Shark HyperAIR HD100 Series Instruction Manual
- June 3, 2024
- Shark
Table of Contents
Shark HyperAIR HD100 Series Instruction Manual
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING—SAVE THESE INSTRUCTIONS
KEEP AWAY FROM WATER
DANGER— As with most electrical appliances, electrical parts are
electrically live even when the switch is off:
To reduce the risk of death by electric shock:
1. A lways unplug the unit immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it can fall or be pulled into a tub
or sink.
4. Do not place in or drop into water or other liquid.
5. I f an appliance falls into water, unplug the unit immediately. Do not
reach into the water.
WARNING—To reduce the risk of burns, electrocution, fire, or injury to persons:
1. A n appliance should never be left unattended when plugged in.
2. Close supervision is necessary when this appliance is used by, on, or near
children or individuals with certain disabilities.
3. Use this appliance only for its intended use as described in this manual.
Do not use attachments not recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is
not working properly, or if it has been dropped, damaged, or dropped into
water.
5. Keep the cord away from heated surfaces. Do not wrap the cord around the
appliance.
6. Never block the air openings of the appliance or place it on a soft
surface, such as a bed or couch, where the air openings may be blocked. Keep
the air openings free of lint, hair, and the like.
7. Never use while sleeping.
8. Never drop or insert any object into any opening or hose.
9. Do not use outdoors or operate where aerosol (spray) products are being
used or where oxygen is being administered.
10. Do not use an extension cord with this appliance.
11. Do not direct hot air toward eyes or other heat-sensitive areas.
12. Attachments may be hot during use. Allow them to cool before handling.
13. Do not place appliance on any surface while it is operating.
14. While using the appliance, keep your hair away from the air inlets.
15. Do not operate with a voltage converter.
SAVE THESE INSTRUCTIONS
For accessories and replacement parts,
visit sharkbeauty.com/accessories
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz | Power: 1680 Watts
SCAN QR CODE FOR FULL INSTRUCTIONS, WARRANTY INFORMATION, AND HOW-TOS
© 2021 Shark Ninja Operating LLC. SHARK is a trademark of SharkNinja Operating LLC. HD100_Series_Warning_Insert_E_F_S_MP_Mv5
OPERATING INSTRUCTIONS
1. Turn the dryer on and off.
2. Adjust the airflow. pressing the left-hand button allows you to choose a
low, medium, or high airflow.
3. Adjust the temperature. Pressing the right-hand button allows you to
choose a low, medium, or high temperature.
4. To attach any accessories included with your model, press them into place
on the front of the dryer. You will know they are properly attached if the IQ
logo on the back of the dryer illuminates when the dryer is turned on.
5. Press and hold the Cool Shot button for a cool burst of air to set your
style.
6. Press the ALCI button to reset the dryer.
See Troubleshooting & Error Codes for more information.
For further operating instructions, please consult the Styling Guide or scan the QR code.
Storage, Cord Safety, and Maintenance/Cleaning:
- Ensure the cord is not knotted, twisted, or wrapped around any nearby objects when in use.
- To store the dryer when not in use, wrap the cord in a circle and use the Velcro cord tag to secure the cord in place.
- Use the Small Cleaning Brush included in the box at purchase as needed.
TROUBLESHOOTING & ERROR CODES
MAINTENANCE/CLEANING
Reduction in Airflow or Overheating
A change in airflow or air power, airflow blockages, overheating, and/or
visible buildup on the back of the unit indicates your hair dryer needs to be
cleaned. We recommend using the Small Cleaning Brush included with your
purchase to clean off the back of the hair dryer.
ALCI OPERATION
Electricity flickers or trips circuit breaker during use.
This dryer is equipped with an Appliance Leakage Circuit Interrupter (ALCI), a
safety feature that renders it inoperable under abnormal conditions. Should
the dryer turn off in use, press the red Reset button on the plug and the
dryer should function normally. If the dryer does not reset, please check your
circuit breaker. If the issue persists, ensure there are no other appliances
plugged in within the room where the dryer is being used. Do not use the dryer
with a power strip.
OVERHEATING
Hair dryer is overheating or shuts off.
This unit is equipped with a temperature-protective thermostat. If for some
reason your hair dryer overheats, the thermostat will automatically turn the
unit off. To prevent power-down recurrence, unplug the hair dryer and set it
aside to cool, or cool down using the cool shot button during use. Overheating
may result if the unit is powered on for a long duration, or can indicate a
blockage or dust buildup. We recommend using the Small Cleaning Brush included
with your purchase to clean off the back of your unit. If overheating
continues to occur, contact Customer Service at
855-522-0912.
If you are experiencing a different error code,
please scan the QR code for additional troubleshooting or contact Customer
Service at 855-522-0912.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>