VGC VR-N7500 50W Dual Band Mobile Radio with APP Programming User Manual

: June 3, 2024
: VGC

Table of Contents

Section I: How To Connect VR-N7500 With Cell-phone
Section II: How To Connect to Bluetooth Accessories?
Section III: How To Edit the frequency？
**Section Ⅳ: Frequency display
Section V： Create an internet channel（For Android only）
Section Ⅵ：Bind network channel （For Android only）
Section Ⅶ：Turn on the Network repeater function （For Android only）
Section Ⅷ：Turn off the radio after pairing
Section Ⅸ：Turn on/off signal TONE
Section Ⅹ: Turn on the audio relay
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VR-N7500 50W Dual Band Mobile Radio with APP Programming
User Manual

Section I: How To Connect VR-N7500 With Cell-phone

For Android users, Go to Google Play download, Search “HT”, and the icon as the right photo. Scan the QR code to download the HT APP or visit the website: http://www.vgc.net.cn/download/22-en.html For IOS user
Search ‘BS HT’ in the APPLE store to download
Open the app, and select-[BIND NEW DEVICE]. Turn on the mobile radio, then press the POWER key twice,
a ‘BEEP’ will be heard and red-green light flashing means the radio is now in pairing status
Select the scanned device then bind it
Some mobile phone Bluetooth pairing requires authorization, so check the phone menu, MUST select to confirm Bluetooth pairing can be paired successfully.

Hand microphone status description:
【M buttons】
Short press： Channel/Volume switch
Double press： switch the A/B band. Press 【M】and 【OK】key to Restore.
【Up/Down button】
Short press：
Channel mode： Channel adjust
Volume mode： Volume adjust
【OK button】
Short press： Current channel prompts
Long press： Talk around function
Double press： Transmit 1750Hz
【PTT button】
Push to talk

Section II: How To Connect to Bluetooth Accessories?

Connect to Bluetooth PTT
Turn on the mobile radio, then press【 POWER】 key twice, and a ‘BEEP’ will be heard. Long press the Bluetooth PTT, red-green light flashing means the Bluetooth PTT is now in pairing status
Connect to Bluetooth speaker mic
Turn on the mobile radio, then press 【 POWER】 key twice, a ‘BEEP’ will be heard. Turn on the Bluetooth speaker mic, and double press to enter the pairing status.

Section III: How To Edit the frequency？

Turn on the APP, Long press the channel square, then select 【 Edit Channel】， When you edit the completed channel parameters, click 【 save】to save the Channel parameters. VGC VR-N7500 50W Dual Band Mobile Radio with APP
Programming - fig 1

**Section Ⅳ: Frequency display

**

When the frequency setting is completed, make the phone horizontally display, and the frequency will be displayed on the map interface (the arrow up means TX and the arrow down means RX)

Section V： Create an internet channel（For Android only）

Turn on APP，select【join network channel】/【create a new channel】
Create channel name and password. Free to join if no password
Click 【SAVE】

Section Ⅵ：Bind network channel （For Android only）

Long press the ID image, select 【 Login】, and select 【Register】 to Register the account.
Select【join network channel】/【join existing channel】，click【magnifier】icon， and type the channel name to join in. Enter the password if needed.
Long press on a channel square that you needed, select 【Bind network channel】, then select the network channel you joined to bind

Section Ⅶ：Turn on the Network repeater function （For Android only）

Under the network channel, you are bound to, press and hold【 Relay Mode】 to realize network and analog communication. (Note: To achieve network-analog communication, you must have the administrator qualification of the network group. If not, then not allowed to operate)
【Sync radio config】means ‘synchronous radio configuration’, this function can synchronize the analog frequency of the network channel bound to the network channel into the same parameters (with the consent of the members, please be cautious)

Section Ⅷ：Turn off the radio after pairing

Open the app, click on the【 POWER】 button and turn it to gray to turn off the radio. The next time you need to turn it on, open the app and click on 【POWER】 button again.

Section Ⅸ：Turn on/off signal TONE

Long press the ID photo to enter the following interface: Click 【Identification Information】to enable/disable signaling, if 【Location】On, Signaling tone is coming with position Signal

Section Ⅹ: Turn on the audio relay

Open the APP, enter the frequency page, click the setting icon , select 【General Settings】, and turn on 【Audio relay】 to implement the audio relay function (this function does not depend on the network)