ECOXGEAR 990004450 Small Rugged IPX67 Waterproof User Guide

: June 4, 2024
: Ecoxgear

Table of Contents

ECOXGEAR

ECOXGEAR

ECOXGEAR 990004450 Small Rugged IPX67 Waterproof

product

Specifications

BRAND: ECOXGEAR
WATERPROOF: IP67
SPEAKER: 15W
PLAYTIME: 15+ hours
BLUETOOTH: 4.2
RANGE: 100 feet away

Introduction

RGB LED lighting now available! This durable and compact IPX7 waterproof Bluetooth speaker has a powerful 15W driver and a sizable passive subwoofer. The EcoRoam 30 boasts fantastic sound in a small form factor and is still durable enough for all kinds of outdoor activities. It includes a voice- activated EcoTalk button for Siri and Google. Your speaker becomes a party thanks to the LED lighting, which syncs colors and beats to the music.

HOW TO USE

Choose and start your music! To turn on or off, press the button once. Within 2-4 seconds, a green LED turns on, signaling that power has been fully begun and turned ON. To increase (+) or reduce (-) speaker volume, press and hold the button.

HOW TO KNOW IF SPEAKER IS CHARGED

A RED LED means that charging is taking place. When the battery is fully charged, a GREEN LED turns on. When approximately 30 minutes of gameplay are left, the Power LED will flash twice quickly every 30 seconds.

HOW TO RESET

Reset the Bluetooth on your audio device (phone or tablet), then select “forget this device” in the Bluetooth settings after selecting the gear or icon next to ECOXGEAR. Other Bluetooth connections can be deleted by turning Bluetooth on and off on your phone or tablet.

HOW TO SYNC TWO SPEAKERS

Your Bluetooth device (Smart Device) should be turned on and in pairing mode. There will be a list of Bluetooth connections available. On your Bluetooth device, choose the ECOXGEAR speaker from the list of devices that have been found. Wait a short while for the connection to complete.

HOW TO CONNECT TO PHONE

From the top of the screen, swipe downward.
Touch Bluetooth and hold it.
To pair a new device, tap. If Pair new device isn’t there, go under “Available devices” or hit More. Refresh.
Select the Bluetooth device you want to associate with your device by tapping its name.
Observe any directions displayed on the screen.

HOW TO FIX BLUETOOTH PAIRING PROBLEMS

Make sure Bluetooth is activated.
Find out the pairing method your device uses.
activate the discoverable mode.
Ensure that the two devices are sufficiently close to one another.
Turn the gadgets on and off again.
Eliminate previous Bluetooth connections.

Frequently Asked Questions

Why won’t my Ecoxgear speaker function?

If the speaker isn’t working, there can be a problem with the housing’s wiring. If so, it could be necessary to replace the wires or fix the wire connections.

What is the charging time for an Ecoxgear speaker?

From a low to a FULL charge, it typically takes 3 hours of charging. Your computer’s USB port or a power outlet with a USB to AC power adapter are two possibilities for power sources. Always be sure to use the USB cord that came with your ECOSTONE.

What is the Ecoxgear speaker’s wattage?

Rugged Waterproof Floating Portable Bluetooth Wireless 120-Watt Smart Speaker with Party Lights from ECOXGEAR is called the EcoBoulder MAX.

How long is the life of an ECOXGEAR battery?

About 7 hours will elapse between charges. Ecopebble measures 2.9″x2. 9″ by 2.8″.

Waterproof ECOXGEAR speakers are they?

from the producer. ECOXGEAR is an innovative audio, power, solar, and lighting firm that was established in San Diego, California, in 2010. It specializes in solutions that are tough, waterproof, and completely submersible.

Why is Bluetooth on my phone so quiet?

You may discover that your volume is too low because of the operating systems on some phones. The most popular solution for Android devices is to disable Bluetooth Absolute Volume in your phone’s settings. This might be found in your phone’s developer options for some devices.

Has ECOXGEAR a built-in antenna?

The handbook states that because the device’s antenna is inside, you must “move the complete product” if reception is poor. Bluetooth enables wireless audio streaming as well.

How can I connect a Bluetooth speaker to my laptop and play music?

Choose Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth from the Start menu on your computer. Select the device, adhere to any extra instructions that may pop up, and then click Done.

Can a laptop be connected to a Bluetooth speaker?

Make sure the speakers are discoverable, or set them to pairing mode, in order to connect Bluetooth speakers to any laptop. Normally, you’ll hold down the power or Bluetooth buttons for five seconds or so.

Why won’t my device pair?

If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.

Why won’t Bluetooth function?

You might need to erase the Bluetooth app’s cache and cached app data if it’s not correctly connecting to Android. Similar like every other programme on your phone, Bluetooth also briefly retains some data. Please go to settings to clear this.

Why are my speakers not producing any sound?

Check the connections for the speakers. Make sure your speakers are plugged in correctly by inspecting the connections on the back of the speaker. Reconnect any loose connections by plugging them in once more to maintain the connection. You could have a loose connection if your speaker isn’t working.

Does using a Bluetooth speaker require Internet access?

Instead of an internet connection, short-range radio waves are how Bluetooth operates. This means you don’t need a data plan or even a cellular connection for Bluetooth to function anywhere you have two compatible devices.

Is it possible for someone to use my Bluetooth without my knowledge?

If your Bluetooth device’s visibility is enabled, anyone with a connection to your Bluetooth could theoretically access your device without authorization.

On my Bluetooth speaker, where is the reset button located?

There is a tiny, pinhole button with the word “reset” on it in the device’s control section, frequently hidden by a rubber cover. To press this button, use a pencil or another pointed object. When you hear the gadget turn off, hold down the “volume down” and “power” keys simultaneously for around 6 seconds.