Beeitzie J45 Wireless Receiver User Manual

Beeitzie J45 Wireless Receiver

Product Diagram

Basic Parameters

Name: Wireless Receiver
Model: J45
BT version: V5.3
Supported protocols: HSP/HFP/A2DP/AVRCP
Audio decoding: SBC
Transmission distance: 70m
Frequency response range: 20Hz-20kHz
Microphone sensitivity: -38±2dB
Working voltage: 3.0~4.2V
Battery capacity: 300mAh
Music time: 26h (70% volume)
Talktime:76h (70%volume)
Charging time: 2h
Charging input: 5V/7.SmA
Product size: 50mm42mm19mm
Net weight 31g

Packing list

• Wireless receiver
  

• 3.5mm audio adapter

• Audio cable

• Charging cable

• Manual & Warranty Card

Pairing Operation

1. Press and hold the MFB for 2s. and the red, green, orange, and blue lights on the light ring will light up simultaneously for l second. indicating that the receiver is turned on. When the red. green. orange. and blue lights on the light ring start flashing alternately, it means the receiver is ready for pairing.
   

2. Turn on the Bluetooth function on your phone. search for and connect to the ‘J45’ d€”-lice. The red, green, orange, and blue lights on the receiver will flash slowly in breathing light mode to indicate that it is connected.
   

3. Connect the Bluetooth receiver’s AUX port to the audio input port of your home speaker or car stereo system using the provided 3.5mm audio cable, or plug your 3.5mm wired earphones into the AUX port on the Bluetooth receiver.
   

4. Now you can enjoy music wirelessly or answer calls hands-free.

How to pair with two devices simultaneously?

After successfully pairing with the first Bluetooth device, turn off the Bluetooth function of the first device, and the Bluetooth receiver will enter pairing mode again.
Turn on the Bluetooth function of the second Bluetooth device. search for ‘J45,’ and connect.
Turn on the Bluetooth function of the first Bluetooth device and select ‘J45’ from the pairing history.
Now both Bluetooth devices are connected to the receiver simultaneously.

Charge the device.

1. Please fully charge the product before first use. The battery can be charged by plugging in the SV DC power supply through the Type-C charger.
2. When the device is in low power state, please charge it in time with DC SV power supply input only.(Do not use power supply higher than 5V)
   

Common Operations

1. Turn on/off
   Auto shutdown afters minutes of no connection
   

2. Music functions
   Next song:
   Click to go to the next song
   Pause/Play:
   Click the multifunction button
   Volume up/down:
   Rotate the multifunction button
   Previous song:
   Click to go to the previous song
   

3. Activate Siri
   Long. press the previous song. and release after hearing a “di-di” sound.
   

4. Call functions.
   Answer/End call:
   Click the multifunctional button
   Reject call:
   Long press the multifunctional button for 2 seconds.
   Callback:
   Double-click the multifunctional button
   

5. Restore factory settings
   Simultaneously press the previous song( )and next song ( ) buttons for 5 seconds to clear pairing
   

Prompt Tone Instructions

“doo-doo-doo’ sound for Android system that cannot synchronize w it h the ring tone
Siri| “di -d i” sound

Receiver indicator lights

light mode.
Charging| The ones digit of the power display is flashing
Fully charged| The power display show s·1oo·

FAQ

Q: The receiver cannot pair with your Bluetooth-enabled phone, MP3 etc.

1. A: Please ensure that the receiver is turned on and in pairing mode: the red. green. b lue. and orange lights are flashing alternately.
2. Clear the pairing list of your Bluetooth device (phone.MP3 player. etc.) and try again.
3. If the light ring is slowly flashing in breathing mode. it means the receiver is already connected to another device. Press and hold the previous track(<<) and next track (>>) buttons simultaneously for 5 seconds to restore the factory settings. then restart the receiver to reconnect.

Q: Why is the sound too low when using the receiver?

1. A: Rotate the multifunctional button of the receiver to adjust the volume.
2. The playback channel of the mobile phone may not be turned on. Please turn on your phone’s Bluetooth function. click the icon on the right side of the connected earphones to turn on the “media channel and call channel”.
3. Please open your phone’s “Settings” interface. and check if there is a maximum volume limit on the phone.
4. Due to different settings on the phone (such as Android). the volume control of the receiver and the phone is operated separately. Please adjust the volume of both the phone and the receiver according to the phone’s settings.

Q: Why is there stuttering. discontinuity. noise. or electrical noise when listening to music or talking through a receiver?

1. A:Please verify if the receiver is low on battery. as this could potentially cause current sound or noise.
2. If the receiver and connected device are too far apart. the signal may be disrupted. It is recommended to keep them within a 10-meter range.
3. ln environments with strong interference. the receiver’s signal may also be disrupted by large shields. metal partitions. or other large interference sources.
4. It is crucial to ensure that the mobile phone’s signal and network are in optimal condition to prevent potential issues with jamming or discontinuity when listening to songs or talking.
5. Please inspect the audio cable and port for any signs of damage. If found. either insert the audio cable into its designated port or replace it with a new one.

Why is it not possible to charge the receiver?
It is possible that the charging port and data cable are not connected properly. Please try repeatedly unplugging and plugging in the data cable to ensure a good connection.
Please use adapters that comply with national or regional safety standards and the included charging cable to charge the receiver. Chargers with excessive power may be incompatible or damage the receiver’s battery.

Q: Why is there an error in the digital display of the receiver?

1. A:All electronic products have a self-power consumption issue. so it is normal for the product to display less than l 00% power during its first start-up after being fully charged.
2. Due to current loss and voltage drop during the use of electronic products. It is normal for the receiver to show a partial restoration of power when you restart it after a period of time if its power has been fully depleted.

Safety Criteria

Please follow the instructions and do not disassemble or modify the product for any reason. as it may lead to malfunction. Do not submerge the product in any liquid o r wash it with water.
Please use an adapter that meets national/regional safety standards and the included charging cable to charge the receiver. as using incompatible chargers may damage the battery or cause safety hazards.
Please use and store the product at normal temperatures: do not expose it to temperatures below 0°C or above 45°C.
Do not block the openings of the receiver. such as the charging port. audio port, or microphone.
Do not use the product during thunderstorms. as it may result in abnormal performance or signal interruption.

RF Exposure Compliance Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

If you have any questions or concerns about our product. please contact us via email: support@ibeeitzie.com.
We are dedicated to providing prompt assistance and aim to resolve your inquiries within 24 hours.
Please don’t hesitate to reach out to us. and we will be happy to help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>