polyga HDI Compact USB User Guide
- June 3, 2024
- polyga
Table of Contents
polyga HDI Compact USB
DOWNLOAD FLEXSCAN3D
Log in to our website at https://www.polyga.com/my-account/ to download and install FlexScan3D.
CONNECT YOUR SCANNER
Plug in the power (12 VDC) and the USB cable into the scanner and your computer. Turn the scanner on.
ADD YOUR SCANNER
Start FlexScan3D. Under the Scanners tab, select New to add a scanner. Select your Scanner Type and click OK. Select the Project tab to begin scanning.
NOTE: Always power down the scanner before removing cables from the scanner.
Got questions? Contact support@polyga.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>