Leader AB0336 Wireless Charger User Manual
- June 1, 2024
- Leader
Table of Contents
Leader AB0336 Wireless Charger
Product Overview
Wireless Charger
FCC statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
- Indicator Light
- Type-C
- Charging area
- Switch button
Important Safety Instructions
- This device has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules.
- These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- This device generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FAQ
Q: What should I do if the indicator light does not turn on?
A: Please check the power source and ensure proper connection with the wireless charger. If the issue persists, contact customer support.
Q: Can I use this charger with my non-wireless charging device?
A: No, this charger is specifically designed for wireless charging- enabled devices. Using it with non-compatible devices may result in damage.
Q: How do I know if my device is charging?
A: When your device is properly placed in the charging area of the wireless charger, the indicator light will illuminate, indicating that charging is in progress.
Product Overview
Specifications
- Input: DC 5V/2A, 9V/2A
- Wireless Output: DC 5V/1A, 9V/1.1A,9V/1.67A
- Working Distance: 2~4 mm
- Magnetic alignment was suitable for compatible devices only.
- Suitable for all mobile devices with Qi technology.
Operation
- Connect the cable to a USB port or a USB AC adapter.
- Put your Qi-compatible device on top of the wireless charger ensuring that it is face up and centrally positioned.
- Indicator Light
- Туре-С
- Charging area
- Switch button
Note: If your phone has a protective case you may need to remove it for a successful connection when using the wireless charger.
Important Safety Instructions
When using this product, basic precautions should always be followed, including the following:
- a. Read all the instructions before using the product.
- b. To reduce the risk of injury, close supervision is necessary when the product is used near children.
- c. Do not put your finger or hands into the product.
- d. Do not expose the product to rain or snow.
- e. Using the product incorrectly may result in the risk of fire or injury to persons.
- f. Do not use the product over its output rating.
- Overload outputs above the rating may result in a risk of fire or injury to persons.
- g. Do not use a product that is damaged or modified. Damaged or modified products may exhibit unpredictable behavior resulting in fire, explosion, and/or risk of injury.
- h. Do not disassemble the product. Take it to a qualified service person when services or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- i. Do not expose the product to fire or excessively high temperatures.
- Exposure to fire or temperature above 113°F (45°C) may cause an explosion.
- j. Have servicing performed by a qualified repair person using only identical replacement parts.
- This will ensure that the safety of the product is maintained.
- k. Switch off the product when not in use.
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Warning!
Not for use with AirPods®, AirPod Pros®, or other earphones with wireless
charging cases. AirPods and AirPod Pros are trademarks of Apple Inc.
registered in the U.S. and other countries.
The distance between the user and the products should be no less than 20cm
SAFETY WARNING
To prevent conditions that can lead to overheating, please make sure that the
wireless charging pad surface is free of all metal objects at all times, such
as coins or paper clips.
In addition, before charging, please remove anything metallic attached to the
back of the phone, such as battery cases, ring holders, or plates used for
mounting to magnetic phone holders.