SLOSHY B0896YLMWQ Sprinkler Whale Bath Toy User Manual

SLOSHY B0896YLMWQ Sprinkler Whale Bath Toy

Product Specifications

• Power Source: 3 x 1.5V AAA batteries
• Waterproof: Yes
• Recommended Age: Adults for battery installation, children for gameplay

Product Usage Instructions

Installing Batteries:

1. Use a Phillips screwdriver to remove the screw and battery cover at the bottom of the spray product.
2. Insert 3 new 1.5V AAA batteries, ensuring correct polarity as indicated inside the battery compartment.
3. Close the battery cover and tighten the screws to prevent leakage.
4. After use, remove the batteries and tighten the screws.

Using the Product:

Before starting the water game, ensure the surrounding area is covered to prevent damage. Once in water, the product will automatically spray water when the sensing point contacts water.

Cleaning Instructions:

1. Remove the battery cover at the bottom of the base using a screwdriver.
2. Clean the interior with a cotton swab and mild detergent if necessary, ensuring thorough drying before reassembly.
3. Tighten all screws securely to prevent any leaks.

Safety Instructions:
If the water spray does not stop, rinse the bottom of the product with clean water and dry the rubber switch.

FAQ:

• Q: What should I do if the water spray does not stop?
  A: Rinse the bottom of the product with clean water and dry the rubber switch to stop the water spray.

• Q: How should I dispose of the product?
  A: The product should not be disposed of as regular household waste. Please recycle responsibly following local guidelines or return it to the retailer for environmentally safe recycling.

Battery operation

1. Inlet hole
2. respond
3. waterproof ring

Adults must install new batteries before starting the game:

1. Use a Phillips screwdriver to remove the screw and battery cover at the bottom of the spray product.
2. Use 3 new 1.5V AAA batteries. lnstall accurately according to the positive and negative poles marked in the battery compartment.
3. Close the battery cover and tighten the 2 screws to ensure that the battery cover does not leak.
4. After the product is used, remove the battery, and tighten the 2 screws.

Product Features

Important: Before you start playing with water, please cover the surrounding area to prevent possible Cause damage. After entering the water, the electric induction spray water ball, the sensing point contacts the water, and sprays water by itself. The picture is for reference only, please refer to the actual product.

Cleaning instructions

1. Use a screwdriver to remove the screw and battery cover at the bottom of the base. When cleaning, please remove the battery to prevent the product from starting.
2. If it is necessary to clean the inside of the pump, use a cotton swab and a mild detergent. After cleaning, the interior is cleaned, and the toy is thoroughly dried.
3. Close the pump cover and tighten the screws.
4. Close the battery compartment cover and tighten the screws securely to ensure that the battery compartment cover is not dripping.

Safety instructions

• It must be supervised by an adult. To prevent drowning, children should not be left unattended when they are in the water or at the water’s edge.
• Keep your long hair away from the product during play.
• Do not let children play with water near any power source or equipment.
• When removing the water spray from the water, do not leave it near any power source or equipment.
• This spray product can only be used with clean water or water with commercial standard bath additives.
• Before storing this product, dry it with a towel and dry it in a well-ventilated place. If moisture still exists in the battery case, dry it with a towel.
• When the water spray product is picked up and the rubber switch is no longer sprayed onto the water, the water spray will stop.
  Note : If the water spray does not stop, rinse the bottom of the product with clean water and dry the rubber switch.

INSTRUCTIONS FOR RECYCLING AND DISPOSAL:
This label means that the product cannot be disposed of as other household waste throughout the EU. To prevent potential damage to the environment or human health from uncontrolled waste disposal. Recycle responsibly to promote the sustainable use of material resources. If you want to return a used device, use the drop-off and collection system, or contact the retailer from whom you bought the product. The retailer can accept the product for environmentally safe recycling.
A declaration by the manufacturer that the product complies with the requirements of the applicable EU Directives.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>