Jwxstore GZ-24 Pack 24 Packs Wall Hooks for Hanging Instructions
- June 15, 2024
- Jwxstore
Table of Contents
Jwxstore GZ-24 Pack 24 Packs Wall Hooks for Hanging Instructions
Instructions
Installation method:
- Before installing the adhesive hook, please make sure the surface is clean, dry, free fromdust and oil, and wipe it dry first.
- Tear off the back of the protective film and finger don’t touch the adhesive.
- Paste on any smooth surface and press it tightly to remove any bubbles.
- It is recommended to leave 12 hours before hanging any item to ensure the product is firm and fixed.
Applicable surfaces: Ceramic tile, Marble, Glass, Stainless steel, Wood,
Metal or plastic.
Not suitable for the Surfaces : Poor wall surface, Rough surfaces, Painted
walls surface, paper wall…
Disassembly method: Heat it with a hair dryer, then slowly remove it from the side without leaving a trace
Notice
- It is recommends not hanging articles that can be a hazard or of value from the hook.
- It is not recommended for painted walls.
- Do not use in high temperature environment (no more than 80 degrees).
- Normally on the smooth tile surface, this hook can hold up to 33 lb/ 15 kg. But we’d like tosuggest no more than 22 lb/ 10 kg for holding a long time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>