ECOXGEAR SE28 Sound Extreme Elite 28 inch Power Sports User Guide
- June 4, 2024
- Ecoxgear
Table of Contents
SE28 Sound Extreme Elite 28 inch Power Sports
“`html
Specifications
- Brand: SoundExtreme
- Model: Elite 28 inch Powersports Amplified Soundbar (SE28)
- Model Number: SEI-EXSE2801AU
- Power Input: +12VDC input only. 25A maximum
- Aux-In: 3.5mm audio jack
- Aux-Out: 3.5mm audio jack
- LED Lighting Control Output: 6-pin Deutsch Jack
- USB Charging Port: USB A jack (5V, 2.1A)
Product Overview
The SoundExtreme Elite 28 inch Powersports Amplified Soundbar
(SE28) is a high-quality sound system designed for outdoor use. It
features backlit speakers, a control panel, USB charging port, and
various input/output jacks for versatile connectivity.
Installation and Setup
Mounting Your Soundbar
-
Attach the mounts to the ends of the soundbar using button head
bolts. -
Ensure the mounts are securely tightened for proper
installation.
Usage Instructions
Powering On/Off
To power on the SE28 soundbar, ensure the switch is turned on.
Press the Power Button on the speaker or the Remote Control. To
power off, turn the switch off.
Connecting Devices
Use the Aux-In port to connect additional devices like a
soundbar, CD player, or MP3 player. The Aux-Out port can be used to
connect to another soundbar, radio, or amplifier.
LED Lighting Control
The LED Lighting Control Output supports one or two LED Zones.
Connect your LED lights to enhance the visual experience.
USB Charging
The USB Charging Port allows you to charge your smartphone or
other devices. Ensure the speaker’s power is turned on for the USB
charging function to work.
Frequently Asked Questions (FAQ)
Q: How do I reset the Bluetooth pairing memory?
A: Press and hold the Bluetooth Button for 5 seconds to clear
all pairing memory and re-enable pairing mode.
Q: How can I maintain waterproofness of the unit?
A: Ensure that the caps on the USB Charging Port, Aux-In,
Aux-Out, and the Deutsch Jack are properly closed when not in use
to maintain waterproofness. Push firmly to ensure a tight seal.
“`
SoundExtreme Elite 28 inch Powersports Amplified Soundbar
SE28
Model: SEI-EXSE2801AU
User Guide
Introduction
Features
The SoundExtreme Elite (referred to as SE28) includes the following features.
Speaker with Big Sound · 500 watt peak power. · 8 Marine-grade speakers: 2
tweeters, 4 mid-ranges, 2 woofers. Multi-Audio Source Inputs and Output ·
Bluetooth streaming.
· Bluetooth 5.1 long range and reliable connection to your phone. · Dual
simultaneous connections switch playback between
two phones. · Built-in speakerphone function. · FM radio (no AM radio). · Aux-
In / Aux-Out. Built-in EcoCast Wireless Audio · Wirelessly stream your radio’s
Bluetooth music, FM radio and Aux-In audio to EcoCast-enabled speakers.
Supports up to 100 wireless connections between any mix of EcoCast-enabled
ECOXGEAR and SoundExtreme soundbars, subwoofers, radios, and party speakers. ·
Play audio streams wirelessly received from an EcoCast Transmitting speaker.
No wires! Built-in LEDCast 4-Zone LED Controller · 2 Zones for internal LED
lights. · 2 Zones for external, LEDCast-enabled LED strips, rocker lights, and
whips (sold separately).
2
Introduction
Integrated Addressable RGB LED Lights · Addressable RGB LED backlights on all
the 8 speakers · Dual-function rear facing light bar with both RGB party
lights, and
utility (white) light with 3 brightness settings Includes SoundExtreme RF
Universal Remote Control · Control the core audio and lighting functions
remotely anywhere
near and around your vehicle Smartphone SoundExtreme app · With the Free
smartphone SoundExtreme app customize your
LED’s colors, speed, brightness, music synch and LED chasing. Create custom
scenes to change all zones at once with your favorite LED light show. Add
additional 4-zone LED controllers (sold separately) and other LEDCast products
to expand your light show. Control them all from one app. 5V USB Charge Out ·
A 5V, 2.1A USB charge output for charging your phone. Mounting Options · End-
cap mounting brackets and integrated mounting rail with threaded mounting
holes for multiple mounting configuration options. · Check out
www.soundextreme.com.au for additional mounting bracket options.
3
Introduction
Important
· Please read the User Guide before installation and use.
· Your SoundExtreme Elite soundbar (referred to as SE28) requires a 12V DC
voltage power input. If your vehicle battery power output is not 12V (e.g.,
24V, 36V, or 48V), you will need a voltage converter with 12V output (e.g., a
48V-to-12V converter). Connecting the SE28 directly to higher voltages will
cause damage to the soundbar and VOID THE PRODUCT WARRANTY.
· Please use the included 12 AWG cable with the 25A Fuse to connect your SE28
to your power supply. The wiring harness for the previous generation of
ECOXGEAR soundbars was a 14 AWG cable with 15A Fuse this harness is NOT
compatible with the SE28 speaker.
· The SE28 is compatible with the ECOXGEAR audio and LED lighting EcoSystem,
which includes LEDCast and EcoCast Innovations. Look for the LEDCast and
EcoCast logos on the growing family of ECOXGEAR and SoundExtreme audio and
lighting solutions. EcoCast-enabled audio products are designed to be paired
with one or more EcoCast-enabled products. Simply initiate EcoCast
Transmitting Mode in one SoundExtreme or ECOXGEAR speaker and broadcast your
music to one or more EcoCast-enabled products in Receiving Mode.
· The SE28 has an integrated LED lighting controller with two outputs (Zones).
Each Zone can support multiple types of SoundExtreme LEDCast-enabled products.
But it is NOT compatible with other manufactures’ LED strips or LED whips. Do
NOT make modifications to the LED connectors or try to connect the LED outputs
to other brand LEDs. It may cause permanent damage to the product and void the
warranty.
· Each time you provide power to your SE28, the speaker will enter the Power
State that the speaker was in before power was
4
Introduction
removed the soundbar will either turn off (Standby Mode) or turn on i.e.,
the speaker functions similarly to your car radio. The SE28 has 3 power
states: Power On, Standby, and Power Off. The Power State functionality
depends on whether the SE28 is directly connected to a vehicle’s 12V battery
or through a switch (the SE28 connects to a switch, and the switch connects to
the 12V battery):
· If your SE28 is directly connected to a vehicle’s 12V battery, pressing the
Power Button on the speaker or on the Remote Control will turn on the speaker
or turn off the speaker (i.e. put speaker into Standby Mode where the speaker
consumes minimal power). As the SE28 keeps a power connection to the 12V
battery, this scenario does NOT have a complete power off state.
· If the SE28 is connected to a vehicle’s 12V battery through a switch, there
are two scenarios:
i. If the switch is turned off, the SE28 is powered off.
ii. If the switch is on, pressing the Power Button on the speaker or on the
Remote Control will turn on the speaker or put the speaker into Standby Mode.
· LED lights are known to create interference (noise) on some FM radio
frequencies (stations). When you tune or seek a station, it is recommended
that you turn the LED Party Lights off.
