JBL Pulse 3 Manual
- June 2, 2024
- JBL
Table of Contents
JBL Pulse 3 Manual
What’s in the box
Pulse 3, Charging Cable and Adapter
Buttons
Power on/off, Bluetooth, Effects, Lights, Volume
up/down, Play/Pause/Call Receive Buttons
Connections
Charging and AUX Connections
Bluetooth ®
Bluetooth connection
Connect to
Bluetooth via Mobile or Tabs
Music control
Single click for Play/Pause & Double
click for Next
Speakerphone
Speakerphone
Voice Assistant
Tap “Voice Assistant” in the JBL Connect app, to make the “ ” button as the activation key of Siri or Google Now on your phone. For JBL Connect app, Get it from Google Play or App Store
Voice
Assistant in the JBL Connect app
Press the “ ” button on the speaker to activate Siri or Google Now on your
phone. Please make sure the Siri or Google Now is enabled on your phone.
Voice Assistant
Activate
Lightshow
Lightshow
JBL Connect+
Wirelessly links more than 100 pcs JBL Connect+ compatible speakers together.
Play music on one of you JBL speakers and then press the JBL Connect+ button on all desired speakers to start pairing. All the other JBL speakers will play same music from the music source
JBL Connect+
Color Sync
Color Sync to all
Lightshow with JBL Connect App
Swipe the screen left and right to change the lightshow
Tap icon to change Pulse 3 color
Tap icon to adjust Pulse 3 brightness
Lightshow with JBL Connect App
Google Play
Store
or App Store
Download the JBL Connect app for the following features: stereo setup, firmware upgrade, and device renaming.
LED Behavior
JBL Pulse 3 LED Behavior
Warning
JBL Pulse 3 Warning
JBL Pulse 3 is IPX7 waterproof.
IMPORTANT: To ensure that the JBL Pulse 3 is waterproof, please remove
all cable connections and tightly close the cap; exposing the JBL Pulse 3 to
liquids without doing so may result in permanent damage to the speaker. And do
not expose JBL Pulse 3 to water while charging, as doing so may result in
permanent damage to the speaker or power source. IPX7 waterproof is defined as
the speaker can be immersed in water up to 1m for up to 30 minutes.
Specification
- Bluetooth version: 4.2
- Support: A2DP V1.3, AVRCP V1.6, HFP V1.6, HSP V1.2
- Transducer: 3 x 40mm
- Output power: 20W
- Frequency response:65Hz – 20kHz
- Signal-to-noise ratio: ≥80dB
- Battery type: Lithium-ion polymer (3.7V, 6000mAh)
- Battery charge time:4.5 hours @ 5V 2.3A
- Music playing time: up to 12 hours (varies by volume level and audio content)
- Bluetooth transmitter power:0 – 9dBm
- Bluetooth transmitter frequency range: 2.402 – 2.480GHz
- Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK
- Dimensions (H x W x D):223 x 92 x 92 (mm)
- Weight: 960g
The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
TR03626_F
JBL Pulse 3 Manual – Optimized PDF
JBL Pulse 3 Manual – Original PDF