KETTLER PNPA19021-0200 Panalsol Pagoda Instruction Manual

June 12, 2024
KETTLER

KETTLER-LOGO

KETTLER PNPA19021-0200 Panalsol Pagoda Instruction

Product Information

The Panalsol Pagoda 2.9m x 2.9m (PNPA19021-0200) is an outdoor structure that provides shade and shelter. It comes with a canopy and a sturdy frame made from metal. The product is designed for domestic use and is covered by a 3-year warranty against manufacturing faults.

Assembly Instructions

Before assembly, read through the instructions provided. Keep the packaging until you have checked that you have all the parts and fittings. Assemble the product on a soft surface and only use the recommended tools. All fittings should be finger tightened during initial assembly and fully tightened upon completion.

Parts List

  • 1 x Short Side Panel
  • 1 x Long Side Panel
  • 7 x Metal Frame Poles
  • 13 x Plastic Connectors
  • 3 x Canopy Support Poles
  • 4 x Canopy Support Pole Caps
  • 2 x Metal Washers
  • 8 x Plastic Washers
  • 54 x 6x15mm Allen Screws
  • 1 x Screw Cap Cover
  • 50 x Plastic Washers
  • 16 x Metal Washers

Usage Instructions

  1. Assemble the metal frame by connecting the poles with the plastic connectors provided.
  2. Attach the short and long side panels to the frame using the plastic connectors.
  3. Insert the canopy support poles into the plastic connectors on the frame.
  4. Attach the canopy support pole caps to the end of each support pole.
  5. Attach the canopy to the support poles using the plastic connectors provided.
  6. Secure the Panalsol to the ground surface or floor using appropriate fixings.
  7. To remove the canopy from the frame, unvelcro it at the top and slide it down. To put the canopy back on, reverse this process.

Maintenance and Care Instructions

Clean any sunscreens or oil-based products from the painted/varnished surfaces of the product immediately to prevent lasting discoloration. For safety, keep fittings out of children’s reach.
x3
x2
x16
Do not discard any of the packaging until you have checked that you have all the parts and the pack of fixings. Helpful advice before you begin:

  1. We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
  2. Do not discard any of the packaging until you have checked that you have all the parts and the pack of fittings.
  3. Assemble this product on a soft surface.
  4. To ensure an easier assembly, we strongly advise that all fittings are only finger tightened during initial assembly. Only upon completion of the assembly should all fixing points be fully tightened.
  5. Keep fittings out of children’s reach.
  6. Do not use any other tools other than those recommended to build this product.
  7.  Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler.
  8.  In the unlikely event that this product has missing or damaged parts, please visit our website www.kettler.co.uk

IMPORTANT
PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE.
THIS IS IMPORTANT INFORMATION REGARDING THE USE AND CARE OF YOUR PANASOL PAGODA.

Parts List

KETTLER-PNPA19021-0200-Panalsol-Pagoda-Instruction-
FIG-2Do not discard any of the packaging until you have checked that you have all the parts and the pack of fixings

Helpful advice before you begin:

  1. We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
  2. Do not discard any of the packaging until you have checked that you have all the parts and the pack of fittings.
  3. Assemble this product on a soft surface.
  4. To ensure an easier assembly, we strongly advise that all fittings are only finger tightened during initial assembly. Only upon completion of the assembly should all fixing points be fully tightened.
  5. Keep fittings out of children’s reach.
  6. Do not use any other tools other than those recommended to build this product.
  7. Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler.
  8. In the unlikely event that this product has missing or damaged parts, please visit our website www.kettler.co.uk

