIFI connection
Warranty Conditions
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

alza WT410 Thermostat

alza-WT410-Thermostat-PRODUCT

Product Usage Instructions

Ensure the power source is turned off before installation.
Mount the thermostat host securely in the desired location.
Connect the appropriate sensors based on your heating system.
Refer to the guide/manual for detailed installation steps.
Access the mobile phone app or use the thermostat controls to adjust the temperature setting.
You can also adjust the brightness of the display screen using the mobile app.

Maintenance

Regularly check the sensors and connections for any signs of damage or wear.
Clean the thermostat as needed with a soft, dry cloth.

FAQ

Q: How do I switch between different heating modes?
A: Use the selector switch on the thermostat to choose between water heating, electric heating, or gas boiler modes.
Q: Can I adjust the temperature remotely?
A: Yes, you can adjust the temperature settings through the mobile phone app that accompanies the thermostat.

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

This thermostat is used for water heating electric heating, or gas boiler.
Welcome

Thank you for your trust and support.
We have adopted advanced technology and perfect craftsmanship so that your new thermostat will provide you with a suitable temperature environment every day in the future. It makes your life more pleasant and artistic and makes your living environment more fashionable aesthetic.
For detailed instructions on the installation using this thermostat, please read this manual carefully.
Please get in touch with a professional to install the thermostat for you. Besides, please install and use this product within the scope of the law.

Application

The intelligent digital temperature controller is a floor heating system suitable for room temperature control and household temperature control. It controls the operating status of the floor heating equipment by sensing the comparison between the ambient temperature and the set temperature. While improving comfort, it achieves the purpose of energy saving.
This digital thermostat adopts microcomputer control technology has an elegant design and is easy to use. Moreover, it has manual and automatic functions, programmable functions, and state memory functions.

Product packaging

Thermostat host x 1
Certificate of conformity x 2
Guide/manual 1 x
Screw x 1

L: Backlight (You can adjust the brightness through the mobile phone APP or turn off the backlight)
R2: Internal sensor and external sensor on the ground
GA: Water heating 3A
GB: Electric heating 16A
GC: Linkage; M: Gas boiler 3A
GE: for water heating + for gas boiler

Electrical Specifications

Temperature Sensor: NTC
Temperature Accuracy: ±1°C
Display Screen: LCD
Working Environment: -5 – 50°C
Self-consumption power: <1W
Temperatures getting: 5~60°C
Display Range: 0-51°C
Load Current: Water heater 3A (resistive) electric heater 16A (resistive) 02
Voltage: AC100-240V, 50/60Hz

User Instructions

Read this manual carefully. A general operation may damage the product or cause a dangerous situation.
The installation personnel must be well-trained and experienced service technicians.
After the installation is complete, please close this manual carefully and operate this product following the user guide.

Note: There is a risk of electric shock or equipment damage.

Wiring Diagram

alza-WT410-Thermostat-FIG-1

GA: Water heating
GB: Electric heating
GC: Gas boiler heating
GE: For water heating + for gas boiler

Mounting steps

Connect the power box according to the wiring diagram.
Separate the power supply from the control board cable.
Screw the power supply into the box of 86.
Connect the power board to the control board line, and align the buckle at 30 degrees to complete the installation.

Icon Description

alza-WT410-Thermostat-FIG-6

Operation Guide

Power on/off: press the key to turn on/off the thermostat.
Press the key to switch between manual and Away modes.
Simultaneously press and hold the up and down keys for 5 seconds to add or cancel the child lock.
WIFI link: When the thermostat is turned on, press, and hold the up button for five seconds, the WIFI icon flashes on the thermostat display, and the thermostat enters the code-matching state.

Time programming instructions

Options| Icon| Time| Tima

Adjustment

| Defaults| Temperature

adjustment

---|---|---|---|---|---

Working days

| 1| 06:00| ****

| 20°C| ****

2| 08:00| 16°C
3| 11:30| 16°C
4| 12:30| 16°C
5| 17:00| 22°C
6| 22:00| 16°C
Holidays| 1| 08:00| 22°C
2| 23:00| 16°C

Advanced options

In the shutdown state, press the and key. Press for 5 seconds to enter the advanced option setting.
Press the key to enter the next option, then press the up and down key to adjust options and press the key to exit the advanced option setting mode.

1

| Temperature compensation| The default value of the calibration room temperature is –

2°C. Press the up or down key to adjust the range from 9.9° to -9.9°C.

