kogan com KAMN16QPA 16 Inch 2K IPS USB-C Portable Monitor User Guide
- June 15, 2024
- Kogan com
Table of Contents
USER GUIDE
16″ 2K IPS USB-C PORTABLE MONITOR (LEATHER CASE) KAMNI6QPA
COMPONENTS
OVERVIEW
A 3.5mm headphone
port
B Function selection button
C Power button
D Mini HDMI port
E Primory USB-C port
F Secondary USB-C port
Ports Introduction
| Port | Description |
|---|---|
| Full function USB- C ports | The all-in-one ports that supply power and |
transmit audio, image at same time.
Mini HDMI port| Transmit audio and image only.
3.5mm headphone port| Connect to speakers and headphones.
USING COVER CASE
The cover case has a built-in magnet that can be attached to the monitor.
Attach the case by following the below steps:
By using the cover case as a stand, the main unit can
be used at an angle as shown below:
CONNECTIVITY
Computer (Via USB-C)
This portable monitor can be connected to a compatible computer using the
supplied USB- C cable. This must be connected to the primary USB-C port on the
right side of the monitor. The computer will provide power and signal to the
monitor and can be used to miror or extend the computer screen.
Note:
When connecting the portable monitor and computer via USB-C, the brightness
of the monitor will automatically be set to low when connected to a computer
that supports reverse power supply.
It is recommended to use a power adapter with this portable monitor to achieve
optimal brightness and extended usage duration.
Mobile Phone (Via USB-C)
- Connect the supplied power adapter to the power port on the left side of the monitor and plug the power adapter into an electrical outlet.
- Connect one end of the supplied USB-C to USB-C cable to the primary USB-C port on the right side of the monitor, and the other end to the mobile phone or tablet.
Note:
When connecting the portable monitor and mobile phone via USB-C, the
brightness of the monitor will automatically be set to low when connected to a
mobile phone that supports reverse power supply.
It is recommended to use a power adapter with this portable monitor to achieve
optimal brightness and extended usage duration.
Computer (Via HDMI & Power Adapter)
- Connect the supplied power adapter to the power port on the left side of the monitor and plug the power adapter into an electrical outlet.
- Connect the HDMI end of the supplied mini HDMI to HDMI cable to the computer and the other end to the mini HDMI port on the right side of the portable monitor.
Note:
The power adapter is always required when the monitor is connected via a mini- HDMI to HDMI cable.
Other Devices (Via HDMI & USB-A to USB-C)
- Connect the supplied power adapter to the power port on the left side of the monitor and plug the power adapter into an electrical outlet.
- Connect the HDMI end of the supplied mini HDMI to HDMI cable to the device and the other end to the mini HDMI port on the right side of the portable monitor.
- Powering the monitor using the device (optional): Connect the USB-C end of the provided USB-C to USB-A cable to the primary USB port on the right side of the portable monitor. Then, connect the USB-A end to the device.
Notes When using this configuration, the power adapter is not required.
Note:
The power adapter is always required when the monitor is connected via a mini
HDMI to HDMI cable.
OPERATION
Turn the Monitor On/Off
- Press the power button to turn the portable monitor on.
- Press and hold the power button for 3 seconds to turn the portable monitor off.
On-Screen Display (OSD)
- Press the function selection button to enter the OSD menu.
- Roll the function selection button upward or downward to navigate the OSD menu and press it to confirm the selection.
- Press the power button to return to the previous menu.
Adjust The Brightness
- On the main meny, roll the function selection button upward to enter the brightness menu.
- Roll the function selection button upward or downward to adjust the brightness.
- Press the function selection button to confirm the selection.
Adjust The Volume
- On the main menu, roll the function selection button downward to enter the volume menu.
- Roll the function selection button upward or downward to adjust the volume.
- Press the function selection button to confirm the selection.
Compatible Computers
| Huawei | MateBook, MateBook X, MateBook X Pro, MateBook E |
|---|---|
| Apple | MacBook 12, MacBook Pro, MacBook Air, iPad Pro 2018 |
| Honor | Magic |
| Mi | Air12.5/13.3inch, Pro15.6-inch, Millet Game Book |
| Lenovo | ‘Yoga5 Pro, ThinkPadX1 Carkon 2017, Miix 720 |
| HP | PavilionX2, EliteBook Folio G1 |
| Dell | XPS13, XPS15 |
| Chromebook Pixel, Pixelbook Pen | |
| Asus | LingYao3, U306, U32iseries, U41000, ROG series |
| Microsoft | Surface Book2 |
| Razer | Blade Stealth |
Compatible Mobile Devices
Huawei| Mate10, MatelOPro, Mate20, Mate20Pro, Mate20X, P20, P20Pro,
HonorNotel0
---|---
Samsung| S8, S8+, S9, Note8, Note9
Smartisan| R1, Pro2s
OPPO| R17 Pro
Note:
This list of compatible devices is not comprehensive and interded only as a
guide.
Always refer to the device’s user manual to ensure it is compatible with an
external display.
SPECIFICATIONS
| Product | Portable monitor |
|---|---|
| Product size | 359 x 235 x 10.5mm (thickest 10mm) |
| Resolution | 2560 x 1600 |
| Colour | 262K 100% SRGB |
| Viewing angle | 1189/ R:89/T:89/D:89 (Typ.) (CR= 10) |
| Best perspective | Full view |
| Input interface | x1 Mini HDMI, x2 USB-C |
| Outputinterface | 3.5mm headphone port |
| Screenssize | 16 inch |
| Panel type | IPS |
| Aspect ratio | 16:10 |
| Colour temperature | 6800K |
| Contrast | 1000:01:00 |
| Brightness | 300 cd/m* |
| Speaker | Bulit-in dual speaker |
| System requirements | Devices with an HDMI output, computers with full USB-C |
video output capability
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>