Shark FlexStyle HD400 Series Air Drying & Styling System User Manual
- June 3, 2024
- Shark
Table of Contents
Shark FlexStyle HD400 Series Air Drying & Styling System User Manual
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety precautions should always be followed, including the following:
FOR HOUSEHOLD USE ONLY
READ ALL INSTRUCTIONS BEFORE USING—SAVE THESE INSTRUCTIONS
WARNINGS: KEEP AWAY FROM WATER DANGER—
As with most electrical appliances, electrical parts are electrically live
even when the switch is off.
WARNING:
To reduce the risk of death by electric shock:
1. A lways unplug the unit immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it can fall or be pulled into a tub
or sink.
4. Do not place in or drop into water or other liquid.
5. I f an appliance falls into water, unplug the unit immediately. Do not
reach into the water.
WARNING:
To reduce the risk of burns, electrocution, fire, or injury to persons:
1. A n appliance should never be left unattended when plugged in.
2. Close supervision is necessary when this appliance is used by, on, or near
children or individuals with certain disabilities.
3. Use this appliance only for its intended use as described in this manual.
Do not use attachments not recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is
not working properly, or if it has been dropped, damaged, or dropped into
water.
5. Keep the cord away from heated surfaces.
6. Do not wrap the cord around the appliance.
7. Never block the air openings of the appliance or place it on a soft
surface, such as a bed or couch, where the air openings may be blocked. Keep
the air openings free of lint, hair, and the like.
8. Never use while sleeping.
9. Never drop or insert any object into any opening.
10. Do not use outdoors or operate where aerosol (spray) products are being
used or where oxygen is being administered.
11. Do not use an extension cord with this appliance.
12. Do not direct hot air toward eyes or other heat-sensitive areas.
13. Attachments may be hot during use. Allow them to cool before handling.
14. Do not place appliance on any surface while it is operating.
15. While using the appliance, keep your hair away from the air inlets.
16. Do not operate with a voltage converter.
SAVE THESE INSTRUCTIONS
For accessories and replacement parts, visit sharkclean.com/accessories
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz | Power: 1300 Watts
SCAN QR CODE FOR FULL INSTRUCTIONS, WARRANTY INFORMATION, AND HOW-TOS
© 2022 Shark Ninja Operating LLC. SHARK FLEXSTYLE is a trademark of SharkNinja Operating LLC. HD400_Series_Warning_Insert_E_F_S_MP_Mv3
OPERATING INSTRUCTIONS
1. Turn the styler on and off.
2. Adjust the airflow. Pressing the button allows you to choose a low,
medium, or high airflow.
3. Adjust the temperature. Pressing the button
allows you to choose no heat, low, medium or high temperature.
4. Press and hold the Cool Shot button for a cool burst of air to set your
style.
5. To attach any accessories included with your model, press them into the
nozzle outlet. You will know they are properly attached when they click in
place.
6. To remove any accessories included in your model, slide the lock down and
lift the accessory off of the nozzle by holding onto the touchpoints
identified in your Style Guide.
7. To change from styling wand mode to hair dryer mode, slide down the lock
and rotate the nozzle left. Keep rotating the nozzle until it clicks into
place in hair dryer mode. To change from hair dryer mode to styling wand mode,
slide down the lock and rotate the nozzle right.
8. Press the ALCI button to rest the dryer. See Troubleshooting & Error Codes
for more information.
For further operating instructions, please consult the Styling Guide or scan the QR code.
Storage, Cord Safety, and Maintenance/Cleaning:
- Ensure the cord is not knotted, twisted, or wrapped around any nearby objects when in use.
- Store the unit in a dry location away from water and other heat sources.
- Regularly clean the filer at the bottom of the unit. To clean the filter, first slide the filter cover off the bottom of the unit. Then use a new toothbrush to brush off any dust or debris on the filter. Once the filter is clean, slide the filter cover back on the unit until it clicks in place.
MAINTENANCE/CLEANING
Reduction in Airflow or Overheating
A change in airflow or air power, airflow blockages, and/or visible buildup on
the inlet at the bottom of the unit indicates your unit needs to be cleaned.
We recommend using a new toothbrush to clean off the filter at the bottom of
the unit.
ALCI OPERATION
Electricity flickers or trips circuit breaker during use.
