FLASH F7300258 Tube FX 360 LED Lamp User Manual
- June 4, 2024
- FLASH
Table of Contents
FLASH F7300258 Tube FX 360 LED Lamp
Specifications
- Voltages: AC 100V-240V 50/60Hz
- Light Source: 28W LED
- Color System: RGBWA Mixed color (Lee Colors + CTO)
- Maximum Running Time (Full Light): Up to 12 hours
- Maximum Running Time (Solid Light): Up to 8 hours
- Charging Time: 7 hours
- Stroboscopic: 0-30HZ
- Dimming: 4 dimming modes
- Control Mode: Wireless DMX, Mobile APP, Remote Control IR
- Channel Options: 4ch/5ch/6ch/7ch/12ch/16 ch/80ch/160ch
- Display: OLED Display Screen
- Power Supply: Charging interface in the transport case, can be charged by 2x powerCON connectors
- Signal Connection: 2.4G wireless connection within effective distance
- Battery: Lithium electronic battery, 9600MAH
- Dimensions: 143.5 cm (length) * 5cm (diameter)
- Lamp Weight: 2.5kg
- Case Weight (including accessories): 50kg
- Case Dimensions: H: 26cm, W: 154cm, D: 55cm
- Heat Dissipation System: Natural heat dissipation
- Shell Material: Aluminum alloy, semi-light oxidized
- Accessories: Infrared IR remote control and charger (for each piece)
Product Usage Instructions
Safety Information
It is important to follow these safety guidelines while using the TubeFX 360:
- Keep the user manual for future reference.
- If selling the fixture, ensure the new user receives the instruction booklet.
Setup and Operation
- Unpack the fixture and check for any transportation damage before use.
- Ensure the voltage and frequency of the power supply match the fixture’s requirements.
INTRODUCTION
-
Unpack and check carefully there is no transportation damage before using the unit•Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit •It’s important to ground the yellow/green conductor to earth in order to avoid electric shock
-
The unit is for indoor use only. Use only in a dry location
-
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure that no ventilation slots are blocked
• Disconnect main power before replacement or servicing -
Make sure there are no flammable materials close to the unit while operating as it is fire hazard
-
Use safety cable when fixes this unit. DO NOT handle the unit by taking its head only, but always by taking its base
-
Maximum ambient temperature is Ta: 40°C. DO NOT operate it where the temperature is higher than this Unit surface temperature may reach up to 85°C. DO NOT touch the housing bare-hand during its operation. Turn off the power and allow about 15 minutes for the unit to cool down before replacing or serving
-
the event of serious operating problem, stop using the unit immediately.Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts
-
DO NOT touch any wire during operation as high voltage might be causing electric shock. Warning: To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged Caution: There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact your nearest dealer.
INTRODUCTION
THANK YOU FOR PURCHASING TubeFX 360. FOR SAFETY RE-ASONS AND TO ENSURE THE TROUBLE-FREE OPERATION, CARE-FULLY READ THE INSTRUCTIONS.
SAFETY INFORMATION
- Please keep this User Manual for future consultation. If you sell the fixture to another user, be sure that they also receive this instruction booklet.
- Unpack and check carefully there is no transportation damage before using the fixture.
- Before operating, ensure that the voltage and frequency of power supply match the power requirements of the fixture.
- It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
- Disconnect main power before servicing and maintenance.
- Use safety chain when fixes this fixture. Don’t handle the fixture by taking its head only, but always by taking its base.
- Maximum ambient temperature is: 40°C Don’t operate it where the temperature is higher than this.
- In the event of serious operating problem, stop using the fixture immediately. Never try to repair the fixture by yourself.
- Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized techni-cal assistance center. Always use the same type spare parts.
- Do not connect the device to any dimmer pack.
- Do not touch any wire during operation and there might be a hazard of electric shock.
- To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain or moisture.
- The housing must be replaced if they are visibly damaged.
- Do not look directly at the light spot while the fixture is on.
- VOLTAGES: AC 100V-240V 50/60Hz Light source: 28W LED
- Color system: RGBWA Mixed color (Lee Colors + CTO)
- Maximum running time (full light): 1 hour /2 hours /3 hours /4 hours /5 hours /6 hours /7 hours /8 hours /9 hours /10 hours /11 hours /12 hours mode is optional.
- Maximum running time (solid light): up to 8 hours.
- Charging time: 7 hours Stroboscopic: 0-30HZ
- Dimming: 4 dimming modes Control mode: wireless DMX, Mobile
- APP, remote control IR
- Channel: 4ch/5ch/6ch/7ch/12ch/16 ch/80ch/160ch
- Display: OLED display screen
- Power supply: The charging interface is in the transport case. Case can also be used for charging by 2x powerCON connectors.
- Signal connection: 2.4G wireless connection, wireless connection within effective distance
- Battery: lithium electronic battery, 9600MAH
- Dimensions: 143,5 cm(length) *5cm (diameter)
- Lamp Weight: 2.5kg
- Case (weight of a set of appliances including accessories): 50 kg
- Case Dimensions: H: 26 cm W: 154 cm D: 55cm
- Heat dissipation system: natural heat dissipation
- Shell: aluminum alloy, semi-light oxidized.
- Accessories: infrared IR remote control and charger (for each piece).
The package includes
- – LED LAMP (8 pcs)
- – Chargers (8 pcs)
- – User Manual (1 pc)
- – Transport Case (1 pc)
Voltage Specification.
Input Voltage | Frequency | Total Power |
---|---|---|
100-240[V] AC | 50/60[Hz] | 28 [W] |
Key operation diagram
Menu Operation Instructions
Address | 001-512 | Address code mode |
---|
Channel
| 4CHA| 4A channel mode
4CHB| 4B channel mode
5CH| 5 channel mode
6CHA| 6A channel mode
6CHB| 6B channel mode
7CH| 7 channel mode
12CH| 12 channel mode
40CH| 40 channel mode
80CH| 80 channel mode
160CH| 160 channel mode
DMX Fail| Hold| DMX 512 data retention
Blackout| DMX Data is not retained (black field)
Dimmer Curve
| Curve 1| Linear curve
Curve 2| Square curve
Curve 3| Logarithmic curve
Curve 4| S-curve
Custom| Red: 0-255| Red manual dimming
Program| Green: 0-255| Green manual dimming
| Blue: 0-255| Blue manual dimming
| White: 0-255| White manual dimming
| Yellow: 0-255| Yellow manual dimming
|
Color
| Dim: 0-255
| Color: 1-27
| Strobe: 0-255
| Lee Color| DIM: 0-255|
| | Lee Color| L101
| | | L102
| | | L105
---|---|---|---
| | | L106
| | | L107
| | | L110
| | | L111
| | | L115
| | | L116
| | | L118
| | | L119
| | | L121
| | | L124
| | | L126
| | | L127
| | | L128
| | | L132
| | | L135
| | | L139
| | | L147
| | | L151
| | | L152
| | | L158
| | | L164
| | | L174
| | | L179
| | | L180
| | | L201
| | | L203
| | | L204
| | Strobe: 0-255|
| CCT| DIM: 0-255|
| | | 1750K
| | | 2000K
| | | 2250K
| | | 2500K
| | | 2750K
| | | 3000K
| | | 3250K
| | | 3500K
| | | 3750K
| | | 4000K
| | | 4250K
| | | 4500K
| | | 4750K
| | | 5000K
| | | 5250K
| | | 5500K
| | | 5750K
| | | 6000K
| | | 6250K
| | | 6500K
---|---|---|---
| | | 6750K
| | | 7000K
| | | 7250K
| | | 7500K
| | | 7750K
| | | 8000K
| | | 8250K
| | | 8500K
| | | 8750K
| | | 9000K
| | | 9250K
| | | 9500K
| | | 9750K
| | | 10000K
| | G/M: -1.00–1.00|
| HSI| DIM: 0-255|
| | HUE: 0-360|
| | STA: 0-100|
| Auto| Auto Mode: 0-60|
| | Speed: 1-16|
| | STA: 0-100|
| Sound| Sound Mode: 0-3|
| | SENS: 0-100|
| | Color: 0-27|
| WIFI| LED_XXX|
Master/Slave| Master| |