CAUTION: After taking the product out of the polyethylene bag, be sure to
dispose of the polyethylene bag out of the reach of children. Children may
play with the bag, which could result in the child’s suffocation.
Keep the BUTTON BATTERY out of reach of CHILDREN.
If you suspect your child has swallowed or inserted a
button battery, call the Poisons Information Centre
immediately on
13 11 26 for 24/7 fast, expert advice.
If your child is having any difficulty
breathing, contact 000. As it may lead to serious injury,
chemical burns or death in 2hrs or less.
5
SE28 SoundExtreme Elite Overview
SE28 Layout
Backlit Speakers
Control Panel
FRONT Backlit Woofer
Backlit Woofer
LEFT SIDE
12V Power-In SAE Connector
RIGHT SIDE Light Bar
BACK 6
SE28 SoundExtreme Elite Overview
Inputs, Outputs, and Jacks
USB Charging LED Lighting
Port
Control Output
Aux-In / Aux-Out Ports
Do NOT use these connections if the connections are wet.
Power Input: SAE connector. +12VDC input only. 25A maximum.
Aux-In: 3.5mm audio jack. This input can be used to connect an additional
soundbar, CD player, MP3 player, etc.
Aux-Out: 3.5mm audio jack. This output can be used to connect to an additional
soundbar, radio, amplifier, or to any audio system with an Aux-In connection.
LED Lighting Control Output: 6-pin Deutsch Jack. This jack supports one or two
LED Zones.
USB Charging Port: USB A jack. This output can be used to charge your
smartphone or other devices. USB charging only functions when the speaker’s
power is turned on. USB port rating is 5V, 2.1A.
IMPORTANT: Maintaining Waterproofness When not in use, if the caps on the USB
Charging Port, Aux-In, Aux-Out, or the Deutsch Jack are not properly closed,
the unit is NOT watertight. To close them properly, push firmly to be sure the
caps fit flat along their edges.
7
SE28 SoundExtreme Elite Overview
Speaker LEDs, Light Bar, Utility Light and LED Light Control Outputs
The SE28 soundbar has an integrated LEDCast lighting controller to support the
built-in addressable LED Party Lights and Utility Light on the soundbar and
two external LEDCast enabled LED products. The LED Party Lights driven by the
integrated controller provide millions of Color Modes: solid colors, fading,
jumping, chasing, speed, and variable brightness. · There are RGB LED Party
Lights behind the 4 mid-range
Speakers on the front, the 2 Woofers on each side, and rearfacing LED Light
Bar. · Additionally, the rear-facing Light Bar can also be used as a white
Utility Light, which provides 3 levels of brightness: high, mid, and low.
Note: The RGB LED Light Bar and Utility Light are co-located on the same Light
Bar on the back; as such, the Light Bar cannot function as a white Utility
Light and RGB LED Party Lights at the same time. Refer to Light Bar: Utility
Light and Zone 2 RGB LED Party Lights for more details. · The SE28 supports
two external LEDCast-enabled LED products, each has a maximum 5A DC output.
Refer to LED Lighting Control to External LEDs and LED Lighting Zones, Modes,
and Scenes for more details.
8
SE28 SoundExtreme Elite Overview
Buttons and LED Status Indicators
1. LED Indicators: The first 3 LEDs correspond to different functions: Power,
Bluetooth, and Mode.
i. Power
· Solid Green: Power On
· No Light: Power Off or Standby
i ii iii 1
2
4
3
5
7
6
8
10
9 11
ii. Bluetooth
12
· Flashing Blue: Bluetooth Paring
13
· Solid Blue: Bluetooth Connected
iii. Mode
· Solid Blue: Speaker Mode (EcoCast is turned off)
· Flashing Red: EcoCast Transmitting Mode Pairing Ready
· Solid Red: EcoCast Transmitting Mode
· Flashing Green: EcoCast Receiving Mode Pairing Ready
· Solid Green: EcoCast Receiving Mode Paired with EcoCast Transmitting speaker
· Solid Yellow: FM Mode
· Solid Purple: Aux-In
2. Power Button:
· Short-press to turn the soundbar On / put into Standby.
· Press and hold for 3 seconds to turn all 4 LED Zones On / Off.
3. Bluetooth Button: When in Bluetooth Mode, if the Bluetooth LED Indicator is not flashing Blue, press this button to enter Bluetooth 9
SE28 SoundExtreme Elite Overview
Pairing. If your device is connected (solid Blue LED), press the button to
disconnect and reenable pairing. Press and hold this button for 5 seconds to
clear all pairing memory.
4. EcoCast Button:
· Press button to enable EcoCast pairing
· Press and hold for 5 seconds to clear the EcoCast pairing memory.
5. Z1 Button: Zone 1 LED Party Lights on Backlit Speakers
· Short-press to turn on the LED Party Lights behind the speakers.
· When the lights are on, short-press to cycle through each of the 45 LED
Button Modes. There are a total of 44 LED Lighting Modes supported by the
Control Panel. (The SoundExtreme app can support many more Color Modes.) The
45th LED Button Mode is Off Mode. Therefore, a short-press on the 44th Mode
will turn the lights off, and another short-press will cycle back to the first
LED Lighting Mode again.
· When the lights are on, press and hold to turn off.
6. Z2 Button: Zone 2 Light Bar
· Short-press to turn on the LED Light Bar on the back of the soundbar. When
the lights are on, short-press to cycle through each of the 45 LED Button
Modes.
· When the lights are on, press and hold to turn off.
7. Audio Mode Button: Press button to cycle through the following Audio Modes
Bluetooth, EcoCast Transmitting, EcoCast Receiving, FM, and Aux-In.
8. Z3 Button: Zone 3 LED Lighting Control Output
· Short-press to turn on the Zone 3 external LEDCast-enabled product. When the
lights are on, short-press to cycle through each of the 45 LED Button Modes.
· When the lights are on, press and hold to turn off. 10
SE28 SoundExtreme Elite Overview
9. Z4 Button: Zone 4 LED Lighting Control Output · Short-press to turn on
the Zone 4 external LEDCast-enabled
product. When the lights are on, short-press to cycle through each of the 45
LED Button Modes. · When the lights are on, press and hold to turn off. 10.
Scenes Button: · Short-press to cycle through all the 5 Scenes. (Scenes can
only be programmed in the SoundExtreme smartphone app). · Press and hold to
turn On and turn Off the rear-facing Utility Light. 11. Volume Control
Buttons: · Press to adjust the speakers’ volume. · Press and hold to adjust
the volume continually. 12. Track Buttons: · In Bluetooth Mode, press buttons
to play the previous / next track. · In FM Mode · Short press either button to
tune to a radio station. · To “seek” (jump to the next available station),
press and hold
either Button for a few seconds until it starts to seek a station. 13. Play /
Pause / Answer / EcoTalk Button: · Press to play / pause a track or answer /
end a mobile call from a
paired Bluetooth phone. · EcoTalk: Press and hold to activate your Voice
Assistant (Siri or
Hey Google).
11
Installation and Wiring
Mounting Your Soundbar
1. To mount the speaker, first place the 2 Mounts on the ends of the
SoundExtreme at your desired orientation and attach them using three or four
(depending on the orientation of your mount) Button Head Bolts, each. Tighten
securely.