This dryer is equipped with an Appliance Leakage Circuit Interrupter (ALCI), a
safety feature that renders it inoperable under abnormal conditions. Should
the dryer turn off in use, press the red Reset button on the plug and the
dryer should function normally. If the dryer does not reset, please check your
circuit breaker. If the issue persists, ensure there are no other appliances
plugged in within the room where the dryer is being used. Do not use the dryer
with a power strip.
OVERHEATING
Hair dryer is overheating or shuts off.
This unit is equipped with a temperature-protective thermostat. If for some
reason your hair dryer overheats, the thermostat will automatically turn the
unit off. To prevent power-down recurrence, unplug the hair dryer and set it
aside to cool, or cool down using the cool shot button during use. Overheating
may result if the unit is powered on for a long duration, or can indicate a
blockage or dust buildup. We recommend using a new toothbrush to clean off the
filter at the bottom of the unit. If overheating continues to occur, contact
Customer Service at 855-522-0912.
TWO (2) YEAR LIMITED WARRANTY
The Two (2) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of two (2) years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable parts deemed defective, in
SharkNinja’s sole discretion, will be repaired or replaced up to two (2) years
from the original purchase date.
2. I n the event a replacement unit is issued, the warranty coverage ends six
(6) months following the receipt date of the replacement unit or the remainder
of the existing warranty, whichever is later. SharkNinja reserves the right to
replace the unit with one of equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of wearable parts (such as accessories), which
require regular maintenance and/or replacement to ensure the proper
functioning of your unit, are not covered by this warranty. Replacement parts
are available for purchase at sharkclean.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform
required maintenance (e.g., failure to keep the well of the motor base clear
of food spills and other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These
defects include damages caused in the process of shipping, altering, or
repairing the SharkNinja product (or any of its parts) when the repair is
performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal
household conditions within the warranty period, visit sharkbeauty.com for
product care and maintenance self-help. Our Customer Service Specialists are
also available at 855-522-0912 to
assist with product support and warranty service options, including the
possibility of upgrading to our VIP warranty service options for select
product categories. So we may better assist you, please register your product
online at registeryourshark.com and have the
product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for
repair or replacement. A fee of $20.95 (subject to change) will be charged
when SharkNinja ships the repaired or replacement unit.
How to initiate a warranty claim
You must call 855-522-0912 to initiate
a warranty claim.
You will need the receipt as proof of purchase. We also ask that you register
your product online at registeryourshark. com and have the product on hand
when you call, so we may better assist you. A Customer Service Specialist will
provide you with return and packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other
rights that vary from state to state. Some states do not permit the exclusion
or limitation of incidental or consequential damages, so the above may not
apply to you.
FCC WARNINGS
This unit has been tested and found to comply with FCC limits for Class B
digital devices. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This unit generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this unit may not cause harmful interference, and this unit must accept any interference received, including interference that may cause undesired operation.
To see if this unit interferes with radio or television reception, try turning it off and on.
To correct any interference:
1. Reorient or relocate the receiving antenna.
2. Increase the distance between the unit and the receiver.
3. Connect the unit to a different outlet than the receiver.
4. Consult the dealer or an experienced technician for help.
Caution: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate it.
FAQs
This article contains the FAQs for the HD400 Series Shark FlexStyle™ Air Styling & Drying System. This supports the following SKUs: HD400, HD410, HD420, HD430, HD430C, HD435 and HD440.
Hair Dryer questions
What is the button on the middle of the handle with the blue dot?
This is the Cool Shot button. When you hold it down, it turns off the heater
and blows room-temperature air. This helps close the cuticle and smooth the
hair at the end of styling.
Use the Cool Shot button to finish the style. When diffusing curls or when
using the curlers, press and hold the Cool Shot button for 10 seconds to help
lock in your style and set the shape of your curls or waves. To tame frizz
using the Concentrator or Styling Brush accessories, press and hold the Cool
Shot button while moving downward from roots to ends. To shape ends using the
Concentrator or Styling Brush accessories, wrap the ends of your hair around a
round brush or around the bristles on the Styling Brush and hold the Cool Shot
button for 10 seconds.
How do I know if the Cool Shot button is activated?
To engage Cool Shot, you must press the button and hold it down. The Cool Shot
ends when the button is released. When the Cool Shot button is held down, you
should feel the air turn from warm to room temperature in a few seconds, and
the red LEDs will turn off. When you release the button, the temperature will
return to the prior setting.
How do I switch between styling wand mode to hair dryer mode?
To change to hair dryer mode, slide down the hinge latch button on the back of
the hair dryer and rotate the nozzle left until it clicks. (The nozzle is
unlocked when the hinge latch button is held in the down position.) To change
back to styling wand mode, slide the hinge latch button down and rotate the
nozzle back up until it clicks into place.
There is dust buildup on the filter on the bottom of the hair dryer. How do I clean it?
Slide the filter cover off of the bottom of the unit, then use a new
toothbrush to clean any built-up dust off the filter. Slide the filter cover
back on the bottom of the hair dryer before using the hair dryer again. We
recommend cleaning the filter monthly to help maintain unit performance.
e.
My hair dryer is hot after use. How do I cool it down?
Try holding down the Cool Shot button for at least 10 seconds before turning
off your hair dryer after styling to help cool it down.
Can I use the hair dryer outside North America?
This hair dryer has been designed for North American homes. Using it in other countries is not recommended and will void your warranty.
How can I help maintain my unit’s performance?
Make sure not to cover the filter at the bottom with your hand. This will
block the air inlet, and will cause a reduction in performance and can lead to
overheating. We also recommend cleaning the filter monthly to help maintain
unit performance. Slide the filter cover off of the bottom of the unit, then
use a new toothbrush to clean any built-up dust off the filter. Slide the
filter cover back on the bottom of the hair dryer before using the hair dryer
again.
video
The noise of the hair dryer seems to be getting worse over time. How do I fix it?
This could be a sign that your hair dryer needs to be cleaned. Slide the filter cover off the bottom of the unit and use a new toothbrush to clean any builtup dust off the filter. Slide the filter cover back into place before using the hair dryer again. We recommend cleaning the filter monthly to help maintain performance.
The hair dryer keeps overheating. How do I prevent this?
This could be a sign that your hair dryer needs to be cleaned. Slide the filter cover off the bottom of the unit and use a new toothbrush to clean any builtup dust off the filter. Slide the filter cover back into place before using the hair dryer again. We recommend cleaning the filter monthly to help maintain performance and help prevent overheating. This may also happen if the dryer has been operated for a long time without cooling. Set the dryer aside to cool, or cool the unit by using the Cool Shot button. Make sure not to cover the filter with your hand when using the hair dryer, since that can cause the unit to overheat.
My hair dryer will not turn on. How do I fix it?
Press the reset button on the plug. If the dryer still will not turn on, check
the circuit breaker.
Failure to turn on can also be due to overheating. If your hair dryer powers
off during use, allow it to cool for 30 minutes before trying again.
Auto-Wrap Curlers questions
How and when should I use the Auto-Wrap Curlers?
Attach the Auto-Wrap Curlers to create waves or curls with less heat. The
Auto-Wrap Curlers use air to wrap your slightly damp hair around the barrel
and dry it in place. Reference your style guide and how-to videos to learn how
to properly use the Auto-Wrap Curlers.
What are the recommended settings for the Auto-Wrap Curlers?
The recommended settings for the Auto-Wrap Curlers are high heat and high airflow.
The Auto-Wrap Curler keeps falling off. How do I keep it connected?
Make sure the Auto-Wrap Curler you are using is fully clicked into place before use. You will know the Auto-Wrap Curler is locked in when you hear or feel a click, and when the styler lock is positioned at the top of its slot. If needed, twist the Auto-Wrap Curler clockwise slightly as you push it on. If the Auto-Wrap Curler still falls off before or during use, please call a customer service representative for additional assistance.
I have straight or wavy hair. How do I make my curls last longer?
• Prep your hair for curling by adding lightweight products such as a curl-
creating serum, curl mousse, or a texture spray made for your hair type.
• Make sure your hair is slightly damp (80 to 90% dry) before curling.
• Use the high heat and high flow settings.
• Keep your hair on the barrel using high heat, high airflow for 10 seconds.
• Before removing your hair from the barrel, press and hold the Cool Shot
button for 10 seconds.
• Repeat high heat, high airflow for 10 seconds and Cool Shot for 10 seconds
until hair is completely dry.
