Falcon 25-C/F-25-C/F-25-WDC-90 Instruction Manual
- June 2, 2024
- Allegion
Table of Contents
Instruction Manual
Falcon 25-C/F-25-C/F-25-WDC-90
Parts
If sexbolts are in box, see Sexbolt Preparation on page 7
Installation Instructions
- Prepare Door Cutout
2. Mark 4 Holes
3. If Installing Trim, Go To Trim Instructions
4. Prepare 4 Holes
5. Prepare Top Latch Holes
6. Prepare Bottom Latch Holes
7. Prepare Hole for Release Bracket
8. Install Top Strike & Release Bracket
9. Prepare Top Rod Length
*Do not cut threaded end of top rod
10. Drill New Hole, if Necessary
11. Attach Top Rod to Latch
12. Assemble Rods & Latches
13
14.
15
16. Grout Strike Into Floor
17. Attach Door to Frame
18. Adjust Center Slide with Latch Fully Extended
19. Verify Latch Retraction
20. Verify full latch extension
21. If Necessary, Cut Device
22. If Necessary, Reverse Handing
23
24. If Necessary, Adjust per Steps 19 & 20
25. Mark and Prepare 2 Holes
26
27
Sexbolt Preparation
If sexbolts are in box, during steps 4 and 26 prepare holes and install them as shown below.
Door Frame Preparation
Do not use slots for position. Drill as directed here.
Door & Frame Preparation
Top Latch (Fire)
Bottom Bolt Guide
Top Latch (Panic)
Bottom Strike Floor Cavity
Customer Service
Call: 1-877-671-7011
Visit: www.allegion.com/us
© Allegion 2019 Printed in U.S.A. 640009-00 Rev. 03/19-g
Read More About This Manual & Download PDF:
Falcon 25-C/F-25-C/F-25-WDC-90 Instruction Manual – Optimized
PDF
Falcon 25-C/F-25-C/F-25-WDC-90 Instruction Manual – Original
PDF
Questions about your Manual? Post in the comments!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>