LEADER ACCESSORIES AB0198 Ultra Thin Wireless Charging Pad Instruction Manual

LEADER ACCESSORIES AB0198 Ultra Thin Wireless Charging Pad

Product Information

• Specifications:
  • Item: SM-2819
  • Model: AB0198
• Features:
  • USB Input Cable
  • Wireless Charging Surface
• What’s included:

1. 1 x Wireless Charging Pad
2. 1 x Instruction Manual

Product Usage Instructions

• Precautions:
  • Read all the instructions before using the product.
  • Ensure close supervision when used near children to reduce the risk of injury.
  • Avoid exposing the device to moisture.
  • Do not exceed the output rating to prevent overload and potential risks.
  • Avoid disassembling the device; seek professional help if required for any repairs.
  • Do not overcharge your phone; remove it when fully charged to prevent overheating.
  • Avoid charging for more than 7 hours at a time.
  • Remove attachments on the back of your phone before charging on this device.
• Interference Precautions:
  • This equipment generates radio frequency energy. Follow these measures to prevent interference:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• FCC & IC Statements:
  • This device complies with FCC and IC regulations regarding interference. Ensure compliance to avoid operational issues.
• Warning:
  • Operate the device only as approved by the responsible party to avoid voiding user authority. Seek professional assistance if needed.
• FCC Radiation Exposure Statement:
  • This equipment meets Class B digital device standards per FCC Rules, protecting against harmful interference in residential settings.

FAQs

• Q: What should I do if the LED does not glow white when charging?
  • A: If the LED does not glow white, ensure that your device is compatible with wireless charging and no objects are obstructing the charging surface.

Features

1. USB Input Cable
2. Wireless Charging Surface

What’s included

• 1 x Wireless Charging Pad
• 1 x Instruction Manual

Tech Specifications

• Input power: 5V/1.5A
• Wireless Charging Output: 5V/1A

INSTRUCTIONS

1. Wireless Charging Function:
   • Connect the wireless charging pad to a power source using the USB input cable (1).
   • Once connected the LED indicator will flash WHITE once indicating the device is in standby mode and is ready to begin charging.
   • Place the wireless charging supported device on the charging surface(2), the device will begin to charge automatically.
   • (LED will glow WHITE when the device is charging).
   • Note: When wireless charging, if the LED indicator is flashing the device is either NOT a wireless charging device or there is an object between the device and the charging surface interfering with the charging process.

SAFETY PRECAUTIONS

1. WARNING- When using this product, basic precautions should always be followed, including the following:
2. Read all the instructions before using the product.
3. To reduce the risk of injury, close supervision is necessary when the product is used near children.
4. Do not expose the device to moisture.
5. Do not use the device above its output rating. Overloading outputs above the rating may result in a risk of fire or injury.
6. Do not use the device if damaged or modified.
7. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
8. Do not disassemble the device. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury.
9. Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 212°F may cause an explosion.
10. Have servicing performed by a qualified repair person using only identical replacement parts.
11. This will ensure that the safety of the product is maintained.
12. Do not overcharge the phone. The unit may get hot with excessive use. Remove the phone when it is fully charged. Never charge for more than 7 hours at a time.
13. Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove attachments from the phone before charging on this device.

FCC

FCC Statements
This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Warning:

1. Changes or modifications not expressly approved by the party responsible for
2. compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

IC Statement
This device contains licence-exempt transmitter (s)/receivers) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure Statement for IC This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance 10cm between the radiator & body. CAN ICES-3 (B) / NMB-3 (B) This Class B digital apparatus complies with Canadian ICES-003.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in mobile(min20cm) exposure conditions.

• Name of the Distributor: Bulletline Inc
• Address of the Distributor: 6301 East 10th Avenue, Suite 110
• Hialeah, FL 33013 USA.
• WWW.PCNA.COM.
• IC: 30190-AB0198
• FCC ID: 2BAUN-AB0198-1
• Made in Laos
• Paper from responsible sources

References

• PCNA | World's Leading Supplier of Customized and Personalized Hard Goods and Apparel

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>