• Roll each curl up to your roots and pin it in place while you continue to
style the rest of your hair. Keep the curls pinned until they are fully
cooled.
• Allow curls to cool completely before running your fingers through them.
• Use a setting or holding spray after you create each curl.
Follow the link below to veiw our How to video:
Hair Styler | Tips for Curl Longevity, Straight and Wavy Hair (Shark
FlexStyle™)
I have curly or coily hair. How do I make my curls last longer?
• Prep your hair for curling by adding lightweight products such as a curl-
creating serum, curl mousse, or a texture spray made for your hair type.
• We recommend using the Paddle Brush or Oval Brush to dry, smooth and stretch
your hair until it is slightly damp (80 to 90% dry) before curling.
• Use the high heat and high flow settings.
• Keep your hair on the barrel using high heat, high airflow for 10 seconds.
• Before removing your hair from the barrel, press and hold the Cool Shot
button for 10 seconds.
• Repeat high heat, high airflow for 10 seconds and Cool Shot for 10 seconds
until hair is completely dry.
• Allow curls to cool completely before running your fingers through them.
• Use a setting or holding spray after you create each curl.
Follow the link below to veiw our How to video:
Hair Styler | Tips for Curl Longevity, Curly Hair (Shark FlexStyle™
)
My curls come out in tight ringlets. How do I get a Soft curl?
Depending on your hair type, your hair may come off the barrel in a ringlet.
Before breaking up the curl, we recommend using a hold spray. Once the hair is
fully cooled and sprayed, rake your fingers through the ringlet to break it up
into a wave.
Follow the link below to veiw our How to video:
Hair Styler | Soft Curls for Straight
Hair
Hair Styler | Soft Curls for Wavy Hair
Hair Styler | Soft Curls for Curly
Hair
How do I change the curl direction?
There are 2 curling barrels included in your model. The left barrel curls your hair in a clockwise direction, while the right barrel curls in a counterclockwise direction. To change the direction of your curls, simply switch barrels.
How do I create more consistent curls?
Make sure you are taking sections that are the same size. (For example, if you
find 1-inch sections work best for your hair type, make sure every section you
take is a 1-inch section.) Make sure to take sections that are square at the
root. The hair in each section you take should be all the same length.
How can I tell what direction the curls will be created?
Reference the image from your style guide for information about which Auto-
Wrap Curler is recommended for each side of your head so the curls you create
go away from your face. The left barrel has an L printed on top, and the right
barrel has an R on top.
The left barrel will create counterclockwise curls, and the right barrel will
create clockwise curls.
I’m having trouble wrapping my hair around the barrel. What can I do?
• Try taking a smaller section of hair to wrap.
• Test out different moisture levels with your hair. Different hair types may
require more or less moisture for optimal curling.
• Try holding your hair section closer to or farther from the ends, for better
pickup and wrap.
• Make sure to bring the barrel behind the ends of your hair section so that
the tips will automatically wrap around the middle of the barrel.
I keep getting unwanted hair wrapped around the Auto-Wrap Curler barrel. How do I prevent this?
Use sectioning clips or hair ties to prevent unwanted hair from being wrapped around the barrel.
Do you have any tips for short hair?
Manually wrap a half-inch-to-1-inch section of hair around the barrel and hold
it in place the way you would with a traditional hot curling wand. Turn on the
styling wand while still holding your hair on the barrel. Hold hair in place
for 10 seconds, then press and hold the Cool Shot button for 10 seconds to set
your style. Repeat until your hair is completely dry. Turn off the styling
wand, let go of your hair section, and reveal your curl!
You can also try holding the styling wand horizontally for a tighter curl
around the barrel.
Do you have any tips for long hair?
• Try holding smaller sections of hair so more hair is able to wrap around the
barrel.
• Hold the barrel horizontally so more hair will stay on.
How can I get a tighter curl?
• Try holding a smaller section of hair.
• Hold the styling wand horizontally when curling instead of vertically.
• After your hair has started to wrap, create tension around the barrel by
pulsing the barrel towards and away from your face as you bring it in towards
your roots. The pulses will wrap your hair tighter around the barrel, which
will help create a tighter curl.
Oval Brush questions
How and when should I use the Oval Brush?
