SEIFERT 3152305 24V 510 BTU Peltier Control Cabinet Thermoelectric Cooler User Manual

: June 4, 2024
: SEIFERT

SEIFERT 3152305 24V 510 BTU Peltier Control Cabinet Thermoelectric Cooler

SEIFERT-3152305-24V-510-BTU-Peltier-Control-Cabinet-PRODUCT-
IMAGE

User manual

This instruction manual contains information and instructions to enable the user to work safely, correctly and economically on the unit. Understanding and adhering to the manual can help one:

Avoid any dangers.
Reduce repair costs and stoppages.
Extend and improve the reliability and working life of the unit.

PLEASE ENSURE TO USE THE RIGHT VERSION OF THE INSTRUCTION MANUAL SUITABLE FOR YOUR UNIT.

Intended use

qä=unit is to be used exclusively for the dissipation of heat from control cabinets and enclosures (stationary, not moving) in order to protect temperature sensitive components in an industrial environment. To meet the conditions of use, all the information and instructions in the instruction manual must be adhered to.

General danger
Indicates compulsory safety regulations which are not covered by a speciﬁc pictogram such as one of the following.
High electric voltage
Indicates electric shock danger.
Important safety instruction
Indicates instructions for safe maintenance and operation of the unit.
Attention
Indicates possible burns from hot components.
Attention
Indicates possible damage to the unit.
Instruction
Indicates possible danger to the environment.

Legal Regulations

Liability
The information, data and instructions contained in this instruction manual are current at the time of going to press. We reserve the right to make technical changes to the unit in the course of its development. Therefore, no claims can be accepted for previously delivered units based on the information, diagrams or descriptions contained in this manual. No liability can be accepted for damage and production caused by:

Disregarding the instruction manual
Operating error
Inappropriate work on or with the unit
The use of non-speciﬁed spare parts and accessories
Unauthorized modiﬁcations or changes to the unit by the user or his personnel

The supplier is only liable for errors and omissions as outlined in the guarantee conditions contained in the main contractual agreement. Claims for damages on any grounds are excluded.

Safety Instructions

Upon delivery the unit is already meeting current technical standards and can therefore be safely taken into operation. Only authorized personnel is allowed to work on the unit. Unauthorized personnel must be prohibited from working on the unit. Operating personnel must inform their superiors immediately of any malfunction of the unit.
Please note that before starting to work on or with the unit, a procedure must be carried out inside the cabinet on which the unit is to be mounted.
Before commencing work inside the cabinet, the control cabinet manufacturer’s instruction must be read with regards to:

Safety instructions.
Instructions on taking the cabinet out of operation.
Instructions on the prevention of unauthorized cabinet reconnection.

The electric equipment meets the valid safety regulations. One can ﬁnd dangerous voltages (above 50 V AC or above 100 V DC)

Behind the control cabinet doors.
On the power supply in the unit housing.

The unit has to be operated according to the type plate and the wiring diagram, and must be protected externally from overloading and electrical faults via suitable protective devices.

Danger through incorrect work on the unit
The unit can only be installed and maintained by technical competent and qualiﬁed personnel, using only supplied material according to the supplied instructions.
Danger from electrical voltage
Only specialized personnel are allowed to maintain and clean the unit. The personnel must ensure that for the duration of the maintenance and cleaning, the unit is disconnected from the electrical supply.
Attention
Damage to the unit through the use of inappropriate cleaning materials. Please do not use aggressive cleaning material.
Instruction
Damage to the environment through unauthorized disposal. All spare parts and associated material must be disposed according to the environmental laws.

Settings

Peltier cooling units are intended to be used as a complementary accessory to larger industrial equipment. They are used where heat needs to be dissipated from electrical control cabinets or similar enclosures in order to protect heat sensitive components.
Peltier cooling units can dissipate heat from sealed enclosures such as control cabinets. At the same time they can reduce the cabinet internal temperature to below the ambient air temperature. They are available in powder-coated sheet steel or stainless steel housings. Peltier units have additional heating function by changing the supply polarity of the thermoelectric elements. This is possible by using a combination of thermostats or having a speciﬁc polarity controller.
Peltier air conditioners are resistant to extreme ambient conditions and can operate eﬀectively even in environments which are dusty and oily and where temperatures may vary from -20°C to +65°C. For the cooling capacities and environmental ratings please refer to the type plate data.

Functional Principle

The thermoelectric elements create a temperature diﬀerence between the internal and ambient heat sinks, making internal air cooler while dissipating heat into the external environment. Fans help the transfer of convective heat from the heat sinks, which are optimized for maximum ﬂow. Peltier units be mounted in any position because these units don’t have a compressor and no moving parts.