| Slave| |
Wireless DMX| On| |
| Off| |
| Clear| |
| Pairing| |
Run Time| 1h/2h/3h/4h/5h/6h/7h/8h/9h/10/11h/12h
Information| Version 1.0
| Current Time 00H35M 00S
IR| ON| |
| OFF| |
Menu Lock| ON| |
| OFF| |
Back Light| Always On| |
| 10s| |
| 20s| |
| 30s| |
Factrory Reset| ON| |
| YES| |
Advanced parameter settings:
(In A001 mode, press the confirm button for 3 seconds to enter)
Red | 000-255 | Red current regulation |
---|---|---|
Green | 000-255 | Green current regulation |
Blue | 000-255 | Blue current regulation |
White | 000-255 | White current regulation |
Yellow | 000-255 | Yellow current regulation |
State | Single | Currently on |
Whole | All bright | |
T.Limit | 060 | Power reduction setting (OFF/function off, power reduction on / |
40-100 degree setting range)
Delay| YES| Dimming delay on
NO| Dimmiing delay off
DMX CHART
CH No | 4CHA | 4CHB | 5CH | 6CHA | 6CHB | 7CH | 12CH | 16CH | 80CH | 160CH |
---|
CH1
| 0-1
close the
light 1-255
total
dimming
| 0-1
close the
light 1-255
total
dimming
| ****
0-255
Red
dimming
| 0-1
close the
light 1-255
total
dimming
| 0-1
close the
light 1-255
total
dimming
| 0-1
close the
light 1-255
total
dimming
| ****
0-1 close the light
1-255 total dimming
| ****
R-1
| ****
R-1
| ****
R-1
CH2
| 0-10
none
11-255
Strobe
| 0-10
none
11-255
Strobe
| 0-255
green dimming
| 0-10
none
11-255
Strobe
| 0-255
red
dimming
| 0-10
none
11-255
Strobe
| ****
0-10 none
11-255 Strobe
| ****
G-1
| ****
G-1
| ****
G-1
CH3
| ****
0-4
none
5-255
color
temp.
| ****
0-4
none
5-255
tune RGB mixed color
| ****
0-255
blue dimming
| ****
0-4
none 5-255 RGB
mixed
color
| ****
0-255
green dimming
| ****
0-255
red
dimming
| 0-10 cycle color mixing 11-19 red
20-28 green
29-37 blue
38-46 white
47-55 yellow
56-64 red+green
65-73 green+blue
74-82 red+blue
83-91 red+green
92-100 green+blue
101-109 red+yellow
110-118 red+green
119-127 green+blue
128-136 red
137-145 blue+yellow
146-154 yellow+white
155-163 green+white
164-172 green+yellow
173-181 red+blue+white
182-190 red+yellow+white
191-199 green+blue+white
200-208 green+blue+yellow
209-217 blue+yellow+white
218-226 red+green+blue+white
227-235 red+green+blue+white
236-244
green+blue+white+yellow 245-255
red+green+blue+white+yellow
| ****
B-1
| ****
B-1
| ****
B-1
CH4
| ****
0-255
tune GM
| ****
0-255
color
saturation
| ****
0-255
white dimming
| ****
0-255
tune GM
| ****
0-255
blue dimming
| ****
0-255
green dimming
| 0-16 none
17-33 background red
34-50 background green
51-67 background blue
68-84 background white
85-101 background yellow
102-118 background green+blue
119-135 background green+blue
136-152 backround red+blue
153-169 background red+green
170-186 background green+blue
187-203 background red+yellow
204-220 background red+green
221-237 background green+blue
238-254 background red+blue
255 background blue+yellow
| ****
W-1
| ****
W-1
| ****
W-1
CH5
| | | 0-255
yellow dimming
| 0-4 none
5-255
color temp.