2. Ensure that the speaker fits in the desired location and mark where the
mounts will be attached to your vehicle.
3. Drill holes at the desired mounting points on your vehicle, large enough
for the provided ¼-20 Bolts to fit.
4. Place the Rubber Feet on both Mounts.
5. Attach the Mounts to your vehicle with the provided ¼-20 Bolts and Nuts.
Tighten securely.
Tip: Alternatively to drilling holes into your vehicle, you can also use the
provided Worm Clamps to secure the speaker to your vehicle. In order to
prevent scratching /damage to your vehicle, slide the provided rubber sleeves
onto the worm clamps before securing the speaker.
Note: For high-speed, high-vibration, and high-impact applications, we
recommend using the provided ¼-20 Bolt mounting solution, detailed above.
Check out other mounting accessories at www.soundextreme.com.au. 12
Installation and Wiring
Connecting to 12V DC Power Supply
IMPORTANT: Please use the included 12 AWG cable with the 25A Fuse to connect
your SE28 to your power supply. The wiring harness for the previous generation
of ECOXGEAR soundbars is NOT compatible with this speaker. The SE28 does NOT
have an internal battery. It MUST be connected to an external 12V DC power
supply to function. When you install the SE28 to a battery or a voltage
regulator on a golf cart, a boat, a quad bike, a UTV, or another vehicle, you
need to make sure that your vehicle battery or battery pack terminal voltage
is 12VDC. If the battery terminal voltage is not 12V, you will need a DC-DC
converter with a 12V output and 25A capacity. Connecting the SE28 to a non-
12VDC power source will lead to a malfunction or damage to the speaker.
WARNING: Even when powered off, the SE28 will continue to draw minimal power
from your battery. To prevent draining your battery when your SE28 or
powersports vehicle are not in use for more than 48 hours, unplug the SE28
from the battery or add a 25A toggle switch. (Toggle switch sold separately.)
Installation: 12V Power-In SAE Connector
1. Attach the 2.4m Power Cable to the 12V Power-In SAE Connector. Use
Caution: Do NOT connect to 12V Battery if the Power-In SAE Connector is wet.
Contact may cause electric shock and injury if wet.
13
Installation and Wiring
2. Remove the 25 Amp Blade Fuse from the Fuse Holder.
Use Caution: Do NOT remove Fuse if the Fuse Holder is wet. An improperly
fitted cap may cause electric shock and injury if wet.
3. To close properly, push firmly to be sure the cap snaps into place.
4. Next follow either the Gas Vehicle or Electric Vehicle Installation
instructions.
Installation: Gas Vehicle
1. Loosen the bolts on the battery terminals.
Use Caution: Do NOT attempt to loosen bolts if battery is wet. Contact may
cause electric shock and injury if wet.
2. Connect the BLACK wire to the BLACK, negative terminal, then the RED wire
to the RED, positive terminal. Unit will not work correctly and may be damaged
if wires are not correctly attached.
3. Tighten the bolts on the battery terminals until the connectors are held
firmly in place.
Loosen Bolts Black Cable Red Cable
Tighten Bolts 14
Installation and Wiring
4. Return the 25 Amp Blade Fuse into the Fuse Holder and close the cap.
Tip: Use zip ties to gather any excess wires, and secure them so that they are
not dangling, loosely.
Installation: Electric Vehicle
1. Switch your vehicle to Tow mode, if available.
2. Wire the BLACK wire to the GROUND on output of the DC-DC Converter.
3. Wire the RED wire to the POSITIVE (+) post on the output of the DCDC
converter. Unit will not work correctly and may be damaged if wires are not
correctly attached.
4. Return the 25 Amp Blade Fuse into the Fuse Holder and close the cap.
Use Caution: Do NOT connect to DC-DC converter if the 2.4m Power Cable or the
Power-In SAE Connector are wet. Contact may cause electric shock and injury if
wet.
Tip: Use zip ties to gather any excess wires, and secure them so that they are
not dangling, loosely.
Black Cable
Red Cable
15
Installation and Wiring
LED Lighting Control to External LEDs
Use the included Deutsch LED Cable to connect two LEDCastenabled LED products.
It has a Deutsch female connector on one end, and two 3-pin, round, female
connectors on the other end. 1. Remove the rubber cap on the speaker’s Deutsch
Connector Jack. IMPORTANT: Please keep it stored safely for later use. When
you remove the Deutsch Cable from your SE28, you MUST use the included rubber
cap to cover the Deutsch Jack. Failing to do this may result in potential
water or moisture penetration into the jack connector pins, cause damage to
the speaker, and VOID THE PRODUCT WARRANTY. 2. Plug in the Deutsch LED Cable
into the Jack.
3. Connect the 3-pin female connector on the Deutsch LED Cable to the 3-pin
male connector on an LEDCast-enabled product. Align the arrow on both
connectors, push in and screw the nut cap on the female connector.
16
Installation and Wiring
4. Each 3-Pin Signal and Power Connector: LED Light rod 4A max @12V Power
Supply.
Aux-In Audio Connection
1. Gently pull out the rubber cover from the Aux-In Jack. 2. Plug in a 3.5mm
audio cable (not included) into the audio output on
the source unit. 3. To make 3.5mm audio cable into the SE28 soundbar’s Aux-In
Jack. 4. Short-press Audio Mode Button to cycle through to Aux-In
Audio Mode.
Aux-Out Audio Connection
1. Gently pull out the rubber cover from the Aux-Out Jack. 2. Plug in a 3.5mm
audio cable (not included) into the audio input on
the external audio device. 3. To make 3.5mm audio cable into the SE28
soundbar’s Aux-Out Jack.
17
Audio Functions
Connecting and Playing Bluetooth Audio
1. Press the Power Button briefly to turn the speaker on.
2. Short-press the Audio Mode Button to cycle through the Audio Modes until
you hear, “Speaker Mode,” announced.
3. On your phone’s Bluetooth settings, select `SoundEx-SE28′ to pair. If you
don’t see the speaker name, turn your phone’s Bluetooth off and back on again
to refresh the list, or short-press the Bluetooth Button on the speaker to
enable Bluetooth Pairing again.
4. Wait for a few seconds. Once the pairing and connection are complete, the
speaker will announce, “Your phone is connected,” and the Bluetooth LED Status
Indicator will light up solid Blue.
5. Once connected, select and play your desired audio. You can now use the
Play / Pause Button, Volume Control Button, or Track Button to control your
audio.
Dual Simultaneous Connections and Switching Media Player Between Two Phones
Your SE28 is capable of maintaining simultaneous connections with two
smartphones, which allows you and your family or friends to share music on the
soundbar by switching the music playback between your phone and your family
member or friend’s phone. Follow the steps outlined below to switch back and
forth between two phones.
1. Connect your phone to the SE28.
2. Short-press the Bluetooth Button on the SE28, it will disconnect your
phone and enable Bluetooth pairing. Connect another phone to the SE28.
3. Short-press the Power Button on the SE28. The speaker will turn off. Then
short-press the button again to turn the speaker on.
