KOHLER K-13519 Manual 0.5 GPF Urinal Flushometer Owner’s Manual
- June 1, 2024
- Kohler
Table of Contents
KOHLER K-13519 Manual 0.5 GPF Urinal Flushometer
Product Information
Specifications
- Model: Manual 0.5 GPF Urinal Flushometer K-13519
- Flush Volume: 0.5 gallons per flush (GPF)
- Coupling Connection: 5/8″ (16 mm) 3/4 IPS Supply
- Dimensions:
- Minimum Height: 10-3/4″ (273 mm)
- Critical Level Above Fixture: 6″ (152 mm)
- Min-Max Spacing: 4-3/8″ (111 mm) – 5″ (127 mm)
- Max Height: 15-5/8″ (397 mm)
- Pressure/Fixture Supply Requirements:
- Fixture Pressure (static): Max 80 psi (551.6 kPa)
- Min Flowing Pressure: 25 psi (172.4 kPa)
- Min Flow Rate: 10 gpm (37.9 lpm)
- Compliance: ADA, OBC, CSA B651 compliant
Product Usage Instructions
Installation
- Follow the installation guide provided with the product for proper installation.
- Ensure the flushometer is installed at the recommended height and spacing above the fixture.
Coupling Connection
- Use a 5/8″ (16 mm) coupling connection for the flushometer.
- Connect the flushometer to a 3/4 IPS Supply for optimal performance.
Maintenance
- Regularly clean the flushometer using K-23723 Faucet cleaner for best results.
- Consider using the optional GP1118986 Flushometer Extension Kit for specific installation requirements.
FAQ
-
Q: Where can I find detailed warranty information?
A: For detailed warranty information, please visit our website at www.kohler.com for USA or www.kohler.ca for Canada. -
Q: What are the pressure and flow rate requirements for the flushometer?
A: The fixture pressure should not exceed 80 psi (551.6 kPa), with a minimum flowing pressure of 25 psi (172.4 kPa) and a minimum flow rate of 10 gpm (37.9 lpm).
Features
- Fixture-mount design
Material
- Brass
Technology
- Nonhold open piston technology for accurate activation
Installation
- Intended for urinal installations with 3/4″ (19 mm) spud coupling connection
Recommended Products/Accessories
K-23723 Faucet cleaner
Optional Products/Accessories
GP1118986 Flushometer Extension Kit
Codes/Standards
- ASME A112.18.1/CSA B125.1
- CSA B125.3
- CSA B64
- ASSE 1037/ASME A112.1037/CSA B125.37
- EPA WaterSense®
- ADA
- ICC/ANSI A117.1
- CSA B651
- OBC
- IAPMO Certification
KOHLER® One-Year Limited Warranty
See website for detailed warranty information.
INSTALLATION
*10-3/4″ (273 mm) minimum with a 6″ (152 mm) critical level above the fixture.
Technical Information
All product dimensions are nominal.
- Fixture pressure max (static): 80 psi (551.6 kPa)
- Min flowing pressure: 25 psi (172.4 kPa)
- Min flow rate: 10 gpm (37.9 lpm)
Notes
- Install this product according to the installation guide.
- ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada 2-25-2024 20:57 – US