OZOTECH M43-30078-REV-C 2.0 DI Dryer Instruction Manual
- June 1, 2024
- OZOTECH
Table of Contents
DI Dryer 2.0 Installation
and Operation Manual
M43-30078-REV-C 2.0 DI Dryer
Thank you for purchasing the Ozotech DI Dryer 2.0. The Desiccant Indicating (DI) Dryer is designed to provide the necessary dry air required for ideal ozone production of an Ozotech ozone generator. The DI Dryer can be used either in a negative (pulling air) or positive (pushing air) pressure application. As the moisture indicating media absorbs moisture it will change color from BLUE to PINK when saturated.
INSTALLATION INSTRUCTIONS
-
Open box and cross reference that you have received the correct equipment. Parts list below.
-
Install the mounting bracket to the dryer cap using the four flathead screws provided.
-
Mount the DI Dryer 2.0 within 4ft. (1.21 m) of the ozone generator, in a dry environment.
a. Mount vertically using appropriate anchors and fasteners.
b. Three mounting screws are provided. -
Remove the caps from the inlet and outlet barbed fittings.
-
Setup and tubing use cases (Diagrams below for visual reference)
a. If using the DI Dryer 2.0 in a negative pressure environment (i.e., when using a protein skimmer), connect an appropriate length of provided clear tubing from the ‘outlet’ fitting of the DI Dryer 2.0 to the inlet of a top- mount valve flow meter. Then connect the outlet of the flowmeter to the inlet of your ozone generator.
b. If using the DI Dryer 2.0 in a positive pressure environment (i.e., when using an ozone reactor), connect from your air pump/compressor ‘outlet’ to the ‘inlet’ fitting of the DI Dryer 2.0. Using the provided tubing, connect the outlet of the DI Dryer 2.0 to the inlet of a bottom-mount valve flow meter. Lastly, connect the outlet of the flow meter to the inlet of your ozone generator. -
Follow the manufacturer’s instructions for proper ozone generator installation. If using an Ozotech ozone generator with a venturi injector, be sure to carefully follow the venturi injector install/calibration guidelines.
NOTE: This document is provided with select Ozotech ozone generators and is also available for online download at ozotech.com/support.
SERVICING THE DESICCANT MEDIA
The desiccant media within the media cartridge may be regenerated when it
turns pink. To perform media regeneration, scan the following QR code and
follow the regeneration process:
https://qrco.de/desiccantrecharge
REPLACING THE MEDIA CARTRIDGE
In place of regenerating the media, pre-filled replacement cartridges may be
purchased to ensure maximum dryer service time. Use the following part number
and model description when ordering replacement cartridges from Ozotech, Inc.
or an authorized equipment dealer:
32099 – DI Dryer 2.0 Replacement Cartridge
Use the instructions and figures below for media cartridge replacement:
- Unscrew the DI Dryer 2.0 cartridge housing from the dryer cap and remove the media cartridge.
- Install the new media cartridge into the cartridge housing.
- Screw the cartridge housing onto the dryer cap and return the DI Dryer 2.0 to service.
SETUP AND TUBING USE CASES
Ozone Ecosystem with a Protein Skimmer-Option One
Ozone Ecosystem with a Protein Skimmer-Option Two
Ozone Ecosystem with an Ozone Reactor-Option One
Ozone Ecosystem with an Ozone Reactor-Option Two
PARTS LIST
- x1 DI Dryer 2.0 w/desiccant media cartridge installed
- x1 Mounting bracket
- x4 Mounting bracket screws
- x3 Wall mounting screws
- x1 3/16” barb x 3/16” barb tubing connector
- x1 3/16” barb x 1/4” barb tubing connector
- x1 Lubricant package and instructions
- x96” x 3/16” ID x 5/16” OD clear tubing
SUGGESTED AIRFLOW METER (TYPES)
Top mount valve airflow meter (negative pressure applications), 0-10 SCFH
flowmeter
Dwyer Part: MMF-10-TMV Mini Master Top Mount Flowmeter, 1-10 SCFH
Bottom mount valve airflow meter (positive pressure applications), 0-10 SCFH
flowmeter
Dwyer Part: MMF-10-PV Mini Master Bottom Mount Flowmeter, 1-10 SCFH
Flowmeter elbow adapter fitting
1/8″ MNPT x 3/16″ Hose ID Black HDPE
Adapter
If you have any questions about the installation and setup of the DI Dryer
2.0, please visit our website and click the support page for additional
information. Thank you again for purchasing the Ozotech DI Dryer 2.0.
M43-30078 REV C
Ozotech, Inc.
1015 South Main Street,
Yreka, CA 96097
Ph. 530.842.4189
ozotech.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>