nordlux P00232-BS Explore Wall Spot Light Instruction Manual

: June 11, 2024
: nordlux

Table of Contents

nordlux P00232-BS Explore Wall Spot Light
Product Usage Instructions
FAQ
Installation Instructions
Safety Instructions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nordlux P00232-BS Explore Wall Spot Light

Product Usage Instructions

Mounting the Product

Identify a suitable location for mounting the product on the wall.
Ensure wall mounting screws are available (not included in the package).
Use the provided x2 screws and anchors to securely mount the product on the wall.

Powering On and Off

To turn the product on, switch to the “ON” position. To turn it off, switch to the “OFF” position.

Maintenance

For general maintenance, use a soft, dry cloth for dusting and a soft, damp cloth for removing stains.
Avoid using detergents or chemical reagents. Ensure all water has evaporated before switching on the product. Clean mouth-blown glass parts when cold.

FAQ

Q: Can I use any type of bulb with this product?
- A: No, the bulb is not included, and it is recommended to use a bulb with a maximum of 7W LED.
Q: How should I clean the mouth-blown glass parts?
- A: Clean the mouth-blown glass when cold using a soft, damp cloth. Avoid using any chemical cleaners.

Installation Instructions

Part A

Part B

Safety Instructions

Class II: The lamp is double-insulated and does not need to be connected to the yellow/green earth wire.
IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
X-connection: In the event of damage to the lamp wire, replace with a wire of the same type.
****The mounting instruction must not be discarded.
Do not exceed the maximum wattage.
IMPORTANT: Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your localelectricity authority for advice
Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.
General maintenance: Use a soft, dry cloth for dusting, and a soft, damp cloth to gently remove grease or similar stains. Never use any detergents or chemical reagents. Do not switch on the lamp before all the water has evaporated. Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary. This is to be seen as a natural consequence of the manual process and is what gives mouth-blown glass its character and organic look. Always clean mouth-blown glass when the glass is cold.