4. Your SE28 will automatically reconnect to both phones.
18
Audio Functions
5. Play a selected music track on your phone. Your SE28 will play your music.
6. On the other phone, select a music track to play. Your SE28 will play the
music from the other phone. The media player on your phone will pause or stop.
7. If you want to switch back to your phone, press the Play button on your
phone’s media player, your SE28 will play the music on your phone. The media
player on the other phone will pause or stop.
Listening to FM Radio
Recommendation: Turn the LED Party Lights off when searching for a radio
station. LED lights can create interference with some FM radio frequencies.
Station Tuning · Short-press the Audio Mode Button to cycle through to FM
Mode,
the speaker will announce, “FM Mode.” · Short-press or to tune in a radio
station.
Press and hold or to seek a strong station. · Short-press the or Button to
adjust the volume.
EcoCast Stream Music Between Multiple Speakers
x100
The SE28 has EcoCast built-in, which allows the soundbar to broadcast
(transmit) or receive wireless audio streams to or from other EcoCast-enabled
products.
19
Audio Functions
EcoCast Streaming: Two Modes
Use the Audio Mode Button to set the speaker into EcoCast Transmitting Mode or
EcoCast Receiving Mode:
1. EcoCast Transmitting Mode: When set in this Mode, the EcoCast Transmitting
speaker broadcasts audio to multiple wireless connected EcoCast-enabled
speakers.
The Transmitting speaker’s audio streaming can be the music played from your
phone (via Bluetooth), FM Radio, or Aux-In Audio.
2. EcoCast Receiving Mode: When set in this Mode, the soundbar will receive
audio from an EcoCast Transmitting speaker, soundbar, or radio.
Notes:
· When set to Speaker Mode, the Amplified Speaker turns the EcoCast capability
off.
· When you have two or more soundbars or other ECOXGEAR or SoundExtreme
speakers bearing the EcoCast symbol, you can build a broadcast system by
initiating EcoCast Transmitting Mode in one soundbar and broadcasting your
music to one or more EcoCast-enabled speakers in EcoCast Receiving Mode.
EcoCast: First Two Amplified Speakers
A
B
Follow the steps below to pair two SE28 speakers:
1. Follow the Connecting and Playing Bluetooth Audio instructions to connect
one soundbar (Speaker A) to your Bluetooth device. After your device is
connected to Speaker A, you can play your desired audio.
20
Audio Functions
2. Press the Audio Mode Button to put Speaker A into EcoCast Transmitting
Mode. The Mode LED Status Indicator will flash Red, and the speaker will
announce, “EcoCast transmitting.”
3. Turn on the other soundbar (Speaker B) and press the Audio Mode Button to
cycle through to and initiate EcoCast Receiving Mode. The Mode LED Status
Indicator will flash Green, and the speaker will announce, “EcoCast
receiving.”
4. Once the connection between the soundbars is successful, Speaker B will
announce, “Connection successful,” and start playing audio.
EcoCast: Additional Receiving Speakers
B
A
C
D
1. Turn on the additional EcoCast-enabled speakers (Speaker C and Speaker D)
and press the Audio Mode Button to cycle through to and initiate EcoCast
Receiving Mode. The Mode LED Status Indicator will flash Green, and the
speaker will announce, “EcoCast receiving.”
2. On Speaker A (the speaker with the Mode LED Status Indicator shining solid
Red), PRESS AND HOLD the EcoCast Button for 3 seconds. The Mode LED Status
Indicator will flash Red / White.
3. Once the connection between the speakers is successful, Speaker C (and
Speaker D) will announce, “Connection successful,” and start playing audio.
21
Audio Functions
Notes:
· If all the speakers are turned off, then turned on, the speaker(s) in
EcoCast Receiving Mode (Speakers B, C, and D) will automatically re-connect to
the speaker in EcoCast Transmitting Mode (Speaker A). If they do not
automatically re-connected, please follow the above steps to reconnect.
· The EcoCast functionality has a maximum range of 9 m between speakers.
· While connecting the speakers, make sure that they are within a few feet of
each other.
EcoCast: Streaming Your FM Radio Station or Aux-In Audio to Multiple Speakers
FM
B
The SE28 soundbar (Speaker FM) also has the capability to stream FM radio
stations or Aux-In Audio to other EcoCast-enabled speakers in Receiving Mode.
When playing an FM radio station or Aux-In Audio, the SE28 automatically
enables EcoCast Transmitting. To receive FM streaming via EcoCast, follow the
steps below:
1. Turn on another EcoCast-enabled speaker (Speaker E), press the Audio Mode
Button to cycle though to EcoCast Receiving Mode. The Mode LED Status
Indicator will flash Green, and Speaker E will announce, “EcoCast receiving.”
2. On Speaker FM, PRESS AND HOLD the EcoCast Button for 3 seconds. The Mode
LED Status Indicator will flash Red and White.
3. Once the connection between the speakers is successful, Speaker E will
announce, “Connection successful,” and start playing audio.
22
Audio Functions
Play Audio Streams From Another EcoCast-Enabled Speaker
T
A
If there is an EcoCast-enabled speaker in EcoCast Transmitting Mode nearby,
you can set your SE28 soundbar (Speaker A) to EcoCast Receiving Mode and play
audio streams from the EcoCast Transmitting speaker (Speaker T):
1. Turn on Speaker A, press the Audio Mode Button to cycle though to EcoCast
Receiving Mode. The Mode LED Status Indicator will flash Green, and the
speaker will announce, “EcoCast receiving.”
2. On Speaker T, PRESS AND HOLD the EcoCast Button for 3 seconds. The LED
Status Indicator will flash Red.
Note: If Speaker T is not an SE28 soundbar, it may require a different button
operation to enter EcoCast Transmitting (Pairing Ready) Mode. Please refer to
Speaker T’s User Guide.
3. Once the connection between the speakers is successful, Speaker A will
announce, “Connection successful,” and start playing audio.
Note: A speaker in EcoCast Receiving Mode will play at the same volume level
(Volume Sync) as received in the audio streams from the EcoCast Transmitting
speaker. You can press + or on the EcoCast Receiving speaker to adjust the
volume for the EcoCast Receiving speaker only. However, as soon as the EcoCast
Transmitting speaker has a playback change (e.g., track change or a volume
change), the EcoCast Receiving speaker will once again Volume Sync with the
Transmitting speaker.
23
Lighting Control Concepts
LED Lighting Zones, Modes, and Scenes
In addition to the buttons on its Control Panel, the SE28 soundbar can also be
controlled by the included SoundExtreme Universal Remote Control and the
SoundExtreme Smartphone App. Below are some terms and definitions to help you
better understand the Remote Control and the SoundExtreme App.
Zone
A Zone corresponds to all the LED lights that are connected directly to one
physical connection on an LED Lighting Controller output, either integrated in
the SE28 or in an ExtremeController (sold separately). When you change a Zone
status (on / off, Mode, etc.), the LEDs connected to that Zone will change
accordingly. You can control one Zone or multiple Zones at a time.
The integrated LED Lighting Controller on the SE28 soundbar supports 4 Zones:
· Zone 1 The RGB LED Party Lights behind the speakers on the front and sides
of the soundbar.
· Zone 2 The LED Light Bar on the back of the soundbar.
· Zone 3 and Zone 4 Each Zone supports externally connected LEDCast-enabled
products.
Mode
There are 3 LED Mode categories, totaling in 44 Modes supported by the RF
Remote. The SoundExtreme app can support many more Color Modes.
1. Color Mode: Each Color Mode lights up the LEDs in a solid color. There are
8 Color Buttons on the Remote Control: Red, Green, Blue, White, Orange,
Yellow, Cyan, and Purple. You can create a custom color by utilizing the
SoundExtreme Smartphone App.
24
Lighting Control Concepts
2. Party Mode: There are 20 preset Party Modes accessible via the Remote
Control and SoundExtreme Smartphone App. The app allows you to customize each
of the 20 Party Modes, allowing for nearly unlimited color, cascading, and LED
chasing options.
3. Music Mode: There are 16 Music Modes accessible via the Remote Control and
SoundExtreme Smartphone App.
Scene A Scene is programed via the SoundExtreme Smartphone App. You can
customize each Zone into a Scene (a preset). Setting the Scenes on the app
allows a 1-button press to bring up your desired custom settings for all of
the LED products connected to the LED Lighting Controller. The SE28 soundbar
has 5 Scene settings. They are user customizable and programmable. The default
Scene settings are: · Scene 1: Patriot 1 (Red, White, and Blue) · Scene 2:
Flowing colors · Scene 3: Zoom · Scene 4: Fading colors · Scene 5: Christmas
(Red, Green, and White)
Control Panel: Lighting Control Buttons
There are 5 buttons on the SE28 Control Panel that are used to operate the LED
Party Lights in the 4 Zones and the Utility Light on the back of the soundbar.
Refer to the following table for an overview of the Lighting Control Buttons
functionality.
25
Lighting Control Concepts
BUTTON
ACTION
Short-Press
FUNCTION
· To cycle through the 44 LED Modes in each Zone.
· If off, to turn on each Zone.
Press and Hold (for 3 seconds)
Short-Press
When on, to turn the corresponding Zone off.
· If Party Lights are on, to cycle through the 44 LED Modes in Zone 2.
· If off, to turn on Zone 2.
· If Utility Light is on, to cycle through the 3 Brightness Levels.
SCENES
Press and Hold (for 3 seconds)
Short-Press
Press and Hold (for 3 seconds)
When Zone 2 (Light Bar Party Lights) is on, to turn Zone 2 off.
To cycle through the 5 defined Scenes for all Zones.
To turn on / off the rear-facing Utility Light.
26
Lighting Control Concepts
NOTES
· There are 44 distinct LED Modes: 8 Color Modes, 20 Party Modes, and 16 Music
Modes. You can also use the SoundExtreme Smartphone App to find a specific LED
Mode.
· When turned on, each Zone will enter the last LED status it was in before
powering off.
· Once a 44-Mode cycle is completed, the next short-press will turn the lights
off. Turning lights back on will restart the cycle.
· There are 44 distinct LED Modes: 8 Color Modes, 20 Party Modes, and 16 Music
Modes. You can also use the SoundExtreme Smartphone App to find a specific LED
Mode.
· When turned on, Zone 2 will enter the last LED status it was in before
powering off. · Once a 44-Mode cycle is completed, the next short-press will
turn the lights off.
Turning lights back on will restart the cycle. · When the Utility Light is on,
each short-press will cycle through 3 Brightness
Levels: high, mid, and low.
· The Party Lights in all 4 Zones will light up as defined by Scene 1. Each
following short-press will cycle through the next 4 Scenes.
· If the Party Lights in Zone 2 are on, turning on the Utility Light will
automatically turn the Party Lights in Zone 2 off.
27
Lighting Control Concepts
Light Bar: Utility Light and Zone 2 RGB LED Party Lights
The Utility Light (White) and the Zone 2 Party Lights are co-located on the
same Light Bar on the back of the SE28 soundbar. To avoid the lighting
interferences between the Utility Light and Party Lights, the button functions
are designed to prevent the Utility Light and Party Lights from being turned
on at the same time. · Short-press the Zone 2 Button to turn the Party Lights
on.
· If the Party Lights in Zone 2 are on, turning on the Utility Light will
automatically turn the Party Lights in Zone 2 off.
· Press and hold the Scenes Button to turn the Utility Light on / off. · When
the Utility Light is on, the SE28 will NOT allow the Zone 2 Party Lights to
turn on. You MUST turn the Utility Light off before you turn the Zone 2 Party
Lights on. · When the utility light is on, you can short-press the Z2 Button
to change the Brightness Level: high, mid, low.
28
RF Remote Control
Power Button
Audio Playback Control Buttons Common Buttons: Mode, Scene, Bright, Speed,
and Color
Radio Presets and Remote Pairing Buttons: MFB, P1 · · · P3
Zone Buttons: Z1 · · · Z4
Zone-Mode Buttons: Z1-M · · · Z4-M
The SE28 soundbar comes with a SoundExtreme Universal Remote Control.
Basic Functions
1. Power, MODE, and all the Audio Playback Control Buttons on the Remote
Control have the same functions as their corresponding buttons on the Control
Panel.
Note: There are two MODE Buttons on the Remote Control. The MODE Button at the
top is for Audio Mode. The MODE Button in the middle is for LED Party Light
Mode.
2. LED Lighting Control Buttons: There are 20 buttons on the RF Remote
Control that are used to operate the LED Party Lights in the 4 Zones and the
Utility Light on the back of the soundbar. The Zone Buttons (Z1…Z4) and Zone-
Mode Buttons (Z1-M… Z4-M) affect individual Zones. The Common Buttons (LED
29
RF Remote Control
Mode, Scene, Bright, Speed, and 8 Color Buttons) affect all 4 Zones at once.
3. MFB, P1, P2, and P3 Buttons:
· When the soundbar is in FM mode, P1, P2, and P3 Buttons serve as 3 Preset
Buttons:
i. PRESS AND HOLD a Preset Button for 2 seconds to save the current station to
the corresponding Preset.
ii. Short-press a Preset Button to tune to the saved station corresponding to
that Preset Button.
· In combination with the MFB Button, the P1, P2 or P3 Buttons will let you to
pair one Remote Control with up to 3 speakers / soundbars or to select an
individual product to control.
Remote Control Pairing and Speaker Selection
The SoundExtreme Universal Remote Control can pair with and save up to 3
soundbars in its memory as P1, P2, and P3 speakers. The included Remote
Control comes paired with the SE28 soundbar as the P1 speaker. You can use it
out-of-the-box to control the speaker after it is powered on.
If the speaker does not react when you press a button on the Remote Control,
check if the battery isolator (clear plastic strip) on the Remote battery
compartment is removed (pulled out) completely. Then, follow the steps below.
Remote Control Pairing
1. When the soundbar is on, PRESS AND HOLD the < and > Buttons on the speaker
at the same time for 3 seconds. The soundbar’s LED Party Lights will flash
Green, indicating the speaker is ready to pair with a remote.
2. PRESS AND HOLD the MFB Button for 3 seconds, then press P1 (P2, or P3) to
save the pairing soundbar as the P1
30
RF Remote Control
(P2, or P3) speaker. Once paired, the soundbar’s LED Party Lights will rapidly
flash Green 3 times.
Select a Soundbar to Control
1
2
Assuming your Remote Control has paired with Soundbar 1 and 2 as P1 and P2
soundbars, Soundbar 1 is currently controlled by the Remote Control. If you
want to use the Remote Control to control Soundbar 2, follow the steps below.
1. PRESS AND HOLD the MFB Button for 3 seconds, Soundbar 1’s Party Lights
will flash Blue, indicating your remote is in the process of speaker
selection.
2. While Soundbar 1 is flashing Blue, press P2. The Party Lights on Soundbar
2 will flash Blue 3 times and produce a prompt double-beep tone, indicating
Soundbar 2 is selected.
3. Press a button on the Remote Control. Soundbar 2 will produce the
corresponding action, while Soundbar 1 will have no response.
Soundbar Party Lights and Utility Light Control
When the SE28 soundbar is on, you can use the Remote Control to change the
Party Lights and Utility Light.
Zone 1 to Zone 4: Party Lights Lighting Mode Control
1. PRESS AND HOLD the Power Button to turn on / off all the Party Lights.
2. Press the Z1, Z2, Z3, or Z4 Button. The Party Lights will briefly light up
Green in ascending order and then shine solid Orange or a random color
pattern.
31
RF Remote Control
3. Now you can change the LED Lighting Mode by short-pressing one of the
Zone-Mode Buttons (Z1-M, Z2-M, Z3-M, or Z4-M) to cycle through the three LED
Mode categories for only the corresponding Zone.
Note: There are 44 distinct LED Modes. Instead of using a Zone-Mode Button to
cycle through to a desired LED Mode, you can also use the SoundExtreme
Smartphone App to find a specific LED Mode.
Common Buttons: Modifying All 4 Zones
You can change the LED Lighting Mode in all 4 Zones with one of the following
button presses:
· Short-press the LED Mode Button. Each short-press will cycle through all 44
LED Modes.
· Short-press the Scene Button to cycle through the 5 Scenes.
· Short-press the Bright Button to cycle through 5 levels of brightness.
· Short-press the Speed Button to cycle through 5 levels of speed. The
lighting patterns, as defined by the selected LED Lighting Mode, will progress
more quickly with each short-press.
· Short-press one of the 8 Color Buttons to light the LEDs in the
corresponding color
Refer to the Remote Functions Overview chart for more details.
Utility Light Control
The Utility Light can be controlled by the Scene Button and the Z2-M Button.
1. PRESS AND HOLD the Scene Button to turn on the Utility Light.
2. When the Utility Light is on, short-press the Z2-M Button to cycle through
3 Brightness Levels: High, Mid, and Low
32
RF Remote Control
3. PRESS AND HOLD the Scene Button to turn off the Utility Light.
Advanced Functions
Cycle to Previous Mode As previously indicated, you can cycle through the 44
distinct LED Modes in all 4 Zones or in individual Zones. You can also cycle
back to the previous LED Mode: · To cycle back to the previous LED Mode for
ALL 4 Zones, double-
click the LED Mode Button. · To cycle back to the previous LED Mode in a
single Zone, double-
click one of the Zone-Mode Buttons (Z1-M, Z2-M, Z3-M, or Z4-M). Common
Buttons: Modifying a Single Zone As previously indicated, a short-press of any
of the Common Buttons or will change the LED lighting effect in all 4 Zones.
You can also change the LED lighting effect in only 1 Zone at a time: 1. To
activate the Zone you want to change, PRESS AND HOLD
the Zone Button. For example, press and hold the Z1 Button for 3 seconds. The
LEDs in Zone 1 will flash Green twice, indicating that Zone 1 is selected. 2.
You can now PRESS AND HOLD any of the 8 Color Buttons, the Bright Button, or
the Speed Button for 2 seconds (instead of a short-press) to modify the LEDs
in the selected Zone. 3. To change another Zone, e.g. Zone 3, PRESS AND HOLD
the Z3 Button. The LEDs on Zone 3 will flash Green twice, indicating that Zone
3 is selected. Follow step 2 to modify the LEDs in Zone 3. Note: Any time you
short-press a Common Button on the Remote, it will change the LEDs in all 4
Zones.
33
Remote Functions Overview
BUTTON
ACTION
Press and Hold (for 3 seconds)
Short-Press
Short-Press
FUNCTION
Turn on / off the LEDs in all Zones.
Turn on / put the soundbar into Standby Mode. To play / pause audio.
Short-Press
Press and Hold (for 3 seconds)
Short-Press
· In Bluetooth Mode: To skip to the previous or the next track.
· In FM Mode: To tune in a station. In FM Mode: To seek a strong station.
To Change Audio Modes.
Press and Hold (for 3 seconds)
To enable EcoCast pairing.
Short-Press
To increase or decrease the speaker’s volume.
Press and Hold Both (for 3 seconds)
To adjust the volume continually.
34
Remote Functions Overview
NOTES
· When turned on, each of the LEDs will light up Green in ascending order.
When turned off, the LEDs light up Red in descending order.
· When in Standby Mode, the speaker consumes minimal power.
· There are 5 Audio Modes Bluetooth, EcoCast Transmitting, EcoCast
Receiving, FM, and Aux-In.
· The speakers will emit a tone to indicate when maximum or minimum volume
setting is reached.
35
Remote Functions Overview
BUTTON
ACTION
Short-Press
FUNCTION
To turn on / off each Zone.
Press and Hold (for 3 seconds)
To select a single Zone.
Short-Press
Double-Click Short-Press
· To cycle through the three LED Mode categories for the selected Zone.
· Z2-M Only: If Utility Light is on, to cycle through the 3 Brightness Levels
(high, mid, low).
To cycle back to the previous LED Mode for the selected Zone.
To cycle through the three LED Mode categories for all Zones.
Double-Click
Short-Press
Press and Hold (for 3 seconds)
To cycle back to the previous LED Mode for all Zones.
To cycle through the 5 defined Scenes for all Zones.
To Turn on / off the rear-facing Utility Light.
36
Remote Functions Overview
NOTES
· When turned on, LEDs in Zone 1 will light up Green in ascending order. When
turned off, the LEDs light up Red in descending order.
· The LEDs in the selected Zone will rapidly flash Green twice. You can now
Press and Hold one of the Common Buttons to change the Brightness, Speed, or
Color for the selected Zone.
· There are 44 distinct LED Modes: 8 Color Modes, 20 Party Modes, and 16 Music
Modes. You can also use the SoundExtreme Smartphone App to find a specific LED
Mode.
· There are 44 distinct LED Modes: 8 Color Modes, 20 Party Modes, and 16 Music
Modes. You can also use the SoundExtreme Smartphone App to find a specific LED
Mode.
· If the Party Lights in Zone 2 are on, turning on the Utility Light will
automatically turn the Party Lights in Zone 2 off.
37
Remote Functions Overview
BUTTON 38
ACTION
Short-Press
Press and Hold (for 2 seconds)
Short-Press
FUNCTION
To cycle through 5 levels of Brightness / Speed for all Zones.
To cycle through 5 levels of Brightness / Speed for the slected Zone.
To select the corresponding Color for all Zones.
Press and Hold (for 2 seconds)
Press and Hold (for 3 seconds)
Press and Hold (for 2 seconds)
Short-Press
Press and Hold (for 2 seconds)
Short-Press
Press and Hold (for 2 seconds)
Short-Press
To select the corresponding Color for the selected Zone.
To select a speaker to control.
When in FM Mode: To save the current station to the P1 Button.
When in FM Mode: To tune to the station saved to the P1 Button
When in FM Mode: To save the current station to the P2 Button.
When in FM Mode: To tune to the station saved to the P2 Button
When in FM Mode: To save the current station to the P3 Button.
When in FM Mode: To tune to the station saved to the P3 Button
Remote Functions Overview
NOTES
· You must first Press and Hold the corresponding Zone Button to select a Zone
before using this feature.
· There are 8 Color Buttons on the Remote Control: Red, Green, Blue, White,
Orange, Yellow, Cyan, and Purple. You can also use the SoundExtreme Smartphone
App create a custom color.
· You must first Press and Hold the corresponding Zone Button to select a Zone
before using this feature.
· Refer to Remote Control Pairing and Speaker Selection for more details. ·
Refer to Remote Control Pairing and Speaker Selection for more details.
· Refer to Remote Control Pairing and Speaker Selection for more details.
· Refer to Remote Control Pairing and Speaker Selection for more details.
39
SoundExtreme App
The SE28 soundbar can be operated via the SoundExtreme Smartphone App.
Download and Install
For iPhones, download the app from the following URL:
https://apps.apple.com/us/app/soundextreme/id1670708941 For Android phones,
download the app from the following URL:
https://play.google.com/store/apps/details?id=com.cchip.ecoxgear
Alternatively, use the following QR Codes to download the SoundExtreme
Smartphone App.
iOS
Android
App Overview
Password Secured: The app is password protected so others cannot gain access
and control your SE28. The default password is 0000.
Name Your Devices: You can change and customize the name of your devices and
Zones, such as Rear speakers, Soundbar, etc.
Set Up Modes: Use the app to set up the LED Mode for each of the Zones on your
soundbar. You can also change the Brightness and Speed.
40
SoundExtreme App
Create and save Scenes: A Scene is a preprogrammed light show that you can
save for later quick-access. We have created 5 default Scenes that are fully
customizable and programmable. Set Up a Group: Create and set up a group of
devices (multiple soundbars, or other SoundExtreme products with LEDCast
built-in). This will allow all the LED lights connected to different devices
to be controlled by the SoundExtreme Smartphone App at the same time.
Bluetooth Low Energy: The SoundExtreme Smartphone App relies on a BLE
(Bluetooth Low Energy) connection between your phone and the SE28. Make Sure
you turn on Bluetooth on your smartphone.
Initial App Connection and Device & LED Setup
1. Launch the SoundExtreme App on your smartphone or other BLE-enabled
device.
2. On the SoundExtreme App homepage, tap Device Connection List.
41
SoundExtreme App
3. If your SE28 is powered on, it will show up as LEDs-SE28 on the app’s
Connect Device screen. Tap the device name on the screen. A checkmark will
appear on the right. Tap the Connect button.
4. A dialog window will popup asking you to enter a password. The SE28
default password is 0000.
5. If the app connects to your SE28 successfully, a popup message will
appear, showing the Device & LED Settings for the 2 external Zones on your
SE28 and ask you if you want to change these settings. On the bottom of the
message there is a checkbox to ask if you want this message to be displayed
the next time the app connects to your SE28.
6. If you choose to change the Device & LED Settings, the app will bring you
to the Device & LED Set Up screen.
7. For the Device field, select your SE28 (LEDs-SE28).
8. For the Zone field, select Zone 3 or 4, depending on which output you
connected
42
your LEDCast-enabled product to.
9. For the Model field, select your LEDCast-enabled product from the pulldown
list.
10. Once the Device & LED Settings are completed, the App will bring you to
the Device List screen.
11. Select your SE28. It will take you to the Scene screen. There are 5
predefined Scenes on the SE28. You can turn on one of the 5 Scenes to light up
the LEDs. For example, tap the On / Off button at the right for Scene 1, the
Party Lights will light up Red, White, and Blue, which is the LED Lighting
Mode defined for Scene 1 Patriot 1.
SoundExtreme App
43
SoundExtreme App
Set Up Zones
1. Select your SE28 on the Device list, and the app will bring you to the
Zone screen.
2. Tap one of the 4 Zones, and you will go to the Zone LED Mode Settings
screen. There are 3 tabs: Color, Party, and Music, which allow you to select a
solid Color, a Party Mode, or a Music Mode.
44
· When you choose a Mode, the LEDs connected to the Zone you selected will
light up accordingly, giving you a preview.
· If you tap the Save button on the screen, the app will save your setting for
the selected Zone.
· If you tap the Cancel button or exit the LED Mode Settings screen, your Mode
selection will not be saved and LEDs connected to that Zone will display the
previously selected LED Mode.
SoundExtreme App
45
SoundExtreme App
3. After you set up the Modes for each of the Zones, the SE28 setup is
complete.
46
Set Up Scenes
1. On the Device List screen, select your SE28 (LEDsSE28) and the app will
bring you to the Zone screen. Tap the Scene tab. The app will show 5
predefined scenes on your SE28.
2. You can change a Scene’s LED settings by selecting any of the 5 Scenes.
When you select the Scene, you will go to the LED Mode Setting screen. You can
use the same procedure as in the Set Up Zones section to set up each Zone and
save the Scene’s new LED settings.
3. After you set up LED Modes for all the Zones, the setup is complete for
the selected Scene.
SoundExtreme App
47
SoundExtreme App
Utility Light Control
You can control the SE28’s rear-facing Utility Light with the following steps:
1. On the Device List screen, select your SE28 (LEDsSE28) and the app will
bring you to the Zone screen.
2. On Zone screen, tap Dome/Light Bar (Zone 2) and you will go to the
Dome/Light Bar Settings screen. As previously indicated, once the Utility
Light is turned on, the Zone 2 RGB LED Party Lights will turn off
automatically.
3. There are 3 Brightness Levels (High, Mid, and Low) on the slide bar for
you to choose from.
4. You can also set a countdown timer for the Utility Light by tapping Count
Down. Set up a time on the countdown timer from the popup window. Once the
countdown is over, the app will turn off the Utility Light.
48
Change Password
To add extra security, you can change the default password of 0000 to your
desired 4-digit numeric password. Please note that the password is stored in
your SE28, not the SoundExtreme app. So, after you change the password, please
make a note in case you forget your password. The password won’t be reset by
reinstalling the app or changing to another smartphone. The only way to reset
your password is to conduct a factory reset on your SE28 soundbar.
Follow the steps below to change your password:
1. Select the Menu Icon at the top-right corner of the screen.
2. Select Device Password from the menu.
SoundExtreme App
49
SoundExtreme App
3. Once at the Device Password screen, select the device that you want to
change the password to.
4. Enter the current password, the new password, and re-enter the new
password. Then tap the Confirm button.
5. If the change is successfully saved, the app will display a confirmation
message.
This is a one-time event. You do not have to enter in your password every time
you launch the app, as your app will remember your password.
