NETGEAR FS726T ProSafe 24-port 10/100 Smart Switch Software Manual
- June 13, 2024
- NETGEAR
Table of Contents
NETGEAR FS726T ProSafe 24-port 10/100 Smart Switch
Introduction
A dependable and packed-with-features networking solution, the NETGEAR FS726T ProSafe 24-port 10/100 Smart Switch is made to meet the needs of small and medium-sized organizations. This switch delivers improved connection, efficiency, and security for your network infrastructure thanks to its large port capacity, sophisticated control features, and strong construction. The FS726T ProSafe Smart Switch offers the capabilities to simplify your network operations, whether your goal is to enhance network performance, introduce VLANs, or guarantee seamless communication between multiple devices.
Specifications
- Brand: NETGEAR
- Model: FS726T
- Ports: 24 10/100 Mbps ports
- Port Types: RJ-45 Ethernet
- Management: Web-based interface
- VLAN Support: Yes
- QoS (Quality of Service): Yes
- Port Mirroring: Yes
- Loop Detection: Yes
- Rack-Mountable: Yes
- Dimensions (W x D x H): 8.07 x 17.32 x 1.69 inches
- Weight: 5.50 lb
FAQ’s
What is the NETGEAR FS726T ProSafe Smart Switch used for?
The NETGEAR FS726T ProSafe Smart Switch, which provides cutting-edge capabilities for small to medium-sized enterprises, is used to increase and control network connectivity.
How many ports does the FS726T ProSafe Smart Switch have?
Each of the 24 ports on the FS726T ProSafe Smart Switch can handle data speeds of 10/100 Mbps.
Does this switch support Gigabit Ethernet (1000 Mbps) speeds?
No, the FS726T ProSafe Smart Switch only supports Gigabit Ethernet and only supports 10/100 Mbps speeds.
Is the switch manageable?
The FS726T ProSafe Smart Switch, which offers sophisticated management and configuration options, is a managed switch.
What management features does the switch offer?
For network optimization and monitoring, the switch offers capabilities including support for VLANs, QoS (Quality of Service), and port mirroring.
Can I use this switch for VoIP (Voice over IP) applications?
The FS726T ProSafe Smart Switch prioritizes voice traffic using QoS settings, hence it does enable VoIP deployments.
Is the switch rack-mountable?
The FS726T ProSafe Smart Switch can be installed in a data center or equipment room because it is rack-mountable.
Does the switch support link aggregation (port trunking)?
Link aggregation is not supported by the FS726T ProSafe Smart Switch, unfortunately.
Can I set up VLANs on this switch?
The switch does indeed allow VLANs (Virtual LANs) for network security and segmentation.
Is there a web-based interface for configuration?
Yes, a web-based interface may be used to configure the switch, making setup and management simple.
Does the switch support loop detection and prevention?
In order to prevent network loops, the FS726T ProSafe Smart Switch normally has loop detection and prevention capabilities.
What is the warranty period for the FS726T ProSafe Smart Switch?
The switch's warranty period may change. For particular warranty information, it is advised to consult the product documentation or get in touch with NETGEAR customer care.
Software Manual
References:NETGEAR FS726T ProSafe 24-port 10/100 Smart Switch – Device.report