NEXX X.COM 3 Full Face Helmet Instruction Manual

NEXX X.COM 3 Full Face Helmet

Specifications

• Brand: NEXX
• Model: X.WST3
• Features: FRS – Fast Release System, PINLOCK, ERGO-PADDING

Product Information

NEXX X.WST3 helmets are designed with a focus on providing both protection and style for motorcyclists. The helmets feature innovative technologies such as the FRS – Fast Release System for easy removal and adjustment, PINLOCK for anti-fogging functionality, and ERGO-PADDING for customizable comfort.

Visor and Shield Maintenance:

1. Open the visor all the way up.
2. Push the button on both sides to remove the visor.
3. To reattach the visor, align the visor pins with the mechanism holes and press to secure.

Sunvisor Usage:

1. Open the sunvisor by pulling from both sides.
2. To remove the sunvisor, insert both sides and pull up.

FRS – Fast Release System:

1. Pull the lever and slide the red button to release the earpads.
2. To remove the helmet safely, open the chin strap and pull the emergency strap on both sides.
3. Ensure the earpads are securely attached before use.

ERGO PADDING Maintenance:

The helmet size adjustment is achieved through internal sponges that allow for better fitting based on head shape.

Manual of Instructions

Please read this manual carefully before using the helmet and keep it in a safe place. For safe and correct use, please follow these instructions. The main function of the helmet is to protect the head in case of impact. This helmet is designed to partially absorb the energy of an impact by partially destroying some components of the helmet. Any helmet that has been heavily impacted in an accident or has received an equivalent shock should be replaced even if the damage is not visible. To maintain the full efficiency of the helmet, no modifications should be made to its structure or components without the approval of the homologation authority, as this could reduce the safety of the user. Only homologated accessories should be used.

Description of Components

Ventilation

Top Intake Ventilations

Open

Close

Airflow Circuit

Diagram showing the airflow circuit through the helmet.

Frontal Intake Ventilations

Close

Open

Lateral Intake Ventilations

Close

Open

Chin Intake Ventilations

Open

Close

Chin Wings Deflector

Helmet Stabilizer

Usage Instructions

How to Clean the Visor

To clean the visor without altering its characteristics, use only water and soap (preferably distilled) and a soft cloth. If the helmet is very dirty (e.g., insects), you can add a bit of dishwashing liquid to the water. Remove the visor from the helmet before performing a deeper cleaning. Never use objects to clean the helmet that may damage/scratch the visor. Always store the helmet in a dry, light-protected place, preferably in the bag provided by NEXX HELMETS.

How to Remove the Visor

1. Open the visor all the way up.
2. Push the button on both sides.
3. Remove the visor.

How to Install the Visor

1. Align the visor pins with the mechanism holes.
2. Press to secure.

How to Use the Sun Visor

1. Open the sun visor.
2. Pull from both sides.
3. Pull from both sides again.
4. Remove the visor.

How to Remove the Sun Visor

1. Insert both sides.
2. Pull up.
3. Ready to use.

How to Install the Sun Visor

1. Insert both sides.
2. Pull up.
3. Ready to use.

Pinlock

Instructions for Pinlock installation and usage.

Ergo Padding

The helmet’s size adjustment system is achieved with internal sponges that allow for greater filling based on the shape of the head.

How to Install the Camera Side Support

1. Use a Tork screwdriver T10 or Hex screwdriver H2.5.
2. Follow the instructions to secure the support.

Lining Specifications

Details about the lining materials and specifications.

Removable Lining Parts

• Deflector
• Ear Pad (R)
• Ear Pad (L)
• Center Liner

FRS – Fast Release System

1. Pull the lever.
2. Slide the red button.
3. Pull the liner earpad (repeat the process on the other side).

How to Remove the Lining

1. Pull the earpads on both sides using the FRS system.
2. Pull the back side of the liner.
3. Release the springs.
4. Pull the frontal part of the liner.

How to Install the Lining

1. Insert the front of the liner.
2. Tighten the springs.
3. Insert on the back.
4. Make the strap pass through the earpads.
5. Slide the red button to loosen the earpads.
6. Insert the earpads securely.
7. Press and slide the FRS button until it is in the close position.
8. Press the pin to secure.

How to Change the Dust Filter with the Winter Filter

1. Remove the chin filter holder and the dust filter.
2. Insert the winter filter and the chin filter holder.

Accessories

• Helmet Bag
• Accessories Bag
• Camera Side Support
• Deflector
• Extra Visor *
• Pinlock *
• Winter Filter
• Small Screws x2
• *Available in some models

Size Chart

X.COM 3

Details about the X.COM 3 system, including installation and usage instructions.

Homologation Tag

The homologation tag is inserted here.

Maintenance and Care

• Do not expose the helmet to any type of solvent.
• The helmet should be handled with care. Dropping it may damage the paint and reduce its protective characteristics.
• Keep the helmet in a safe place (do not hang it on the motorcycle mirror or other supports that may damage the lining). Do not carry the helmet on the motorcycle or on your arm while riding.
• Always use the helmet in the correct position, using the buckle to adjust it to your head.

FAQs

How do I clean the visor?

Use only water and soap (preferably distilled) and a soft cloth. If the helmet is very dirty, you can add a bit of dishwashing liquid to the water. Remove the visor before performing a deeper cleaning.

How do I remove the visor?

Open the visor all the way up, push the button on both sides, and remove the visor.

How do I install the visor?

Align the visor pins with the mechanism holes and press to secure.

What is the FRS - Fast Release System?

The FRS system allows for quick and easy removal of the helmet lining and earpads. Pull the lever, slide the red button, and pull the liner earpad. Repeat the process on the other side.

How do I change the dust filter with the winter filter?

Remove the chin filter holder and the dust filter, then insert the winter filter and the chin filter holder.

What accessories are available for the helmet?

Accessories include a helmet bag, accessories bag, camera side support, deflector, extra visor, pinlock, winter filter, and small screws.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>