Assembly

KETTLER-PNPA19021-0200-Panalsol-Pagoda-Instruction-
FIG-3KETTLER-PNPA19021-0200-Panalsol-
Pagoda-Instruction-FIG-4KETTLER-
PNPA19021-0200-Panalsol-Pagoda-Instruction-FIG-5KETTLER-PNPA19021-0200-Panalsol-Pagoda-Instruction-
FIG-6KETTLER-PNPA19021-0200-Panalsol-
Pagoda-Instruction-FIG-7KETTLER-
PNPA19021-0200-Panalsol-Pagoda-Instruction-FIG-8KETTLER-PNPA19021-0200-Panalsol-Pagoda-Instruction-
FIG-10KETTLER-PNPA19021-0200-Panalsol-
Pagoda-Instruction-FIG-11KETTLER-
PNPA19021-0200-Panalsol-Pagoda-Instruction-FIG-12www.kettler.co.uk/panalsol-pagoda-3x3mC

Maintenance and Care Instructions

  • For domestic use only. Any other use may affect the warranty.

  • Before assembling check whether all parts listed in the parts list have been delivered. Do not start assembling if parts are missing or damaged.

  • Assemble the Panalsol under normal weather conditions only. A partly assembled Panalsol is not fully stable in heavy winds or rain.

  • A failure to assemble this product correctly could cause damage or result in serious injury! Assemble on a flat surface. Before assembling make sure that you have enough space for the procedure.

  • A distance of at least two metres is required from buildings, bushes or other objects nearby. Keep the assembly instructions available at all times and follow each of the individual steps exactly.

  • Before assembling, lay the components down on the ground according to their numbering.
    This will make the assembly easier.

  • During assembly, be careful with all the parts of the assembly (do not walk on them or distort them) and beware of shearing and trapping risks.

  • Keep children and pets away while setting up the Panalsol. Store the tubes in a place out of reach of children.

  • Never set up in closed rooms. This Panalsol is for outdoor use only.

  • Try to place the Panalsol where it is protected from wind.

  • Do not light any fires in or near the Panalsol. Move away from fire and barbecues.

  • Do not affix any weights to the roof frame or the roof tension loops.

  • Always ensure that the canopy is tensioned to avoid any water collecting on the roof. When not in use, it is recommended to stow the canopy and fasten. It is recommended to remove the canopy and store in a dry environment between September – March.

  • Do not use the Panalsol in heavy winds or rain! When heavy rain or snow is expected, the canopy should be dismantled and stored in a dry environment.

  • Where there is strong wind or during the winter months, there may be some movement unless secured to the ground.

  • Please check the fittings on a regular basis and tighten screws if necessary. The top hinge of the parasol canopy should be maintained twice per year with a silicone spray.

  • To clean the frame, we recommend the Kettler Multi-purpose cleaner or alternatively wash with mild soapy water avoiding any harsh chemicals. The canopy can be cleaned with the Kettler fabric care kit. Both items are available to purchase from www.kettler.co.uk.

Attention
Please be aware that painted/varnished surfaces can be damaged by sunscreens and oil based products. If the surface of your Kettler leisure furniture comes into contact with sunscreens, the surface is to be cleaned without delay as described above. Only in this way can lasting discolouration of the surface by the ingredients of the sunscreen be prevented.

For Your Safety

  • This product may only be used for its intended purpose as furniture for residential properties.
  • Check all components regularly for correct function, damage and loose connections especially at the start of the season and at 1-2 month intervals dependent on use.
  • Damaged components may endanger your safety or shorten the life of the product. Replace all damaged parts immediately. Use only spare parts manufactured by Kettler. Should you wish to purchase spare parts, they can be ordered directly from: www.kettler.co.uk/shop
  • Kettler will not be responsible for damaged caused by improper use.

Attention

  • Whilst assembling this product keep out of the reach of children. (Choking hazard – contains small parts)
  • Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around.
  • Always dispose of packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!
  • We reserve the right to make changes for technical reasons.

3 Year Warranty

Warranty For Home Use
This product is covered by a 3 year warranty against manufacturing faults. This warranty applies to domestic use only. It does not cover commercial use, mis-use or accidental damage. To validate your warranty, register at www.kettler.co.uk and quote the product code from the front of this booklet.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals