Pyle PLCMDVR77 Dash Cam Rearview Mirror Monitor User Manual
- June 3, 2024
- Pyle
Table of Contents
Pyle PLCMDVR77 Dash Cam Rearview Mirror Monitor
DESCRIPTION
- Vehicle DVR Dash Cam Kit
- HD Video Recording System with Rearview Mirror Monitor, 7.4’’ -inch LCD Display, Compact Dash Cam, Rear-View Backup Camera
MONITOR WIRING CONNECTION
REARVIEW BACKUP CAMERA
Angle Adjustable Camera Lens
Located on the camera housing are 2 screws which lock the camera lens angle in position. The screws may be loosened to allow camera lens angle adjustment. Loosen the screws, adjust the camera lens into the desired angle, then tighten the screws securely. Be sure as to not overtighten the screws.
OPERATION INSTRUCTIONS
- V1 connect the left optic camera signal; V2 camera signal connection (reverse priority display); V3 connection right camera signal.
- Trigger (rearview camera line) displays rear camera screen; trigger (left video line) shows the left optic camera; trigger (right video line) display right depending on the camera screen; no automatic trigger machine after shutdown.
- Press the menu button to display the menu, then press (regulation) (or regulation) can adjust the size parameters.
- The environment sensing function, the screens brightness may change while the changing of ambient light, if ambient light is strong, the brightness of the screen will increase, in order to get a clearer image in the same light; when the ambient light is weak, the brightness of the screen can be reduced. Make sure the brightness is right, not too bright and irritating to the eyes.
REARVIEW BACKUP CAMERA QUICK INSTALLATION
Connect the camera to the using the included DC 12V power cable. Connect the
DC 12V power cable to the positive 12V reverse tail light in the rear of your
vehicle. Then, connect the black wire, of the DC 12V power cable, and ground
properly. This connected power and ground cable then connects to the camera,
and will supply power to the camera directly. Next, use the included yellow
RCA video connector cable, and run that cable from the yellow RCA video
connector jack of the camera, to the yellow video connector of your compatible
display monitor.
Yellow RCA cable when connected, automatically retrieves the video signal when
activated (when your vehicle is switched into the reverse gear).
- Locate the reverse taillight wiring behind your vehicle’s reverse light. You may need to remove an interior panel, or other cover, in order to locate the wiring. Connect the included power 12V DC power cable to the reverse light.
- Connect the power cable’s Red wire to your vehicle’s reverse light positive wire.
- Connect the power cable’s Black wire to your vehicle’s reverse light negative wire.
- Connect the camera to this ‘reverse light’ connection installation, then mount the camera in the desired location.
- Run the RCA video cable from the camera to your compatible video display monitor.
SYSTEM FEATURES
- Vehicle DVR Driving Video Recording System
- Rear-View Mirror Assembly with Built-in 7.4’’ -inch Display Screen
- Camera + Camcorder: Snap Pictures or Record Video
- Night Vision Illumination
- Built-in G-Sensor Auto-save Recording during Collision
- Built-in Microphone for Audio Recording
- True Color Reproduction and Image Adjustment
- Micro SD Memory Card Slot
- Easy File Saving & Sharing
- Universal Dashboard / Windshield Mountable
- Designed to Replace Your Existing Rear-View Mirror Assembly
WHAT’S IN THE BOX
- Rearview Mirror Assembly
- DVR Dash Cam
- Backup Camera
- Power & Wiring Harness
- RCA Video Cable
- Camera Power Supply Cable, 3.2’ ft.
BACKUP CAMERA
- Video System: PAL/NTSC Auto Switching
- Image Sensor: 1/4” Color CMD
- Effective Pixel: 656 x 492Pixels
- Resolution: 420 TV Lines
- Lens Angle: 170° Degree
- Marine Grade Rating: IP-69
- Video Output: 0V PP-75 Ohm
- Camera Dimensions (W x H x D): 0″ x 1.3″ x 1.3″ -inches
- Weight: 72 lbs
TECHNICAL SPECS
- Video System: PAL/NTSC Auto Switching
- LCD Screen: 36’’ TFT LCD
- Monitor Resolution: 1280 x 420 Pixels
- Brightness: 1000cd/m2
- Aspect Ratio: 16:9
- Monitor And Camera Connector: RCA connector
- AV Inputs: 3CH- AV1- Left Camera, AV2-Back Camera, AV3-Right Camera
- Micro SD Card Support: Up to 32GB, Not Included
- Power Consumption: 7W (Working) 0.5W (Standby)
- Power Supply: DC 12-24V
- Monitor Dimensions (L x W x H ): 0″ x 1.3″ x 1.26″ –inches
BACKUP CAMERA WIRING
Since the 7.36 inch mirror monitor with 3ch video input, users can connect the video camera input to the monitor V3 ch for backup.
EASY FILE SAVING & SHARING
To use the recording function, use the external dash camera mirror monitor. View the recorded video and playback output in the 7.36 inch mirror.
FAQs
Can you place a Pyle PLCMDVR77 dash cam on the rear view mirror?
They are the simplest vehicle cameras to install because you often only need to attach a rearview mirror dash cam to your existing car mirror, which can be set up in under a minute. In most cases, the mirror cam itself is where the mounting straps for the dash cam are fastened.
How does a rear view mirror Pyle PLCMDVR77 dash cam work?
It instals instantly; all you have to do is plug it into your car’s power port and fasten it over the rearview mirror. When your car begins, the HD Mirror Cam immediately switches on. You may rotate the camera 360 degrees to look at the front, back, and both.
Can you put a dash cam in rear window?
Choose a spot on the rear windshield where the camera can capture the whole rear view effectively and there is no defrost grid wire. If your car has a sunshade on the back windshield, choose a spot where utilising it won’t obstruct the camera’s functionality.
Why does my rear view mirror have a camera?
Rear Camera Mirror, if it’s an option on your car, is a camera that lets you drive with a wider, less-obstructed view of what’s behind it than you would with a standard rearview mirror. The feature also permits brightness, vertical tilt and zoom changes.
Is mirror Pyle PLCMDVR77 dash cam better?
Mirror cams are devices that attach to the rear-view mirror and record the road ahead in addition to the rear view. Many of them also have a parking aid. Although mirror cameras are more expensive than dash cameras, try to justify this given their versatility.
Where should a rear Pyle PLCMDVR77 dash cam be placed?
A dash cam must be fixed behind the rear-view mirror to guarantee it doesn’t hinder your view while catching both lanes of the road ahead. The majority of dash cams are fastened using suction cups or double-sided tape.
How important is a rear facing Pyle PLCMDVR77 dash cam?
You need a rear dash cam to record video if someone backs into the back of your car or if a hit-and-run motorist damages your car, just like while you’re driving. It’s interesting to note that several drivers have observed that when tailgaters see a rear-facing dash cam on the car in front of them, they often back off.
How do you hide rear Pyle PLCMDVR77 dash cam wires?
Under the glove box or in the driver’s wheel well, you can conceal extra wire. The extra wires should be neatly folded together and secured with a zip tie. You can conceal extra wires in the fuse box or behind the fuse box if your dash camera is hardwired.
Do Pyle PLCMDVR77 Dash cams work when car is parked?
Dash cameras can be utilized while your car is parked, yes. Your dash cam will require electricity from a hardwire installation or, if it has Intelligent parking mode, from its battery, in order to record when you’re not driving.
Can Pyle PLCMDVR77 dash cam work against you?
Yes, your dash cam film can be used against you. If you get into an automobile accident and fault is not evident, the video tape can be subpoenaed to disprove your personal injury claim. It can be beneficial to speak with your personal injury attorney as soon as possible and let them watch the footage.
Does a dash cam film when the car is off?
The cigarette lighter port in your automobile provides electricity to the majority of dash cameras. When your automobile is not operating, this is not active. Therefore, the majority of dash cameras are inoperative when your automobile is not in use. However, you can get dash cameras that provide 24/7 security.
Can a Pyle PLCMDVR77 dash cam work without being plugged in?
The majority of dash cams on the market today do require some type of wiring to draw power, despite the fact that some may advertise themselves as being wireless. There are a few dash cams that are completely powered by internal batteries, however they typically have a short recording time.
What is the best viewing angle for a Pyle PLCMDVR77 dash cam?
You might ask if, for increased safety, choosing a 160° or even 180° lens would be more advantageous. However, in real-world situations, a 150° lens is ideal because wide-angle lenses with an angle of view greater than that might distort the margins of images, rendering video useless as proof for the police or insurance.
How do I connect my Pyle PLCMDVR77 dash cam to my phone?
On your phone (an iPhone or an Android), launch the My Next base connect app, choose the “Dash Cam” button at the bottom of the screen, and then hit “Connect Dash Cam.” The serial number should match the number on the base of your Dash Cam when your Dash Cam model appears on the screen. To connect, tap this box.
Should I remove Pyle PLCMDVR77 dash cam at night?
Leaving a dash camera in your car overnight if it doesn’t have parking mode may draw unwanted attention. When that occurs, it’s crucial to keep in mind to take the object out of the windscreen as soon as you can.
How long does parking mode work on Pyle PLCMDVR77 dash cam?
The standard Parking Mode setting is Motion + Impact detection. The dash camera records for 10 seconds prior to and 10 seconds following an impact.
How do I charge my Pyle PLCMDVR77 dash cam?
Remove the SD card from the Dash Cam and bring it inside. Wait for your dash cam to cool down if it feels warm to the touch. Make careful to insert the USB cable into the camera’s body, not through the automobile mount, and then plug it into a mains power supply (2 Amp is recommended).
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>