Shark HyperAIR HD102 Series Style Guide

Shark HyperAIR HD102 Series Style Guide

Get to know your Shark HyperAir Dryer & IQ Stylers.

How it works

TIP: Press and hold Cool Shot as desired to lock in your style.
All 3 red temp lights will be OFF when Cool Shot is engaged.

What’s in the box?

STYLING WITH THE SYSTEM

When an Styler is attached, Shark™ HyperAir intelligently sets the ideal heat and airflow settings for fast, healthy styling.
The IQ logo on the back of the dryer will illuminate when a Styler is properly attached.

Did you know? You can adjust our recommended temperature or airflow settings to experiment with different results or to follow your normal routine.

Get to know your 2-in-1 Concentrator

IQ 2-in-1 Concentrator

How to finesse your flow

Press the IQ 2-in-1 Concentrator into the head of the hair dryer until it clicks into place.

START WITH TOWEL-DRIED HAIR.
Apply hair products or styling agents as desired.

1. Gentle-dry with the nozzle retracted, applying airflow from roots to ends.

2. When excess moisture is gone, extend nozzle and start styling with a round brush. Slide the lever to move from pre-styling mode to precision styling mode.
Rotate the concentrator so airflow is always in line with the round brush.

3. Apply heat in a downward motion for smoothing. Apply heat at ends for shaping and bending.

4. Finish styling by setting shape at ends with Cool Shot.

Do you love your Shark HyperAir Dryer &  IQ Stylers?

Shop our other Stylers for more styling options. To expand your Shark™ HyperAIR System, scan the QR code.

Get to know your IQ Styling Brush

IQ Styling Brush

Dry, straighten, and shine—all at the same time.

TIP: Press and hold Cool Shot as desired to lock in your style.
All 3 red temp lights will be OFF when Cool Shot is engaged.

Steps to the smoothest blowout

Press the IQ Styling Brush in horizontal position into the head of the hair dryer until it clicks into place.

START WITH TOWEL-DRIED, DETANGLED HAIR.

Apply hair products or styling agents as desired.

1. Loose-dry by pulling the brush through hair with the Detangling Bristles. Pull through to ends.

2. Press the iQ 360˚ button, then turn brush vertically as desired to maximize reach to the back of your head.
Pro Tip: Section hair as desired, drying underneath first to build volume at the crown.

3. For smoothing and shining, brush from top to bottom. Use a rounding motion to engage the Smoothing Bristles and grab hair.
Pro Tip: Toggle to low airflow and hold ends around bristles. Set shape by pressing the Cool Shot button.

4. For volume and shape, scoop from underneath the roots.
Pro Tip: Toggle to low airflow and hold ends around bristles. Set shape by pressing the Cool Shot button.

Get to know your IQ Curl-Defining Diffuser

IQ Curl-Defining Diffuser

Fast, even drying from root to tip.

TIP: Press and hold Cool Shot as desired to lock in your style.
All 3 red temp lights will be OFF when Cool Shot is engaged.

Bring the bounce

Press the IQ Curl-Defining Diffuser into the head of the hair dryer  until it clicks into place.

START WITH TOWEL-DRIED, DETANGLED HAIR.

Apply hair products or styling agents as desired.

1. Working around your head, bunch curls from ends between the petals of the diffuser, bringing it up to the roots for even drying.

2. Rotate the diffuser back and forth, reaching up to roots. Pause and hold.

3. If desired for more volume, extend prongs to lift roots higher.
Pro Tip: Gather hair in diffuser with prongs retracted, then extend them when you reach the roots to increase grab and maximize flow.

4. If desired, flip upside down and bunch from below.
Keep the integrity of your natural curls by switching between low temp and the Cool Shot button.

Get to know your IQ AirWave

IQ AirWave

Long-lasting waves with less heat.

TIP: Press and hold Cool Shot as desired to lock in your style.
All 3 red temp lights will be OFF when Cool Shot is engaged.

Master the best beach waves

Press the IQ AirWave into the head of the hair dryer until it clicks into place.

PREP YOUR HAIR BY LEAVING A LITTLE MOISTURE BEHIND AFTER DRYING WITH YOUR SHARK™ HYPERAIR.

For curly hair types, we recommend smoothing and drying with the IQ Styling Brush. Avoid using the AirWave on flat-ironed hair.

1. Begin with mostly dry hair. Select wave direction by turning the lever according to the graphic below.

2. Section hair in 1- to 2-inch sections.
Use small sections that are even and square at the root.
Pro Tip: Try different-sized sections to find your favorite wave.

3. Turn on the hair dryer. Place section of hair into the AirWave opening.
Guide slowly, lifting it up to the root.

4. Hold AirWave upward for 20 seconds, for the best results. Then press Cool
Shot to set your style. Slowly pull styler away from hair to expose the wave.
Pro Tip: Use setting or holding spray as desired.

Looking for more inspiration, tips, and tricks?

Go to sharkbeauty.com or scan QR code.

HD102_StyleGuide_EN-SP_MP_Mv3
© 2021 Shark Ninja Operating LLC.
SHARK is a trademark of SharkNinja Operating LLC.
For accessories and replacement parts, visit sharkbeauty.com/accessories

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>