LEADER ACCESSORIES 503530 Bamboo Bread Bin Small Bread Box Storage Space for Kitchen User Manual

Assembly Instruction
Mannual

ACCESSORIES 503530 Bamboo Bread Bin Small Bread Box Storage Space for

Kitchen

Please DO NOT overtighten the screw before fully assembled

Parts and Hardware Lists

Please note that there may be some extra screws inside the packages.

If you have parts missing/damaged, please go to your order detail page to initiate the contact to us, we could get the hardware/parts replaced for you.

Please kindly keep this mannual.
You may encounter some problem while assembling or using our bread box, please refer to the last section – Frequently Asked Questions for further information.

Please DO NOT overtighten the screw before fully assembled

Step 1：
Vertically place the G Left board and fix the D Bottom Board by using B screws.
Double confirm the direction of G Left board is correct as the image shows.

Double confirm the D Bottom Board is correct, and the direction of the groove is upward

Step 2：
Insert E Back Board

Step 3：
Fix the H Rihgt Board by using B screws.

Step 4:
Fix the F Top Board by using B screws.

Step 5：
Install C knobs by A screws on both doors and remove the protective film on the doors.

Sometimes, the protective film may be a bit difficult to remove. In this case, please use use tweezer to get a small whole or pull the flim residues, then manually peel off or use scissor to cut off the remainder.

Frequently Asked Questions

1. Q: After assembly, the doors are not lined up or has gaps between boards. How coud I solve it?

A: For the misalignment, please have a try on the following procedure: 1. Please loose the B screws on Left and Right Boards and, 2. mannually lift the D Bottom Board to line up the door and, 3. re-assemble the B screws

2. Q: My bread go stale! How shall I do?

A: We recommend you add small bag or protective flim on the bread before storing them into our bread box. Keeping bread fresh requires a careful balance between airflow and humidity. You need to hold the moisture to prevent staleness, but if you stop ALL airflow, mold will grow much faster. Bread boxes are supposed to be a little less than air tight.

3. Q: I'm missing the hardware/knobs/screws or my product is defective broken board, etc.. How could I reconcile this situation?

A: We apologize for the inconvenience. For any missing parts, damages or warranty, please go to your order detail page to find your order information. There will be a place for you to initiate the contact to us. We are here and willing to help! Remember to check your spam mails so that you won't miss our message.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>