P1201 PrismXR Vega T1 Wireless VR Earbuds User Guide

P1201 PrismXR Vega T1 Wireless VR Earbuds User Guide

Wearing

3 sizes of ear ips: SIM/L, M is defaulf to be installed on the earbuds. « Select the ear tips that fit your ear best.

Power On (for your first-time use)

•  Open the charging case.
•  Place the earbuds into the charging case, and the LED indicator will beblue.
• The earbuds will automatically power on.

Paring with Dongle © Open the charging case.

• The earbuds will automatically enter pairing mode, and the LEDindicator will flash blue rapidly.
• Turn on the dongle by plugging into the VR headset, its LED indicator will also flash blue rapidly.
• The earbuds will automatically connect with the dongle.

Paring with Bluetooth Device

• Open the charging case.
• The earbuds will automatically enter Bluetooth pairing mode, and theLED indicator will flash blue rapidly.
• urn on the Bluetooth in your phone’s Settings.
•  Select “PrismXR Vega T1” from your device’s Bluetooth list to connect.
• The earbuds will connect to the Bluetooth device.

Controls Note:

• You can customize the controls via PrismXR App.
• Controls may vary when connected via the dongle i the console’ssystem is imcompatible.
• Under dual connection, controlling the Bluetooth device takes priority.

61 Left:

62 Right:

Playing While Charging

Note:
This device does not support data transmission. Please avoid attempting to connect a PC to your VR headset to stream usingaUSB-C cable.

•  You will need a charger that supports USB Power Delivery (PD).
  Without i, this function may not work properly.

VR Linking With PC

• Connect the link cable from a USB C port on your PC to your VR
  

• plug the dongle into another USB C port on your PC to use your

Safety Instruction Avoid dropping,

• Do not disassemble. Avoid extreme temperature. Use original or certified cables.
• Do not wear the product while charging, Do not use any corrosive cleaner or oil to clean. Do not use the product outdoors during thunderstorms,
• Keep out of the reach of children. The product contains small parts which may be a choking hazard.
• The battery shall not be exposed to excessive heat such as sunshine, fire or the like. Do not use the product in environments with too high or too low temperatures, and never expose the products to strong sunshine or very wet environments. Ensure there is no liquid, sweat or water on the charging port when charging, Earbuds’ waterproof level
• is IPX4, do not expose earbuds to dripping or splashing water. To avoid hearing damage, do not isten for extended periods at high volume
• Do ot turn the volume 5o high that you are unable to hear yoursurroundings. © Do not use earbuds while driving. © You should use caution or temporarily discontinue use in potentiallyhazardous situations. © The product generates stronger permanent magnetic fields that couldcause interference with cardiac pacemakers, implanted defibrillators.
• (ICDs) and other implants. Always maintain a distance of at least3.94″/10 cm between the product component containing the magnet(earbuds and charging case) and the cardiac pacemaker, implanteddefibrillator, or other implant.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject 1o the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or

(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party.Company Name: PRISMXR PTE, LTDAddress: 60 PAYA LEBAR ROAD #12-03 PAYA LEBAR SQUARE SINGAPORE,409051
RF warning statement:
‘The device has been evaluated to mest general RF exposurerequirement. The device can be used in portable exposure condition without restriction

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>