Dongguan Jin Wen Hua Digital Technology L16 Beat Driven Light Show 50W Bluetooth Speaker User Guide
- June 6, 2024
- Dongguan Jin Wen Hua Digital Technology
Table of Contents
Dongguan Jin Wen Hua Digital Technology L16 Beat Driven Light Show 50W
Bluetooth Speaker
Introduction
Please fully charge the product before initial use
What you get
Spacification
Bluetooth ＿
NWaomrkeing Range
| MV5u0sic(ACuSBro)ra
80 feet
---|---
Output Power| 5(300WWs ubw oofe +2*1DW mid/tweet er d「ive s)
SLiNgRhting| 3>75dB
「 「
Modes
Charging Input| T pe-CDC 5V/ 2A
Batter| y2x4000mAh 3.7V 21700
Chargying Time| 35 Hrs
|
Control Buttons
Using your speaker
PAIRING A BLUETOOTH DEVICE
When turned on, the speaker will automatically enter pairing mode. Find “MusicAurora” and choose to connect on your device.
The _speaker will automatically connect to the last connected device if available. If not, the speaker will enter pairing mode. 0 Having connection problems? Use your Bluetooth device’s Bluetooth settings to remove/unpair all previously paired “MusicAurora” Bluetooth speakers and ensure they are less than l meter away from each other. Then try pairing again 0 To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.
CONNECTING VIA THE AUX JACK
PLAYING MUSIC FROM A MEMORY CARD
PAIRING TWO MUSICAURORA SPEAKERS
Place the two MusicAurora speakers within 10 meters of each other.
1. Turn both speakers on by long-pressing C) respectively.
2. Long press Q on one of your speakers, and you will hear a prompt tone from
the speaker. Then both speakers will enter TWS pairing mode.3. On your
Bluetooth device, turn on Bluetooth, tap “Musi
aurora” and pair. When the TWS pairing is successful, you will also hear a
prompt tone. Note 1) The indicator on the primary speaker will glow solid
blue , while that of the secondary speaker will flash every 5 seconds. 2) The
primary speaker will be played as the left channel, while the secondary
speaker will be played as the right channel.
- When you turn the speakers on the next time, they will automatically try to reconnect to your Bluetooth device.
- To disconnect your Bluetooth device, long press+ and -on the speaker at the same time
Charging your speaker
Maintenance and Care
- Before using your speaker, inspect the po「ts to make sure that they are clear of dust and debris before charging
- Use a soft cloth to clean your speaker. Never use any harsh chemicals or detergents. Make sure your speaker 1s dry before charging
- When your speaker is not in use, it should be stored 1n a cool, dry place.
- Never tug or yank on the USB charging cable while it is connected to your speaker. Connect and disconnect cables as carefully as possible
- Never expose your speaker to high temperatures or extreme cold
- Please recycle or dispose of your speaker properly based on the laws and rules of your municipality. Contact local recycling fac山ties and/or the manufacturer of your speaker for further information
One Year Warranty
- ZUCCHERO products are covered by a 12-month limited warranty, starting from the date of purchase. This warranty is not transferable and applies only to the original consumer purchaser.
- For quality-related issues, KUCCHERO will, at its sole option, repair or replace any KUCCHERO products that malfunction due to defective parts or workmanship at no charge to you Not Covered Under Warranty:
- Damage from outside sources
- Damage from misuse of products (including, but not limited to: falls, extreme temperatures, water, operating devices improperly, incorrect connections, incorrect battery use)
- Damage caused by accident, improper care, negligence, excessive wear, and tear, or imprope「installation or assembly cont「ary to any written installation instruction
- Items that have expired their warranty period
- Non-quality-related issues (after 30
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>