ACEKOOL Kettle KB1 Glass Electric Tea Kettle Instruction Manual

Kettle KB1
INSTRUCTION MANUAL

Thanks for your order. Please read the user manual thoroughly before using the kettle and keep t h i s user manual for your future reference.

SAFETY INSTRUCTIONS

Please read all In before use and keep this manual for future reference.
Please follow these basic safety precautions when using t h e kettle.

Before use

• Before connecting the power supply, check that the voltage indicated on the appliance (underside of the base) corresponds with the voltage In  your home. If this is not corresponding, contacting w I t h your dealer and do not use the kettle.
• Please stop using the immediately if the power cord or kettle is damaged. Please ask the manufacturer, service agents, or similarly qualified persons for help to avoid the danger.

When use

• Place the kettle in a dry and flat counter, do not on any hot surface or near the heating stove.
• Do not touch any part of the kettle except the handle when using it, such as the base, glass, metal accessories, and other parts. Because they will get hot when in use and keep hot for a time after use, and it will cause burns or other injuries.
• Ensure the lid is closed and do not lift it while the water is boiling. For avoiding being scalded by steam, please do not open the lid immediately after the water boils and turn the kettle off.
• Please keep the water level between the lowest and highest. Do not use the kettle when water is lower than the minimum level.
• If you accidentally allow the kettle to operate without water, the boil-dry protection will automatically switch the kettle off. In this case, please wait 10-15 minutes for this kettle to cool down before filling it with water and heating it in order to prevent oxidation and yellowing of the stainless steel.
• The kettle can only be used with the base provided.
• Please be careful to pour the water and moving the kettle.

After use

• Ensure the kettle is cooling down before opening the lid, taking off the parts, and cleaning the kettle.
• Please unplug the plug after use and before cleaning for avoiding short circuits and electric shocks.
• Do not dip the base and kettle in water or any liquid nor rinse with running water.
• Please do not hang the cord or any extension cords over the edge of the table or counter for preventing trips.
• Please do not use tools or detergent that may scratch the product to wipe the glass and stainless steel parts.

1. Ensure the kettle is turned off before removing the kettle from the base.
2. This device is not intended for use by persons (Including children) with difficulties in mobility, sense, mental or lack of experience and knowledge. Unless they have been given supervision or instruction concerning the use of the appliances by a person responsible for their safety.
3.  This kettle can not be used and played with by children, please keep it out of reach of them. They need to be supervised if they approach the kettle.
4.  Please empty and clean the kettle after use, please refer to the user manual if necessary.
5. This product is for home use only, not for commercial purposes.
6. This product must not be disposed of as ordinary household waste at the end of its useful life and must be sent to a collection station for recycling electrical and electronic equipment.

SPECIFICATIONS

Heating preservation time: 1~24 hours (Adjustable)

PMR KNOWS YOUR KETTLE

| Keep warm function button
---|---
| Temperature adjustment button (Up)
| Temperature adjustment button (Down)

HOW TO USE

Clean the tea infuser
The tea infuser is detachable, please clean it with a wet cloth regularly.

Before the First Time Use

Please clean the kettle first, fill the kettle with water, place the kettle on the base, turn the product on, then boil the water twice, and finally drain the water.
Note: Please ensure the water level is between the “MIN” and “MAX”.

Light Indication

Blue light indicates the standby state. The red light indicates the working state.

Standby State

Plug the kettle in, this product will power on automatically. All lights and digital display screen show in a blur for 1s while the kettle emits a beep. And then the display screen shows the current temperature. If there is no button operation within 10s, all lights are completely off and the show a blue flash.

Boiling Function

Usual Boiling Function
Press the light of the button are shown in red at the same time, and the display screen shows the default value The kettle starts to heat the water up. When the water temperature reaches 100°C  (212°F), the kettle will be shut off automatically with a sound of “beep”. ( If there is no button operation within 10s, all lights and the display screen extinguish while showing a blue flash.)

Specified Boiling Function
Press and set the specified temperature by the short press, the kettle will shut off automatically with a sound of “beep” when the water reaches the set temperature. ( If there is no button operation within 10s, all lights and the display screen extinguish while shows a blue flash.)
NOTE:

• The kettle will get into a standby state and display the current temperature if you press (1) again while working.
•  The temperature can be adjusted from 40°C to 100°C (104-212°F). Each press to adjust +/- 5°C (+/-9°F).

Keep Warm Function

Setting the specified temperature
Power the kettle up, press then press , (and stays in red which indicates the kettle gets into the state of heat preservation. Press to adjust the temperature. The kettle will stop heating with the sound of a “beep” and enter a heat preservation state when if heats up to the set temperature. At the same time, the display screen shows the current temperature and extinguishes. shows a red flash and the lights of the body stay in blue.

Setting the heat preservation time
A long press and the display screen show the current heat preservation time after setting the temperature. Then press to set the heat preservation time (Default heat  preservation time: 5 hours; a range of heat preservation time: 1-24 hours.)

NOTE:

• If the water temperature is lower 5°C (9°F) than the set temperature, the kettle will heat water up to the set temperature automatically.
• If the current temperature is higher than the set temperature, the kettle will directly enter the standby status and won’t heat the water up.
• If your press (!) or $5 during the heating preservation state, the kettle will get into the standby state and the display screen will display the current temperature. (If there is no button operation within 10s, all lights and the display screen extinguish while (!) shows blue flash.)
• If the kettle is removed from the base for more than 15 minutes, the kettle will exit the heat preservation state.

Automatic Boiling Point Detection Function

In the plateau section, this kettle will automatically detect the local boiling point. When a certain temperature is detected as the local boiling point, the chip intelligently compensates the displayed temperature to 100°C (212°F). Then the kettle shuts off automatically.

Power-off Memory Function

After being removed during the working period, the kettle will recover the previous settings and go on working when placing it back the base within about 15 minutes. If you don’t need the previous settings, just press!) to turn the kettle off.

Turn The Atmosphere Light ON/OFF

The lights of the body stay in red by default during heating and heat preservation states.
Long press (!) for 3s to turn the light on or off.

Protective Function

• When the sensor of the heating disc becomes short-circuited, the kettle will stop heating and emit 6 beeps, the digital display screen will show .
• The kettle is equipped with boil-dry protection. When in boil-dry, the kettle will shut off automatically and emit 6 beeps, and the digital display screen will show In this case, please wait 15 minutes for the kettle to get cool before filling the water and reusing it.

After-Sale Service Guarantee

12 month warranty is provided from the date of purchase. If you have any issues or queries when using this device, please contact us: at support@acekool.vip.

ACEKOOL
— Make Life Easier —
Model: ME-L1520

Email : support@acekool.vip
Website: https://www.acekool.vip
Made in China

Documents / Resources

| ACEKOOL Kettle KB1 Glass Electric Tea Kettle [pdf] Instruction Manual
Kettle KB1 Glass Electric Tea Kettle, Kettle KB1, Glass Electric Tea Kettle, Glass Tea Kettle, Electric Tea Kettle, Tea Kettle, Glass Kettle, Kettle
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>