ASUS PCE-AX180 AX1800 Dual-Band Bluetooth 5.2 PCIe WiFi Adapter User Manual

October 28, 2023
Asus

ASUS PCE-AX180 AX1800 Dual-Band Bluetooth 5.2 PCIe WiFi Adapter

Setting up a Home Network

  1. Turn off your computer, unplug the power cord, and open the system cover. Insert the PCE-AX1800 wireless adapter onto the PCI Express x1 slot, and ensure that it is seated completely.ASUS PCE-AX180 AX1800 Dual-Band Bluetooth 5.2 PCIe WiFi Adapter 1

  2. Download the driver on ASUS official website and double click on “setup” to install WiFi driver or Bluetooth driver.ASUS PCE-AX180 AX1800 Dual-Band Bluetooth 5.2 PCIe WiFi Adapter 2

  3. Install WiFi Driver: Click install ASUS WLAN Card driver and follow onscreen instruction to complete the WiFi installation. When the setup is complete, connect your desktop PC to the Internet wirelessly via PCE-AX1800. ASUS PCE-AX180 AX1800 Dual-Band Bluetooth 5.2 PCIe WiFi Adapter 3

  4. Install Bluetooth Driver: Connect one end of the bundled USB cable to the USB port on PCE-AX1800 and the other end to the F_USB connector on the motherboard.
    Click install the Bluetooth driver and follow the onscreen instructions to complete the Bluetooth installation.ASUS PCE-AX180 AX1800 Dual-Band
Bluetooth 5.2 PCIe WiFi Adapter 4

  5. Open Device Manager. You can find PCE-AX1800 in the list if Bluetooth is successfully installed.ASUS PCE-AX180 AX1800 Dual-Band Bluetooth 5.2 PCIe WiFi Adapter 5

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference.
  • This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual.

WARNING:  This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Declaration of Conformity for Ecodesign directive 2009/125/EC

Testing for eco-design requirements according to (EC) No 1275/2008 and (EU) No 801/2013 has been conducted. When the device is in Networked Standby Mode, its I/O and network interface are in sleep mode and may not work properly. To wake up the device, press the Wi-Fi on/off, LED on/off, reset, or WPS button. This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 31 cm between the radiator & your body.

All operational modes:

  • 2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ax(VHT20), 802.11ac (VHT40), 802.11ax (HE20), 802.11ax (HE40),

BT LE, BT EDR

  • 5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80), 802.11ac (VHT160), 802.11ax
  • (HE20), 802.11ax (HE40), 802.11ax (HE80), 802.11ax (HE160)
  • The frequency, channel and the maximum transmitted power in EU are listed below:
  • 2400-2483.5 (BT LE/ BT EDR): 9.98dBm
  • 2400-2483.5MHz (1-13): OFDM: 19.97dBm (99.3mW); CCK: 19.73dBm (93.9mW)
  • 5150-5250MHz (36-48): 22.98dBm (198mW)
  • 5250-5350MHz (52-64): 22.99dBm (199mW)
  • 5470-5725MHz (100-140): 29.98dBm (995mW)
  • The adapter shall be installed near the equipment and shall be easily accessible

Safety Notices

  • Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C (104°F).
  • Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
  • DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
  • DO NOT place or drop objects on top and do not shove any foreign objects into the product.
  • DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
  • DO NOT cover the vents on the product to prevent the system from getting overheated.
  • DO NOT use damaged power cords, accessories, or other peripherals.
  • If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
  • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
  • DO NOT mount this equipment higher than 2 meters.

Authorized representative in United Kingdom: ASUSTEK (UK) LIMITED
Address: 1 Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England, United Kingdom
Tel: +44-01442-202-700
Fax: +44-01442-245-882
Support mail: network _support uk@asus.com
http://uk.asus.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals