ELDOM INVEST Wall-Mounted Electric Convector Heater Instruction Manual
- June 13, 2024
- ELDOM INVEST
Table of Contents
ELDOM INVEST Wall-Mounted Electric Convector Heater Instruction Manual
WARNING! Connecting the convector heater to the Internet is optional and
is not specifically required for the operation of the convector heater as
intended!
WARNING! These instructions form an integral part of the manual which
provides information on the operation of your convector heater with electronic
control.
WARNING! The availability of a WiFi module in the electronic control of
the convector heater is designated in the model number:
- RHxxWxxW-x“ / „RHxxNW“ – the convector heater has a WiFi module
CONNECTING THE WIFI MODULE TO THE INTERNET
Terms used in this Manual:
- module“ – the WiFi module of the electronic thermoregulator (electronic control) of your convector heater.
- regulator“ – the electronic thermoregulator (electronic control) of your convector heater.
- device“ – a smartphone, tablet or laptop, which is used to connect the WiFi module to the Internet and to enable its remote control and monitoring.
- WiFi network“ – the wireless network (WiFi) created by the module.
- network“ – the wireless network (WiFi) to which you want to connect the module. It is created by a router/modem, must have internet access and be near the unit.
- system“ – the Eldom web-based remote control and monitoring system.
ATTENTION! The module is connected to the regulator and is controlled by
it!
ATTENTION! You must connect the module to the Internet to enable the
remote control and monitoring of the unit operation!
ATTENTION! You need a device to connect the module to the system.
ATTENTION! You need to download the Eldom application on your device
from Google Play or Аpp Store. The minimum version of the Android operating
system on your device is 8.0.
ATTENTION! You need to have a registration (account) in the Eldom
application in order to control and monitor the operation of your convector
heater.
The module is connected to the Internet in 3 main steps. Subsequent remote control and monitoring of unit operation is implemented through the system.
STEP :1. CREATING AWIFI NETWORK BYTHE MODULE
- In the New WiFi Networkmenu select mode AP On.
STEP :2. CONNECTING THE DEVICE TO THE MODULE
- Disable the internet connection of the device.
- Enable the GPS location service of the device.
- Activate the WiFi module of the device and connect it with the network created by the module (ELD-….).
- The password is: Incotex123
- If the device does not find the WiFi network created by the module, please repeat step 1 or restart the WiFi module on the device (turn it off and on again).
- If the device and module are connected successfully, the screen of the regulator will display the Internet connection symbol.
STEP3. CONNECTING THE MODULE TO THE INTERNET, THROUGH THE DEVICE.
- Start the Eldomapplication. Set the preferred language.
- Select the Local option
- Select Add New Device. Aconfirmation may be required to use the device location from the application. Permit the use.
- Select the appliance detected and confirm your selection with OK.
- The screen of the regulator will display a connection message. Press the OK button.
- The screen of the device will display the unit found. Select it.
- From the Syst.sett.menu of the application select Network Settings.
- In the “For connection via the Internet” section enter the network name/password.
- Save the entry. The screen of the device will display a brief message that the network is stored.
- Cut the connection between the module and device. Disable the WiFi on the device, connect it to another network or switch over to mobile data.
- In the New WiFi Networkmenu of the regulator, select mode WiFi On.
After these steps are implemented, your convector heater is connected to the
Eldom remote control and monitoring system. Subsequent control and monitoring
of unit operation is carried out by application option via the Internet.
It is possible for the “Added New Device” to be controlled by several devices
at the same time, as long as
the Eldom application is installed on them, and the application uses the same
registered user (account – username and password).
Wi-Fi Module
Radio frequency band
Maximum RF power
Number of channels
Modulation
Antenna type
Protocol
Speed
Certification 2014/53/EU
Hereby, Eldominvest Ltd. declares that the Electric convector with electronic
control and Wi-Fi module is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
https://eldominvest.com/en/EU-declaration-RH01W.html