---|---|---

2

| Sensor selection| The temperature sensor selection defaults to IN. Press the up and down keys to adjust it respectively as IN internal sensor selection. ALL means all internal sensors are

selected; OUT means external sensors are set.

3| Limit temperature value modification| The limit temperature value is 60°C. Press the up and down keys to adjust the range from 35°C to 60°C.
4| Temperature difference setting| The default setting temperature difference start is 1°C.

Press the up and down keys to adjust the range to 0.5-10°C.

5| Antifreeze function| Set the antifreeze function as OFF by default; press the up

key to turn on the antifreeze function.

6

| Rest day selection (optional) and closing week programming| 5: Two-day weekend 6: Single day off

7: No rest

OFF: Turn off programming

7

| Main and auxiliary reverse selection (optional)| Set the main and auxiliary reversal to 00 by default. Press

the up and down keys to adjust 00 main reverses, and 01 to indicate auxiliary reversal.

8

| Backlight brightness| 00: Turn off the backlight 01: Micro-light

02: Medium brightness

03: Backlight highlight

---|---|---

9

| Set upper temperature upper

limit

| Set the upper limit of the temperature to 60°C, and press the up or down key to adjust the range from 15°C to 95°C.
10| Sound| ON: Turn on the sound

OFF: Turn off the sound

11

| Windows opening detection| Start – The room temperature drops by 6 degrees within 4 minutes and stop heating.

Close–room temperature rises by 3 degrees Celsius/after 48 minutes/manual (three methods)

After the window opening mode is enabled, any one of

these three conditions can trigger the exit of the window opening mode.

12

| Power outage memory function| 0: Memory function

1: Turn on after turning on the power

2: Turn off after turning on the power

13

| Reset| Set to restore factory settings. The default display is “-,“

Press the up key to display “—,” and then press the enter key to restore the factory settings.

About WIFI connection

Before using the WIFI temperature controller for the first time, you must set the WIFI value number and configuration via your smartphone or tablet, which will allow communication between your connected devices.
WIFI connection: When the thermostat is turned on, press and hold the up button for 5 seconds, the WIFI icon flashes on the thermostat display, and the thermostat enters the code-matching state.
WIFI connection: Bluetooth thermostat, please turn on the phone’s Bluetooth.

APP Download
Search for “Tuya Smart” in each APP market or scan the following QR code to download this software.

Register an account

If you do not have an APP account, you can choose to register or log in via SMS verification code. Click “Create New Account” to enter the privacy policy page of Tuya Smart Platform.
After clicking Agree, you will formally join the registration page of your mobile phone number.
The system automatically determines the current country/region, or you can manually select the country/region, enter your phone number or email address, and click “Get the Verification Code.”
Enter the received verification code. Then enter the password. Click “Finish” to register successfully.

alza-WT410-Thermostat-FIG-12

Add device

(Bluetooth connection) Turn on the mobile phone’s Bluetooth, turn the device on, and enter the Tuya APP. Click “Add Device” o “+” on the top right of the APP homepage, and enter the “Add Device” interface. It will prompt: find the device to be added (Figure 2) and follow the prompts.
“Automatic discovery”: Search for devices (Figure 3), and add widgets as prompted on the phone page.
(WIFI connection) When the thermostat is turned on, press and hold the up button for 5 seconds, the thermostat display will show.
Now the WIFI icon flashes (slow flashing), and the thermostat enters the status of code matching.

Find the temperature control product (Bluetooth +WIFI model) in the (small household appliances). In the specified network configuration, click the confirmation button on the page, select the WIFI that can connect to the Internet in the working area of the device, and enter it.
WIFI password, click Next, click according to the page prompt (Figure 2), “Go to connect”, and follow the instructions to find the prompt content (Figure 3), click “Prompt content” and then return to the Tuya APP to enter the network configuration process.

alza-WT410-Thermostat-FIG-14

In this case, the APP for the network configuration process is shown in Figure 1, and the network configuration successfully displays the interface shown in Figure 2. The device’s name with successful network configuration can be modified, and the room’s location can also be selected.

alza-WT410-Thermostat-FIG-15

If the network configuration fails, the APP will display the page as shown in the figure below, and you can choose to add it again or view the help.
Note: Please confirm whether the thermostat enters the code-matching state if the connection fails.

The Thermostat APP interface display

alza-WT410-Thermostat-FIG-17

Warranty Conditions

A new product was purchased in the Alza. cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptations to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity
This equipment complies with the essential requirements and other relevant provisions of EU directives.

WEEE
This product must not be disposed of as normal household waste under the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines under national regulations.