Shark S1000 Series Steam Mop Quick Start Guide
- June 3, 2024
- Shark
Table of Contents
Shark S1000 Series Steam Mop Quick Start Guide
QUICK START GUIDE
WHAT’S INSIDE
A. Steam Mop Handle
B. Steam Mop Pole
C. Steam Mop Body
D. Water Tank
E. Water Tank Cap
F. Dirt Grip™ Pad x 2
G. Mop Head
ASSEMBLY
1. Align the Mop Handle and Mop Pole so the arrow symbols inside them face forward. Insert either end of the pole into the handle until it clicks securely into place.
2. Align the Mop Pole and the Mop Body so their arrow symbols face forward. Insert the pole into the top of the mop body, sliding it in until it clicks into place.
3. Place the Dirt Grip™ cleaning pad on the floor with the quick fastener strips facing up. Align the mop head directly over the pad, then press the mop head down onto the pad. The quick fastener strips will secure the pad to the mop head.
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
FILLING THE WATER TANK
1. T o remove the water tank, lift it up and away from the Steam Mop body.
2. R emove the water tank cap by twisting counterclockwise. Fill tank completely with distilled water or tap water.
3. Place the cap on the water tank and twist clockwise to seal. To replace the water tank, align it so the cap faces down. Place the cap into the hole in the Steam Mop body and slide tank down until it clicks securely into place.
USING THE STEAM MOP
1. Pull and twist the quick release cord holder to unwrap the power cord completely. When Steam Mop is plugged into an electrical outlet, the power light will illuminate.
2. After 30 seconds, pump the handle a few times in a downward motion to prime the mop and activate steam.
3. M op with a forward and backward motion to automatically customize steam output.
For questions or to register your product, contact us at 1-800-798-7398 or visit us online at sharkclean.com
Social Media @sharkcleaning
Note: Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.