Attach this styler to the hair dryer and use it on all hair types to dry, smooth, defrizz, and add volume—all at the same time. Smoothing bristles enable grabbing, smoothing, and shining, while detangling bristles enable combing and detangling. Best for straight, wavy, curly, or coily hair.
What are the recommended settings for the Oval Brush?
The recommended settings for the Oval Brush are medium heat and medium airflow.
My brush keeps falling off. How do I keep it connected?
Make sure the Oval Brush is fully clicked into place before use. You will know the Oval Brush is locked in when you hear or feel a click, and when the styler lock is positioned at the top of its slot. If needed, twist the Oval Brush clockwise slightly as you push it on. If the Oval Brush still falls off before or during use, please call a customer service representative for additional assistance.
What material are the bristles made of?
The Oval Brush has two types of bristles. One type is a high-heat-capacity nylon, and the other is boar. The nylon bristles are larger and help in combing and detangling, while drying at the same time. The boar bristles are sourced from a natural material that promotes grabbing, smoothing, and shining, while seamlessly distributing your hair’s natural oils.
How do I prevent frizz when using the brush?
If you find that you get frizz when using the brush, decrease the airflow. If you still get some frizz, finish styling by brushing down the outside of the hair and pulling the hair through the boar bristles, then use Cool Shot to relax the cuticle. Try using hair products made for your hair type that help to reduce frizz before and after styling.
Do you have any tips for fine hair?
Try reducing the airflow to help reduce frizz and improve smoothing. This will also help you to have better control over your styling. Use hair products made for your hair type that help to reduce frizz before and after styling.
Do you have any tips for thick hair?
Brush smaller sections of hair to allow the smoothing bristles to better grip
your hair and create a smoother style.
Increase the heat and airflow to create a straighter style and to speed up
your styling.
Do you have any tips for curly or coily hair?
Brush smaller sections of hair to allow the smoothing bristles to better grip
your hair and create a smoother style.
Increase the heat and airflow to create a straighter style and to speed up
your styling.
Use hair products that help to straighten or stretch your hair before styling.
Do you have any tips for long hair?
Try taking smaller sections of hair so you have better control during styling. This can also help minimize frizz and improve smoothing.
Do you have any tips for short hair?
Try reducing the airflow to help minimize frizz and improve smoothing. This will also help you to have better control over your styling.
Paddle Brush questions
How and when should I use the Paddle Brush?
Use on all hair types to dry, smooth, defrizz, and straighten—all at the same
time. Smoothing bristles enable grabbing, smoothing, and shining, while
detangling bristles enable combing and detangling. Best for straight, wavy,
curly, or coily hair.
What are the recommended settings for the Paddle Brush?
The recommended settings for the Paddle Brush are medium heat and high airflow.
The Paddle Brush keeps falling off. How do I keep it connected?
Make sure the Paddle Brush is fully clicked into place before use. You will know the brush is locked in when you hear or feel a click, and when the styler lock is positioned at the top of its slot. If needed, twist the Paddle Brush slightly as you push it on. If the Paddle Brush still falls off before or during use, please call a customer service representative for additional assistance.
What material are the bristles made of?
The Paddle Brush has two types of bristles. One is a high-heat-capacity nylon, and the other is boar. The nylon bristles are larger and help in combing and detangling, while drying at the same time. The boar bristles are sourced from a natural material that promotes grabbing, smoothing, and shining, while seamlessly distributing your hair’s natural oils.
How do I prevent frizz when using the Paddle Brush?
If you get frizz when using the brush, decrease the airflow. If you still get some frizz, finish styling by brushing down the outside of the hair and pulling the hair through the boar bristles, then use Cool Shot to relax the cuticle. Use hair products made for your hair type that help to reduce frizz before and after styling.
How to I access my roots and build volume?
Split your hair into smaller sections for better root access. Place the brush
under the section of hair and brush in an upward motion to help build volume
at the roots.
Hold the brush at the root for 3 to 5 seconds before pulling it through the
hair for even more volume.
Do you have any tips for fine hair?
Try reducing the airflow to help minimize frizz and improve smoothing. This
will also help you to have better control over your styling.
Use hair products that help to reduce frizz before and after styling.
Do you have any tips for thick hair?
Try brushing smaller sections of hair to allow the smoothing bristles to
better grip your hair and create a smoother style.
