Klipsch R-800F Floorstanding Speaker Instruction Manual
- June 4, 2024
- Klipsch
Table of Contents
Klipsch R-800F Floorstanding Speaker Instruction
REFERENCE SPEAKERS
BEFORE YOU START
Some Klipsch® speakers have feet and other accessories that may need to be installed prior to use.
FLOOR STANDING SPEAKERS
ROOM PLACEMENT
Left and Right Main Channel Speakers — For optimum performance, Klipsch Group, Inc. (KGI) suggests placing your speakers 6 to 15 feet (1.8 to 4.6m) apart. They may also be toed-in slightly for better stereo imaging. The listening position should be about 1 to 1.5 times the distance separating the speakers. Refer to Figures 1 and 3 for connection and placement.
Center Channel sSpeaker — Center channel speakers are designed to place dialogue and primary sounds so that they appear to come from the video screen. The speakers should therefore be placed as close to the screen as possible, preferably directly on top of or below the screen. Refer to Figures 1, 2 and 3 for connection and placement.
Rear Surround Channel Speakers — Klipsch surround speakers should be placed approximately 2 feet above the listening position. Typically this will be about 5-7 feet above the floor. The surrounds should be placed on the walls directly adjacent to the listening position. Another option would be on the wall behind the listening position. The final surround speaker placement depends on your room’s characteristics. They are designed to recreate the sense of space and ambience that many of today’s surround sound technologies provide. Refer to Figures 1, 3 and 4 for connection and placement.
CONNECTION
Conventional Connection
Using 16-12 gauge speaker wire, connect the RED “positive” (+) terminal of the
LEFT speaker to the RED
“positive” (+) terminal of your amplifier’s LEFT channel. Connect the BLACK
“negative” (–) terminal of the LEFT speaker to the BLACK
“negative” (–) terminal of your amplifier’s LEFT channel.
Repeat the above procedure for connecting all remaining speakers to the
appropriate amplifier channels. Refer to Figure 3. Make sure that no bare
wires from any of the connections touch any other terminals as this could
cause a short and damage your equipment.
Amplifier Requirements
Klipsch speakers are highly efficient and will operate easily on a wide
variety of amplifiers. All Klipsch speakers are 8-ohm compatible and can be
driven to very high levels with low distortion. Due to the high output levels
Klipsch speakers are capable of reproducing, exercise caution with the volume
control. Excessive volume over long periods can permanently damage your
hearing. Overdriving your amplifier could also damage your speakers. Check
with your dealer or amplifier manual to make sure your particular amplifier is
best suited to your application. We want you listening for a lifetime.
FIGURE 1
SPEAKER PLACEMENT IN LISTENING AREA
FIGURE 2
CENTER CHANNEL
FIGURE 3
STANDARD CONNECTIONS
FIGURE 4
WALL MOUNTING SURROUND SPEAKERS
REFERENCE WITH DOLBY ATMOS TECHNOLOGY
ATMOS ELEVATION CHANNEL CONNECTION
WALL MOUNTING
CARE AND CLEANING
The only thing you should ever need to do to your speakers is dust them
occasionally. Never apply any abrasive or solvent-based cleaner or any harsh
detergent. You can clean the grilles with the brush attachment of a vacuum
cleaner.
PRODUCT REGISTRATION
Register your product online at www.klipsch.com/register
- Keep up-to-date on new products and promotions.
- Your personal information will never be resold.
- This registration information is not used for warranty purposes. Please retain your receipt for warranty claims.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>