CITEL N120902f DC Surge Protector Instruction Manual
- June 4, 2024
- CITEL
Table of Contents
CITEL N120902f DC Surge Protector
Technical Data
Installation
Wiring
All configurations
Configuration 1
Configuration 2, 3 or 4
Remote contact wiring
Remote signal for disconnection information
- 11-12 Closed = SPD OK
- 11-14 Open = SPD OK
- 11-12 Open = SPD disconnect
- 11-14 Closed = SPD disconnect
Maintenance
SAFETY INSTRUCTIONS
- Installation must be performed only by an electrically skilled operator.
- National electrical installation rules must be followed.
- The unit must be used only as a surge protector and according to the conditions described in this document.
- Surge protectors must be selected in relation to a dedicated AC network (see Table 1)
- Dedicated fuses must be installed in the surge protector branch (see Table 2 column 1).
- In the case of a red indicator, the surge protector must be replaced.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>