Increase the heat and airflow to create a straighter style and to speed up
your styling.
Do you have any tips for curly or coily hair?
Brush smaller sections of hair to allow the smoothing bristles to better grip
your hair and create a smoother style.
Increase the heat and airflow to create a straighter style and to speed up
your styling.
Use hair products that help to straighten or stretch your hair before styling.
Do you have any tips for long hair?
Try taking smaller sections of hair so you have better control during styling. This can also help minimize frizz and improve smoothing.
Do you have any tips for short hair?
Try reducing the airflow to help minimize frizz and improve smoothing. This will also help you to have better control over your styling.
Can I use the Paddle Brush on my coily hair?
The Paddle Brush can be used to stretch and lengthen coily hair to prep it for curling or additional styling. You can also use the Paddle Brush to stretch and lengthen hair for an everyday look.
Curl-Defining Diffuser questions
How and when should I use the Curl-Defining Diffuser?
Attach the Curl-Defining Diffuser for fast, consistent drying from root to tip. To enable curl perfection, our Curl-Defining Diffuser features retractable and extendable prongs. Retract the prongs for shorter, finer hair and less heat on the scalp. Extend the prongs for longer, thicker hair and to reach and lift at the root. Best for wavy, curly, and coily hair.
What are the recommended settings for the Curl-Defining Diffuser?
The recommended settings for the Curl-Defining Diffuser are low heat and low airflow.
Why do the prongs extend on the Curl-Defining Diffuser? When should I use each mode?
The prongs on the Curl-Defining Diffuser extend and retract to allow a customized diffusing experience. Slide the lever left or right to extend or retract. Extend the prongs for very thick, long, or coarse hair. They help reach the roots, and will help if you have a difficult time drying them. Retract the prongs for shorter or finer hair, or when you only want to dry the ends.
The Curl-Defining Diffuser keeps falling off. How do I keep it connected?
Make sure the Curl-Defining Diffuser is fully clicked into place before use. You will know it is locked in when you hear or feel a click, and when the styler lock is positioned at the top of its slot. If needed, twist the Diffuser slightly as you push it on. If the Diffuser still falls off before or during use, please call a customer service representative for additional assistance.
How do I help prevent frizz when using the Curl-Defining Diffuser?
Apply curly hair products such a leave-in conditioner or curl-defining cream
to wet hair before drying to help define your curls and prevent frizz.
Make sure you are using the Curl-Defining Diffuser on the lowest airflow
setting to help prevent frizz.
Do you have any tips for thick hair?
Try increasing the heat to help speed up the dry time for thicker hair.
Is the Shark FlexStyle™ Air Drying and Styling Curl-Defining Diffuser compatible with any other hair dryer?
The Shark FlexStyle™ Air Drying and Styling Curl-Defining Diffuser is not compatible with any other hair dryers including the Shark HyperAir™.
Styling Concentrator questions
How and when should I use the Styling Concentrator?
Attach the Styling Concentrator to dry and style in fewer steps. The Styling Concentrator rotates, so airflow is always in line with your round brush. Use the airpath for a quick, all-over dry, then finish with a round brush for smoothing, shaping, and bending. Best for straight, wavy, curly, and coily hair.
The Styling Concentrator keeps falling off. How do I keep it connected?
Make sure the Styling Concentrator is fully clicked into place before use. You will know the concentrator is locked in when you hear or feel a click, and when the styler lock is positioned at the top of its slot. If needed, twist the Styling Concentrator slightly as you push it on. If the Styling Concentrator still falls off before or during use, please call a customer service representative for additional assistance.
Do you have any tips for fine hair?
Try reducing the airflow to help minimize frizz and improve smoothing. This will also help you to have better control over your styling. Use hair products made for your hair type that help to reduce frizz before and after styling.
How can I add a bit of a curl when styling with the Styling Concentrator?
Wrap your hair around a round brush and dry it in place using the Styling Concentrator.
How can I build volume using the Styling Concentrator?
Place a round brush under the roots and brush upward while drying with the Styling Concentrator.
Product Specifications
What is the Wattage?
1300 Watts
What is the Voltage?
120 volts
What is the cord length?
The cord is 8 feet long
What is the weight?
1.54 lbs
What are the dimensions?
1.8″(L)x1.8″(W)x13.5″(H)