Ambient fans
Ambient heat sinks
Thermol electric elements
Insulation
Internal heat sink
Internal fan

SEIFERT-3152305-24V-510-BTU-Peltier-Control-Cabinet-01

Technical Data

Order Number 3152305
Cooling Capacity L35L35 150 W
Operating Temperature Range -20°C – +65°C
Air Flow Volume (System / Unimpeded) Ambient air circuit: 120 / 260 m³/h
Cabinet air circuit: 60 / 170 m³/h
Mounting Wall mounted (with frame)
Housing Material Stainless steel AISI 304 (V2A)
Dimension A x B x C (D+E) 500 x 188 x 174 mm
Weight 12.7 kg
Cut Out Dimension 469 x 155 mm
Voltage / Frequency 24 V DC
Current L35L35 6.3 A
Starting Current 11 A
Max. Current 7.5 A
Nominal Power L35L35 170 W
Max. Power 180 W
Fuse 10 A (T)
Connection Connection terminal block
Ingress Protection IP 66, NEMA / UL Type 4X
Approvals CE, cURus

Mounting

Always switch oﬀ power supply before starting any work on the unit.=

Installation
Ensure that ﬂows of air leaving and entering the cooling unit, internal and external, are not obstructed. Before drilling the enclosure, ensure the ﬁxing elements and couplings will not interfere with the equipment inside the enclosure itself. When all mounting preparations are complete the actual mounting operation can commence. Only use the enclosed material to mount the unit on the cabinet.

Proceed as follows to mount the unit on the cabinet:

Set the unit up on the cabinet.
Ensure that the electrical connection is above the internal fan.
Unit without duct: screw the M6 locknuts & washers into the M6 set screws in the unit.
Unit with duct: screw the M6 screws & washers into the M6 threaded rivets in the unit. The resistance of the earth connection between cabinet and cooling unit must be <0.1Ω.

Condensate management

Depending on the mounting situation the condensation management may need to be considered and possibly adjusted.

Mounting Principle

In order to maintain the TYPE 4 rating, the tightening torque for this unit should be 4.5 Nm and needs to follow the below sequence.

SEIFERT-3152305-24V-510-BTU-Peltier-Control-Cabinet-02

Cut Out Dimension

SEIFERT-3152305-24V-510-BTU-Peltier-Control-Cabinet-03

Dimension (H x W x D)

SEIFERT-3152305-24V-510-BTU-Peltier-Control-Cabinet-04

Electrical Connection

High electric voltage present. Installation, maintenance, cleaning and any other work must be carried out by qualiﬁed personnel only. The personnel must ensure that for the duration of this work the unit and the cabinet are disconnected from the electrical supply and protected against unauthorized/accidental reconnection.

Instruction: Check that the available voltage, frequency and fuse rating are the same as those stated on the unit data label.

Connection to the main electricity supply
The mains connection is made via a cable. To connect the unit to the mains supply proceed as follows:

Disconnect the control cabinet from the mains.
See the connection details on the circuit diagram.
Note the connections on the four pole terminal block from the following table.

Terminal 24 V DC

1 Ambient Fan +
2 Ambient Fan –
3 Internal Fan +
4 Internal Fan –
5 Thermoelectric Elements +
6 Thermoelectric Elements –

Ensure that the correct polarity is maintained. The fans should have clockwise rotation.

Connect the unit to the mains.
Take the control cabinet back into operation in the prescribed manner.

Power consumption and start-up current are stated on the data label and under technical data.

Wiring Diagram

TE Thermoelectric Elements
IF Internal Fan
AF Ambient Fan

Internal fan must operate continuously. Ambient fan and thermoelectric elements must be controlled simultaneously by a thermostat (or similar temperature controller).

Taking into Operation

The power supply rating on the rating plate must comply with mains supply

Always disconnect the power supply before opening the unit.

Heat load to be dissipated from enclosure should not exceed speciﬁc cooling output of the unit at any condition. While selecting a cooling unit always cater for a safety margin of at least 15% extra cooling output.
The Peltier – elements should be controlled by a suitable thermostat. Models TG 6XXX with 100 – 230 V supply have already a controller integrated.

Trouble Shooting

In case of a fault please contact your nearest servicing oﬃce. A list of service partners can be found on our website www.seifertsystems.com

Maintenance & Cleaning

Always switch oﬀ power supply before starting any work on the unit. Only qualiﬁed personal may conduct any maintenance work on the cooling unit.

All Peltier units are virtually maintenance-free and no ﬁlters which need to be cleaned or replaced. Check the ambient heat sinks from time to time. In case they are dirty proceed as following:-

Disconnect the enclosure from the mains.
Clean the heat sink proﬁle as required by blowing it out with compressed air. In cases of extreme pollution wet cleaning is required.

The unit must be removed from the control cabinet for wet cleaning

Should a wet cleaning be necessary proceed as following:

Disconnect the whole plant from the mains.
Remove the unit from the cabinet.
Ensure that the seals are not damaged.
Wash the heat sink with an environmentally safe cleaning ﬂuid.

Danger to the environment through unauthorized disposal.

Disposal
Dispose of cooling unit and used parts with due regard for the environment and in accordance with environmental laws and regulations.

Maintenance

Note: Only use original replacement parts when repairing the unit. This ensures that the unit functions perfectly and remains safe.

Fan replacement: The average working life of the fan is ca. 40,000 hours under normal conditions. Should a fan replacement be necessary proceed as following:

Disconnect the unit from the mains.
Remove the unit cover.
Remove the screws from the relevant fan.
Mount a new fan.

Damage to the unit through incorrect work.
Make sure that the cabinet fan or the ambient fan are not misplaced in the unit as they are diﬀerent. Ensure that the correct polarity is maintained. The fans must rotate clockwise!

Replace the 4 fan ﬁxing screws.
Close the unit and take it back into operation.

Transport & Storage

During transport and storage, the cooling unit must be kept in the position marked on the box and at a temperature between -40˚C and 70˚C and a relative humidity of max. 95% (at 25°C). In case of damaged packaging after transport or in-house handling, we recommend controlling the unit for any internal damages.