| 0-255
white dimming
| 0-255
blue dimming
| 0-1 none
2-255 base tint
| ****
Y-1
| ****
Y-1
| ****
Y-1
CH6
| | | | ****
0-255
color
saturation
| ****
0-255
yellow dimming
| ****
0-255
white dimming
| 0-10 none
11-214 Effects (60 types, one effect with 3 values)
215-220 All effects
221-255 voice control
| ****
R-2
| ****
R-2
| ****
R-2
CH7
| | | | | | 0-255
yellow dimming
| ****
0-255 effect speed
| ****
G-2
| ****
G-2
| ****
G-2
CH8| | | | | | | 0-255 red dimming| B-2| B-2| B-2
CH9| | | | | | | 0-255 green dimming| W-2| W-2| W-2
CH10| | | | | | | 0-255 blue dimming| | |
CH No| 4CHA| 4CHB| 5CH| 6CHA| 6CHB| 7CH| 12CH| 16CH| 80CH| 160CH
---|---|---|---|---|---|---|---|---|---|---
CH11| | | | | | | 0-255 white dimming| R-3| R-3| R-3
CH12| | | | | | | 0-255 yellow dimming| G-3| G-3| G-3
CH13| | | | | | | | B-3| B-3| B-3
CH14| | | | | | | | W-3| W-3| W-3
CH15| | | | | | | | Y-3| Y-3| Y-3
CH16| | | | | | | | R-4| R-4| R-4
CH17| | | | | | | | G-4| G-4| G-4
CH18| | | | | | | | B-4| B-4| B-4
CH19| | | | | | | | W-4| W-4| W-4
CH20| | | | | | | | Y-4| Y-4| Y-4
CH21| | | | | | | | R-5| R-5| R-5
CH22| | | | | | | | G-5| G-5| G-5
CH23| | | | | | | | B-5| B-5| B-5
CH24| | | | | | | | W-5| W-5| W-5
CH25| | | | | | | | Y-5| Y-5| Y-5
CH26| | | | | | | | R-6| R-6| R-6
CH27| | | | | | | | G-6| G-6| G-6
CH28| | | | | | | | B-6| B-6| B-6
CH29| | | | | | | | W-6| W-6| W-6
CH30| | | | | | | | Y-6| Y-6| Y-6
CH31| | | | | | | | R-7| R-7| R-7
CH32| | | | | | | | G-7| G-7| G-7
CH33| | | | | | | | B-7| B-7| B-7
CH34| | | | | | | | W-7| W-7| W-7
CH35| | | | | | | | Y-7| Y-7| Y-7
CH36| | | | | | | | R-8| R-8| R-8
CH37| | | | | | | | G-8| G-8| G-8
CH38| | | | | | | | B-8| B-8| B-8
CH39| | | | | | | | W-8| W-8| W-8
CH40| | | | | | | | Y-8| Y-8| Y-8
…..| | | | | | | | | …..| …..
CH156| | | | | | | | | | R-32
CH157| | | | | | | | | | G-32
CH158| | | | | | | | | | B-32
CH159| | | | | | | | | | W-32
CH160| | | | | | | | | | Y-32
Infrared IR remote control function:
-
Dimming and speed, UP key
-
Dimming and speed, DOWN key
-
OFF – Turn off the light
-
ON – Turn on the light
-
R, G, B, W, Y – keys are five kinds of monochrome
-
The UV key is the color temperature mode, and the
UP and DOWN keys are used to select. -
9 numeric keys for 9 static color mixing (AC1…AC9)
-
The 0 key is the A001 mode receiving mode, the up and down keys select the address
-
The AUTO key is the color-changing mode, and the
UP and DOWN keys are used to select the speed. -
The STROBE key is the color selection stroboscopic mode (27 kinds can be selected), and the UP and DOWN keys are used to select the speed.
-
The FADE key is in gradient mode, and the UP and DOWN keys are used to select the speed.
-
The SOUND key is the voice control mode, and the UP and DOWN keys are used to select the mode.
Wi-Fi control operation steps:
- Step 1: The mobile phone first installs the APP of this software (LED LAMP)
- Step 2: The lamp display function is switched to Wi-Fi mode. After confirmation, LED-XXX will appear, (XXX represents= 3 digits).
- Step 3: Click the setting icon on the phone, turn on the Wi-Fi and search for the Wi-Fi address, the word LED appears. Such as „LED-XXX”, click the link, and exit this interface after the connection is succesful.
- Step 4: Click the LED LAMP icon on the mobile phone, it shows that the connection is succesful and you can control it. (The lighting APP control software can only use LED LIGHT control software).
Features
- Support master-slave connection advanced parameter setting
- Support standard DMX512 and wired RDM
- Support software online upgrade
- Support temperature control setting
- Support wireless 2.4G connection
- Support mobile APP control (Android and Apple)
FLASH-BUTRYM Sp.j.
Skarbimierzyce 18 · 72-002 Dołuje · POLAND
WWW.FLASH-BUTRYM.PL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>