50
SoundExtreme App
Factory Reset
If you forget the password, you will need to do a Factory Reset on the SE28 so
that the password is reset to its default value: 0000. · While the SE28 is
turned on, PRESS AND HOLD the V-, V+,
and Buttons on the Control Panel at the same time for 3 seconds. The SE28 will
produce a prompt triple-beep tone, to show that the reset is successful. Note:
Besides the password reset, a Factory Reset will also configure the SE28 to
the following factory settings: · All Zones are set to Scene 1 Patriot 1
with 100% Brightness and the Speed is set to 80%. · All 5 customer
configurable Scenes are set to the Factory Default Scenes. · All 3 FM station
Presets are cleared. · All the EcoCast and Bluetooth pairing records are
erased.
51
Specifications
Unit Dimensions
4.5 in / 114 mm
4.5 in / 114 mm Unit + Mount Dimensions
27.4 in / 696 mm 28 in / 711 mm
5.75 in / 145 mm
5 in / 128 mm
28.7 in / 729 mm
52
Specifications
Unit Weight 11 lbs / 4.98Kg
Radio Frequency Range US: FM 87.5 – 107.9 mHz
Unit + Mounts Weight 12.5Ibs / 5.66Kg
RF Remote Operating Frequency 433 MHz
Bluetooth Compliance Bluetooth V 5.1
Power Cable In-Line Blade Fuse 25A, 32V
Bluetooth Frequency Band Storage Temperature 2.402~2.480GHz ISM Spectrum -40°F to 122°F / -40°C to 50°C
Modulation GFSK, /4-DQPSK, 8DPSK
Operating Temperature 23°F to 95°F / -5°C to 35°C
Bluetooth Range Up to 100 ft / 30m
Waterproof / Dust Rating IP66
Tweeter (2x) 1.5” (38 mm) tweeter
Woofer (2x) 4” (102 mm) woofer
Mid-Range Speaker (4x) 2.25” (57 mm) speaker
Audio Output Power 500W (peak)
Power Supply Input Voltage: 12VDC, 25A (requires connection to external DC battery for power)
USB Output 5V, 2.1A
EcoCast Range 30 ft / 9.1 m between Casting speaker and Receiving speakers
53
Important Legal Information
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1.) This device may not cause harmful
interference, and 2.) This device must accept any interference received,
including interference that may cause undesired operation. WARNING: Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. NOTE: FCC’s RF
Exposure guidelines, this equipment should be installed and operated with
minimum distance between 20cm the radiator to your body. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: reorient or relocate the receiving antenna, increase the
separation between the equipment and receiver, connect the equipment into an
outlet on a circuit different from that to which the receiver is connected,
consult the dealer or an experienced radio/TV technician for help.
RF WARNING STATEMENT:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
IC STATEMENT:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: 1.) This device may not
cause interference, and 2.) This device must accept any interference,
including interference that may cause undesired operation of the device.
PRODUCT USE AND PROTECTION:
Read and follow all instructions. Use only as intended. The SoundExtreme unit
is intended to be used indoors or outdoors and in land or water environments.
The unit has been tested to IP66 waterproofing standards, which means the unit
can be exposed to dust and water, but should NOT be submerged underwater. To
prevent fi re or shock, do NOT attempt to power this unit if it is wet or you
suspect water has entered the unit. In this situation, please return the unit
to Enfinity for a free assessment.
SAFETY ADVISORY & WARNING:
Read and follow all instructions. Use only as intended. CAUTION: Do NOT open
to repair. A qualified technician must carry out repair work. ATTENTION: Do
NOT connect to a SoundExtreme product with LEDCast technology while the unit
is wet. Make sure
all connections are dry BEFORE connecting to a power source. Failure to do so
may result in electrical damage to the unit and may void the warranty.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov ATTENTION: Do
NOT dispose of in a landfi ll. Contact certifi ed recycling agent to dispose
of the unit.
SAFETY:
This product has a limited life span of use and should be replaced when it
shows obvious signs of wear. Do not modify or remove any original component
parts of the speaker. Doing so could cause damage to the unit, allowing water
to ingress. A unit with water ingress should not be charged due to potential
risk of fire or shock. Please exercise care and good judgment when using your
SoundExtreme unit. You should always 1.) Return the unit to Enfinity if you
suspect water ingress into the unit or if the unit has experienced a severe
impact that may have affected the integrity of the unit to take on water.
54
Important Legal Information
You should never 1.) Never power your SoundExtreme unit if you suspect water
has entered the device. Powering a device with water
inside could be potentially hazardous and cause fire or a spark. 2.) Never use
your SoundExtreme unit if you have dropped it or thrown it against a hard
surface which may have
destroyed the integrity of the housing. In the event of a severe impact to
your unit, please return the unit to Enfinity to review for potential damage.
3.) Never attempt to fi x, repair your SoundExtreme unit . Please send it back
to Enfinity for any assessments and repairs.
CARE, MAINTENANCE & PRECAUTIONS:
1.) Do NOT apply excessive force to any surfaces of the unit. 2.) Do NOT use
or store the unit in places with high temperature. 3.) AVOID prolonged
exposure to ultraviolet radiation (UV sunlight) and strong magnetic fields.
LIMITED MANUFACTURER’S WARRANTY:
The SE28 is covered by a 1-year limited warranty that covers defects in
workmanship and / or materials for a period of 1 year from original purchase
date. This warranty does not apply to any products which have been abused,
neglected, modifi ed or used for a purpose other than the one for which they
were manufactured. Please refer to the above care and maintenance instructions
for suggested care details. The warranty is valid only for the original owner
who purchases the unit from an authorized dealer. Transfers do not qualify for
warranty protection. Enfinity reserves the right to replace any out-of-stock
or discontinued product with a comparable product. Discontinued products may
not be available for warranty replacement. Any contents are NOT covered by the
limited manufacturer’s warranty. Warranty terms may be revised without notifi
cation at the discretion of the manufacturer. Please visit
www.soundextreme.com.au for additional product & warranty information.
SE28 SOUNDEXTREME ELITE by SOUNDEXTREME. SOUNDEXTREME and ECOXGEAR are the
registered trademark of Enfinity Pty Ltd
Designed in Texas. Made in China. This product is protected under patent US
9,307,307 B2 and several patents pending.
55
What’s in the Box
SoundExtreme Speaker
SoundExtreme Elite 28 inch Powersports Amplified Soundbar
SE28
Model: SEI-EXSE2801
User Guide
SoundExtreme SoundExtreme User Guide Remote Control
2.4m Power Cable
6-pin Deutsch to 2 3-pin LED Connectors
(2x) ¼-20 SHCS Bolt 3.5″ long
(2x) Rubber Allen Wrench (2x) ¼-20 SHCS (2x) ¼-20 Stud
Sleeves
for ¼-20
Bolt 2 long
1.5 long
(2x) ¼-20 SHCS (2x) ¼-20 SHCS Bolt 1.25 long Bolt 0.5 long
(2x) Mounts
(8x) #8-32 Button (2x) ¼-20
Head Bolts
Washer (S)
(2x) Rubber (4x) Worm Clamps (2x) ¼-20
Feet
– ½ Width
Washer (L)
(2x) ¼-20 Nut
5260