PRISMXR Carina D1 Magnetic Component Charging Dock User Guide

June 1, 2024
PRISMXR

PRISMXR Carina D1 Magnetic Component Charging Dock

PRISMXR Carina D1 Magnetic Component Charging Dock

Introduction

  1. Place the positioning bracket as shown in the picture the Quest 3 and make sure it remains stable and not moved.
  2. Remove the backing paper from the back of the magnetic positioning component and install it on the designated location on the positioning bracket. Watch out Be careful not to mount it in the wrong orientation.
  3. Hold the magnetic positioning component for approximately 10 Press and hold for seconds and then release. Remove then the positioning bracket.

Carina D1 Magnetic Component

  1. Magnetic Positioning Component
    Carina D1 Magnetic Component

  2. Positioning Bracket
    Carina D1 Magnetic Component

Set Up Magnetic Positioning Component on Quest 3

  1. Place the positioning bracket on the Quest 3 as shown in the image, ensuring it remains stable and will not move.
    Set Up Magnetic Positioning Component on Quest 3

  2. Remove the release paper from the back of the magnetic positioning component and install it at the designated spot on the positioning bracket. Be careful not to attach it to the wrong orientation.

Set Up Magnetic Positioning Component on Quest 3

  1. Press and hold the magnetic positioning component for approximately 10 seconds before releasing. Then, remove the positioning bracket.
    Set Up Magnetic Positioning Component on Quest 3

Customer Support

For more information, please visit www.prismxr.com/pages/support

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals