SEAFLO SFASP1-01 Alarm Switch Panel Instruction Manual
- June 1, 2024
- SEAFLO
Table of Contents
SEAFLO SFASP1-01 Alarm Switch Panel
Product Specifications
- Model Number: SFASP1-01, SFASP2-01
- Voltage: 12V DC, 24V DC
- Current: 20 Amps. Max, 10 Amps. Max
- Alarm Volume: 85DB
- Weight: 0.2KG
- Wire Gauge Size/Length: 16AWG/100mm
Product Usage Instructions
- Installation
1. Ensure all wire connections are above water level.
2. Use butt connectors and marine-grade sealant to prevent wire corrosion.
3. Connect red wires to positive terminals and black wires to negative terminals only.
4. Disconnect power from the system before working on the unit.-
Max Working Draw
The maximum working draw is 20A at 12V and 10A at 24V. -
Wiring Instructions
Refer to the wiring diagram provided in the manual for proper connections. -
Alarm Volume Adjustment
To adjust the alarm volume, refer to the specific instructions outlined in the manual.
FAQ (Frequently Asked Questions)
-
Q: Can I submerge the AlarmSwitchPanel underwater?
A: No, all wire connections must be kept above water level to prevent damage and ensure proper functioning. -
Q: What should I do if the alarm volume is too low?
A: Check the wiring connections and the power source. Ensure proper voltage is supplied to the unit.
Models
- SFASP1-01
- SFASP2-01
DIMENSION DRAWING
WIRING
STANDARD CONFIGURATIONS
Model Number
| Voltage| Current| Alarm volume| N.W.|
Wire Gauge Size/length
---|---|---|---|---|---
SFASP1-01| 12V DC| 20 Amps. Max| ≥85DB| 0.2KG| 16AWG/100mm
SFASP2-01| 24V DC| 10 Amps. Max| ≥85DB| 0.2KG| 16AWG/100mm
SAFETY WARNING
- Keep all wire connections above water level. Wires must be joined with butt connectors and a marine-grade sealant to prevent wire corrosion.
- Install red wires to the positive terminal only and black to the negative terminal only.
- Disconnect power from the system before working on the unit to avoid personal injury, damage to the surrounding environment and/or damage to the unit.
- Max working draw: 20A at 12V, 10A at 24V.