ACEKOOL BC7 Blender Instruction Manual

ACEKOOL BC7 Blender

Specifications

Voltage: 120V
Frequency: 60Hz
Power: 300W
Capacity: 0.6L

Important Safety Information

When using this electrical appliance please follow these basic safety precautions:

• Read all instructions before operating.
• Ensure that the voltage set on the machine corresponds to the supply of electricityin your country.
• If there is a problem, remove the main plug from the wall outlet.
• Do not operate the appliance with a damaged cord or plug if the appliance malfunctions or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment.
• Do not connect this product to a timer to avoid dangerous situations.
• To protect against electrical shock, do not immerse cord, plug, or appliance itself in water or other liquids.
• Do not put your fingers or any sharp object when the device is running, causing damage to the product and/or injury.
• When using the product, please use the original accessories provided by the manufacturer.
• If the power supply cord is damaged, it must be replaced by the manufacturer, a service agent, or similarly qualified persons in order to avoid fire hazard.
• After the device is finished using, please remove the motor unit once it stops completely all blades do not operate any more.
• Do not let children play with the appliance. This appliance is not intended for use by persons with reduced physical sensory or mental capabilities or lack of experience and knowledge, unless they use the appliance under the supervision of a person responsible for their satety.
• For home use only. Not for commercial use.
• Store appliance in a dry place away from sunlight.
• After removing the sleeve of blade, please remove the motor unit directly to avoid cutting the consumer when using it again.

Product Description

Installation

1. Take the machine out of the box.

2. Take the lid off. Take out the knife.

3. Remove the Knife sleeve with care, and then throw it into the trash.

4. Put the ingredients into the bowl.

5. Cover the top cover and attach the non- slip mat to the bottom of the glass bowl.

6. Cover the motor unit, plug in the power and start beating.

Operating Instructions

• Before use, clean the bowl, blade and top cover.
• Take off the bowl and top cover from the motor unit.
• Place the blade on the blade supporter.
• Please make sure that the blade is on the blade supporter before you put food into the glass jar.
• Place the glass jar on the motor unit and make sure they are in correct position.
• Insert plug into wall outlet and switch on the power.
• Hold the motor unit with your hand and press the button to start the machine running. Release the button to stop the machine running.

CAUTION: In order to prolong useful life of the machine, never run it more than 30 seconds per time. Stop the device for 120 seconds before using it again.

• After you let go of the button to run the machine and wait until the blade stops rotating before removing the bowl from the motor unit.
• The Blades are very sharp. In order to avoid injury, please take out the blades first and then take out the food.

CAUTION: To protect bowl against heat deformation and leak, do not put hot water or food which the temperature is higher than 70°C.

Approximate Running Times

(Cut to 20 x 20 x 50mm)

| ****

20-30 Seconds

Garlic| 150 Grams .| 10-20 Seconds
Hot peppers| 150 Grams .| 10-20 Seconds
Carrots| 150 Grams .| 10-20 Seconds
Parsley| 300 Grams .| 10-20 Seconds
Liquids| 150 Grams .| 20-30 Seconds

Attentions

• Do not use AC power over than 120V, otherwise there is a risk of electric shock or
• Use a single socket with standard 6A or more. If the socket is shared with other appliances, it may cause abnormal heat or
• Unplug device when it is not i11 u se.
• Do not use iron objects to scratch the machine .
• The product caI1not be used to process hard foods such as: meat with bones, coffee beans, black pepper, or
• The blades are very sharp . Please hold the top part of the blade supporter directly rather than the blades when you remove it. For safety, please wear gloves to disassemble the blades from the blade sup p ort er .
• The bowl caI1 011ly withsta11d temperatures of 0°C-S0°C. Do not put the bowl into the microwave or put the food beyond the temperature range i11to the
• Before you put food into the bowl, confirm that the blade is in position. If the blade is not running or running slowly, pull out the plug and check whether there is any obstruction . Take out the obstruction before plugging the device back
• Never run the applia11ce for more than 30 seconds continuously . After run11ing for 30 seconds, stop for 2 minutes. The machine should be  stopped  for  15 minutes after using it for 3 time continuously. Wait for the motor to cool down before running again .
• The glass is easy to clean and the blade can be cleaned with the brush. If the glass bowl needs to be washed in the dishwasher, please note that the temperature differe11ce that the glass bowl bears is 50°C a11d its highest temperature does not exceed 70°C.
• Never immerse the motor unit or put it into water. Simply wipe it with a damp sponge.
• If the machine has not been used for a long time, please store this machine at a dry and well-ventilated

Troubleshooting Guide

If you find that the machine is not operating normally, please check the following items before sending it for repair:

1. The voltage is too low.
2. If the motor is overload­ed, the power will cut off automatically.

|

1. Check power supply for compliance with rated voltage .
2. Pull plug  of power supply out of outlet,  wait for the motor to cool down (about 30 min), then use it again .

There is smell at the first use.| Normal situation for new machine.| If the device has been running for a long  time and it still has smell, please send it back to us.
The machine is unusually vibrating or noisy.|

1. The blade is not in th e correct place.
2. The machine do not put on stable surface.
3. The voltage is too high.
4. The ingredients exceed over the max filling level.

|

1. Take out all the ingredi­ ents and put blade in place. 2.Put the machine on stable surface.
2. Check power supply for comp liance with rated voltage.
3. Remove the plug from the outlet then take out  the extra ingredients.

Model: BM-205

Email: [email protected]
Website: https://www.acekool.vip
Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>