Simx DCT0018 Weatherproof Cowls Instruction Manual
- June 1, 2024
- Simx
Table of Contents
Simx DCT0018 Weatherproof Cowls
Specifications:
- Product Name: Manrose Weatherproof Cowls
- Models: DCT1031, DCT4400, DCT3618, DCT4316, DCT4323, DCT4350, DCT4261, DCT0019, DCT4299, DCT4572, DCT1995, DCT3611, DCT1030, DCT3614, DCT4399, DCT3615, DCT4324, DCT3616, DCT0018, DCT3617
- Material: Perimeter frame with fixing screws
- Recommended Installation: By a licensed building practitioner
Product Usage Instructions
- Inspect supplied fixing screws for suitability based on application and substrate.
- Apply suitable silicone sealant around the perimeter frame to ensure waterproofing.
- Secure the cowl to the substrate using the fixing screws or alternatively stainless steel fixings.
- Perform a visual inspection after installation to confirm weather tightness.
FAQ:
-
Q: Can I install the weatherproof cowl by myself?
A: Due to the complexity of building variables and cladding systems, it is recommended to have the product installed by a licensed building practitioner for optimal performance and safety. -
Q: What should I do if the supplied fixing screws are not suitable for my application?
A: In such cases, use alternative fixings manufactured from stainless steel to ensure proper installation and durability. -
Q: How often should I perform maintenance on the weatherproof cowl?
A: Regularly inspect the cowl for any signs of damage or wear, and reapply silicone sealant if necessary to maintain weather tightness.
INSTALLATION INSTRUCTIONS
Manrose Weatherproof Cowls
- This weatherproof cowl is supplied complete with a perimeter frame and four fixing screws.
- Ensure that the supplied fixing screws are suitable for the application and for the substrate that the cowl is being affixed to. Alternative fixings should be manufactured from stainless steel.
- The external frame surrounding the cowl must be waterproof with a suitable silicone sealant to ensure weather tightness.
- Once all four corners to the substrate are fixed using the supplied screws or suitable alternative fixings and the appropriate silicone sealant has been applied around all 4 sides of the perimeter frame a visual inspection must be made to confirm weather tightness.
This applies to the following products:
- DCT1031
- DCT4316
- DCT4261
- DCT4299
- DCT1995
- DCT1030
- DCT4399
- DCT4324
- DCT0018
- DCT4400
- DCT4323
- DCT0019
- DCT4572
- DCT3611
- DCT3614
- DCT3615
- DCT3616
- DCT3617
- DCT3618
- DCT4350
Due to the many building variables and different available cladding systems, we recommend that this product be installed by a licensed building practitioner. The information contained herein should be used strictly as a guideline only.
Specifications are subject to change without notice
sales@simx.co.nz |
www.manrose.co.nz
Distributed by Simx Limited
PUB1795 2311