Magic Bullet NutriBullet and NutiBullet Pro Blender User Guide

June 5, 2024
nutribullet

Magic Bullet NutriBullet and NutiBullet Pro Blender

Magic-Bullet-NutriBullet-and-NutiBullet-Pro-Blender-User-
PRODUCT

What’s included

Magic-Bullet-NutriBullet-and-NutiBullet-Pro-Blender-
User-FIG-1
Assembly guideMagic-Bullet-NutriBullet-and-NutiBullet-Pro-Blender-User-
FIG-2
NutriBullet° cup assembly & use.

  1. Review all warning and caution statements in the Important Safeguards section (pg. 2-7) before proceeding to Step 2.
  2. Place the motor base on a clean, dry, level surface such as a counter or table.
  3. Add ingredients and liquid to the NutriBullet° cup.
  4. NOTE: Do not overfill! To avoid leakage, do not add ingredients beyond the MAX line.Magic-Bullet-NutriBullet-and-NutiBullet-Pro-Blender-User-FIG-4
  5. Place the extractor blade onto the cup and twist until it is tightly sealed. Plug the power cord into ain electrical outlet.
  6. Turn the cup upside down and place it onto the motor base, gently push and twist.
  7. Unlock the assembly by gentlyY pushing and untwisting the cup counterclockwise.
  8. NOTE: Blending should not require longer than one minute to yield smooth and creamy results,

Care & maintenance

MOTOR BASE:

  • For the most part, the motor base doesn’t really get dirty, but if you neglect to twist the extractor blade on to the cup tightly, liquids can leak out and get into the base and stick to the activator
  • buttons.
  • To avoid risk of injury, NEVER use your hands or utensils to clean the white actuator
  • Tabs while the NutriBullet is plugged in.
  • Do not remove the rubber or plastic liners inside the mofor base.
  • Use a sponge or dish cloth dampened with warm soapy water to wipe down the inside and outside of the motor base until clean.
  • Pay particular attention to the white Actuator Tabs on the inside of the motor base to loosen any sticky debris from drips and spills.
  • If hecessary, you may use a small brush to scrub the area to ensure it is kept clean.

EXTRACTOR BLADE:

  • DO NOT REMOVE THE GASKET as this will permanently damage the extractor blade and cause leakage. If after washing as indicated above additional disinfecting is desired, you may rinse with a 10% vinegar/water solution or with lemon juice. t, over time, the gasket becomes loose or damaged, you may order a new extractor blade at NutriBulletme.com or contact Customer Service.
  • Dry the extractor blade completely. It is helpful to turn the blade on its side in your dish drainer to ensure
  • BOTH SIDES of the extractor blade are completely dried.

STUBBORN CLEAN UP:
If ingredients dry inside the NutriBullef Cup, make your cleanup a snap by filling the cup about 2/3 full with room temperature (21°C/70°F or less) water and screw on the extractor blade. Place the cup/exfractor blade assembly on the NutriBullet motor base for about 20-30 seconds. This will loosen the stuck ingredients, and with a light scrub and rinse, you’l be all finished.

Replacement parts

To order additional parts and accessories, please visit our website at NutriBulletme.com

LIMITED WARRANTY FOR NUTRIBULLET

NutriBullet’s limited warranty obligations are confined to the terms set forth below:
NutriBullet, LLC (“NutriBullet”) warrants this NutriBullet against defects in materials and workmanship for a period of two years from the date of original retail purchase.
This limited warranty is valid only in the country in which the product is purchased and comes with the product at no extra charge, however shipping and processing fees will be incurred for returns, replacements and or refunds.

OBTAINING WARRANTY SERVICE
For limited warranty service, Simply visit www.nutribulletme.com for
Customer Service details of your respective territory or contact our Customer Service department at info@nutribulletme.com and we will be glad fo help you. When you contact our
Customer Service department you will be asked for your name, address, and telephone number and to provide proof of the original purchase (receipt)containing a description of the product(s), purchase date, and the appropriate NutriBullet serial number(s). Before you send your product for limited warranty service please make sure to keep a copy of all relevant documents for your files (receipt, etc.). lt is always recommended to purchase product insurance and tracking services when sending your product for service. Remember, shipping and processing fees will be incurred and are not covered by the two-year limited warranty.
NUTRIBULLET IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY. NUTRIBULLET SPECIFICALLY DOES NOT REPRESENT THAT IT WILL BE ABLE TO REPAIR ANY PRODUCT UNDER THIS

LIMITED WARRANTY

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitafions on the duration of implied warranties or conditions, so the above limitations or exclusions may nof apply fo you. This warranty gives you specitic egal rights, and you may also have other rights that vary by state or province.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals