Vgate OBD2 Scanner Tool iCar Pro User Guide
- June 1, 2024
- Vgate
Table of Contents
Vgate OBD2 Scanner Tool iCar Pro
Product Information
Specifications
- Brand: Vgate
- Model: iCar Pro Wi-Fi
- Supported Protocols: SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO 14230-4 KWP, ISO 15765-4 CAN
OBDII Protocols Supported by iCar Pro Wi-FiSAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO 14230-4 KWP, ISO 15765-4 CANCompatible Apps for iCar Pro Wi-FiOBD Fusion, Car Scanner ELM OBD2, tes.LAX, OBD JScan, OBD Auto Doctor, Dr.Prius, inCarDoc, etc.LED Indicator Status
- RED: Power Indicator – Light is on
- GREEN: OBD Indicator – Flashes once
- BLUE: Wi-Fi Indicator – Flashes once
Product Usage Instructions
Supported Apps
iCar Pro Wi-Fi is compatible with various OBD apps available for both iOS
and Android platforms. Some recommended apps include:
- OBD Fusion
- Car Scanner ELM OBD2
- tes.LAX
- OBD JScan
- OBD Auto Doctor
- Dr.Prius
- inCarDoc
- Carista OBD2
- Torque
iCar Pro Wi-Fi supports the standard OBD-II parameters (PID) as defined in SAE J1979 AUG2013 (app OBD AUTO DOCTOR).
| PID | Sensors |
|---|---|
| $01 | Status of the monitors since DTCs were cleared |
| $03 | Fuel system status |
| $04 | Calculated load value |
| $05 | Engine coolant temperature |
| $06, $08 | Short-term fuel trim |
| $07, $09 | Long-term fuel trim |
| $10 | Airflow rate from mass air flow sensor |
| $11 | Absolute throttle position, etc. |
Device Setup
Follow these steps to set up your iCar Pro Wi-Fi device:
Step 1: Vehicle Preparation
Turn the vehicle’s ignition to Key On, Engine Off position.
Step 2: Device Activation
The LED indicators on the device signify different statuses:
- RED: Power indicator (solid)
- GREEN: OBD indicator (blinks once)
- BLUE: Wi-Fi indicator (blinks once)
Device Connection
To connect iCar Pro Wi-Fi to your device:
iOS Connection:
Enable Wi-Fi on your iPhone or iPad.
Android Connection:
Enable Wi-Fi on your Android phone or tablet.
Supported Parameters and Sensors
iCar Pro Wi-Fi supports standard OBD-II parameters (PID) as per SAE J1979 AUG2013 and SAE J1979 AUG2014 standards. Some supported parameters include:
- $01 – Monitor status since DTCs cleared
- $03 – Fuel system status
- $04 – Calculated load value
- $05 – Engine coolant temperature
Understanding OBD Codes
Example of OBD Code Interpretation: P0123 – Throttle Position Sensor/Switch
A Circuit High Input
- Classification: Powertrain (engine and transmission)
- OBD Code Type: Generic
- Description: When the Throttle Position Sensor (TPS) has an input voltage higher than the normal upper limit, P0123 is set.
- For more information on OBD codes, visit: www.obd-codes.com/p0123
Product Upgrade Information
For PC: Visit www.vgatemall.com/downloadcenter to download the upgrade package and user manual for the corresponding model.
For Mobile Phone: Scan the QR code to download the VgateFwUpdater APP, then use the APP to scan the same QR code to upgrade the firmware.
Vgate Forums and Support
Join the discussion and get support at forum.vgatemall.com.
For further assistance, please email: sale@vgate.com.cn. Response is provided within 12 hours.
FCC and ISED Warnings
This device complies with part 15 of the FCC Rules and has been tested to
comply with the limits for a Class B digital device. Users should follow the
instructions to prevent radio interference. For Canadian users, this device
complies with RSS-102 RF exposure requirements.
FAQs
Where can I find more information about the OBD parameters supported by iCar
Pro Wi-Fi?
You can find detailed information about the supported OBD parameters at OBD
Auto Doctor website.
How do I pair the iCar Pro Wi-Fi with my iOS or Android device?
For iOS, enable WLAN on your iPhone or iPad and select V-LINK for the connection. For Android, enable Wi-Fi and select the V-LINK device from the list of available connections. Follow the specific app instructions for further setup.
What should I do if I experience interference with my device?
Try reorienting or relocating the receiving antenna, increasing separation between the equipment and receiver, or consulting a radio/TV technician for help.
What OBDII protocols does iCar Pro Wi-Fi support?
iCar Pro Wi-Fi supports SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO 14230-4 KWP, and ISO 15765-4 CAN protocols.
Which apps can I use with iCar Pro Wi-Fi?
Various OBD apps are compatible with iCar Pro Wi-Fi, including OBD Fusion, Car Scanner ELM OBD2, tes.LAX, OBD JScan, OBD Auto Doctor, Dr.Prius, inCarDoc, Carista OBD2, Torque, etc. Please check the official websites of these apps for updates and compatibility.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>